List of SCI Journal Publications (Since January, 2021 Onward)

  1. Phadke, H. D., and Jaiswal, O. R. (2020). “Dynamic Response of Railway Track Resting on Variable Foundation Using Finite Element Method.” Arabian Journal for Science and Engineering, 45, 4823–4841. https://doi.org/ 10.1007/s13369-020-04360-6.
  2. Hingnekar, D.R. and Vyavahare, A.Y., (2020). “Mechanics of Shear Resistance in Steel Plate Girder: Critical Review.” Journal of Structural Engineering, 146(6), p.03120001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002484
  3. Pikle, N.K., Sathe, S.R. and Vyavahare, A.Y. (2021). Low occupancy high performance elemental products in assembly free FEM on GPU. Engineering with Computers, pp.1-16. https://doi.org/10.1007/s00366-021-01350-6
  4. Kumbhar, O.G., Kumar, R. and Farsangi, E.N. (2020).”Investigating the efficiency of DDBD approaches for RC buildings.” Structures, 27, 1501-1520. https://doi.org/10.1016/j.istruc.2020.07.015
  5. Bhat, R. A., and Gupta, L. M. (2020). “Moment-gradient factor for perforated cellular steel beams under lateral torsional buckling.” Arabian Journal for Science and Engineering, 45(10), 8727-8743. https://doi.org/10.1007/s13369-020-04836-5
  6. Dhanuskar, J. R., and Gupta, L. M. (2021). “Experimental Investigation of Block Shear Failure in a Single Angle Tension Member.” International Journal of Steel Structure, 20, 1636–1650. https://doi.org/10.1007/s13296-020-00398-2
  7. Bhat, R. A., and Gupta, L. M. (2021). “Interaction of Buckling Modes for Cellular Steel Beams Under Flexure.” International Journal of Steel Structures, 21(1), 260-273. https://doi.org/10.1007/s13296-020-00437-y
  8. Dhanuskar, J. R., and Gupta, L. M. (2021). “Shear Lag Effect in Welded Single Angle Tension Member.” International Journal of Steel Structure, 1-15. https://doi.org/10.1007/s13296-021-00482-1
  9. Nikose, T.J., and Sonparote R.S. (2021). “Application of Artificial Neural Network for Predicting Dynamic Along Wind Response of Tall Building.” Structural Design of Tall and Special Buildings, 30 (5), e1837. https://doi.org/10.1002/tal.1837
  10. Kulkarni, A. M., and Datta, D. (2020). “Reliability Based Assessment of Doubly Reinforced Beams for Limit State of Collapse.” Current Science, Indian Academy of Sciences. 119(6), 944-935. https://doi.org/10.18520/cs/v119/i6/944-953
  11. Parekar, S. D., and Datta, D. (2021). Seismic Evaluation of Vertically Irregular Steel Moment-Resisting Frames Under Mainshock–Aftershock Vibration. Journal of Vibration Engineering and Technologies, 1-19. https://doi.org/10.1007/s42417-021-00305-x
  12. Mandal J., Goel M. D., and Agarwal A. K. (2021). “Surface and Buried Explosions: An Explorative Review with Recent Advances”. Archives of Computational Methods in Engineering https://doi.org/10.1007/s11831-021-09553-2
  13. Mandal, J., Agarwal, A. K and Goel, M. D. (2020). “Numerical Modeling of Shallow Buried Tunnel Subjected to Surface Blast Loading”. Journal of Performance of Constructed Facilities, ASCE, 34 (6) https://doi.org/10.1061/(ASCE)CF.1943-5509.0001518
  14. Goel, M.D., Thimmesh, T., Payal Shirbhate, C. Bedon. (2020). “Enhanced Single Degree of Freedom Analysis of Thin Elastic Plates Subjected to Blast Loading Using an Energy-based Approach”. Advances in Civil Engineering, Volume 2020, Article ID 8825072, 29 pages, https://doi.org/10.1155/2020/8825072
  15. Goel M. D., Krishna Prasad Kallada and I. L. Muthreja. (2021). “An Abridged Review of Empirical Formulae for Computation of Penetration, Scabbing and Perforation Depth Under Projectile Impact”. Archives of Computational Methods in Engineering https://doi.org/10.1007/s11831-021-09533-6
  16. Goel M. D., Shivani Verma, Jagriti Mandal, Sandeep Panchal (2020). “Effect of Blast inside Tunnel on Surrounding Soil Mass, Tunnel Lining and Superstructure for Varying Shapes of Tunnel”. Underground Space (Published online) https://doi.org/10.1016/j.undsp.2021.01.003
  17. Shirbhate, P. A. and Goel M. D. (2020), “A critical review of blast wave parameters and approaches for blast load mitigation”, Archives of Computational Methods in Engineering, 28, 1713-1730. https://doi.org/10.1007/s11831-020-09436-y

List of Scopus Indexed Papers (Since January, 2021 Onward)

  1. Landge, M. V., and Ingle, R. K. (2021). “Comparative study of floor response spectra for regular and irregular buildings subjected to earthquake”, Asian Journal of Civil Engineering, 22(4), 49-58.
    https://doi.org/10.1007/s42107-020-00297-1
  2. Parekar, S. D., and Datta, D. (2020). “Seismic behaviour of stiffness irregular steel frames under mainshock–aftershock.” Asian Journal of Civil Engineering, 21(5), 857-870. https://doi.org/10.1007/s42107-020-00245-z
  3. Parekar, S. D., and Datta, D. (2021). “Evaluation of seismic performance of steel frames with stiffness irregularity subjected to mainshock–aftershock using equivalent single-degree-of-freedom system.” Innovative Infrastructure Solutions, 6(2), 1-16. https://doi.org/10.1007/s41062-020-00442-4
  4. Bhat, R. A., and Gupta, L. M. (2021). “Behaviour of hybrid steel beams with closely spaced web openings.” Asian Journal of Civil Engineering, 22(1), 93-100. https://doi.org/10.1007/s42107-020-00300-9
  5. Morkhade, S. G., Shirke, T., Mansuke, A., Chavan, M .U., Gupta L.M. (2021). “Experimental and Analytical Investigation of Castellated Steel Beams with Varying Openings Eccentricity.” J. Inst. Eng. India Ser. A (2021). https://doi.org/10.1007/s40030-021-00516-1
  6. Dhanuskar, J. R., and Gupta, L. M. (2021). “Behaviour of a single angle tension member welded at single leg and both legs.” Asian Journal of Civil Engineering.https://doi.org/10.1007/s42107-021-00372-1
  7. Mandal, J. Goel, M. D., and Agarwal, A. K. (2021). “Numerical Modeling of Tunnel Subjected to Surface Blast Loading”. In: Saha S.K., Mukherjee M. (eds) Recent Advances in Computational Mechanics and Simulations. Lecture Notes in Civil Engineering, vol 103. Springer, Singapore. https://doi.org/10.1007/978-981-15-8138-0_41
  8. Chordiya, Y. M., and Goel, M. D. (2021). “Low Velocity Impact Behavior of Carbon Nano-tubes Reinforced Aluminum Foams”. In: Saha S.K., Mukherjee M. (eds) Recent Advances in Computational Mechanics and Simulations. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-8315-5_6
  9. Phulari, V. S., and Goel, M. D. (2021). “Dynamic Response of Tunnel Under Blast Loading and Its Blast Mitigation Using CFRP as Protective Barrier”. In: Saha S.K., Mukherjee M. (eds) Recent Advances in Computational Mechanics and Simulations. Lecture Notes in Civil Engineering, vol 103. Springer, Singapore. https://doi.org/10.1007/978-981-15-8138-0_42
  10. Goel, M.D., Shivani Verma, Sandeep Panchal (2020). “Effect of Internal Blast on Tunnel Lining and Surrounding Soil”. Indian Geotechnical Journal, 51(2):359–368, https://doi.org/10.1007/s40098-020-00451-1
  11. T. Thimmesh, P.A. Shirbhate, J. Mandal, I.S. Sandhu, Goel, M.D., (2021). “Numerical Investigation on The Blast Resistance of a Door Panel”. Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 659-666. https://doi.org/10.1016/j.matpr.2020.10.607
  12. Goel, M. D., Choudhary, N. S., Panchal, S. (2020). “Resilient Sacrificial Protection System for Concrete Slab Under Blast Loading”. The Indian Concrete Journal, 2020, Vol. 94, No. 10, pp. 31-43.
  13. Shirbhate, P. A., and Goel, M.D. (2021). “Blast Mitigation Using Sandwich Panels With Saffil Foam”. Materials Today: Proceedings, Volume 44, Part 1, 2021, Pages 848-854. https://doi.org/10.1016/j.matpr.2020.10.786

  14. Swapneel Satone, Dhananjay Parbat, Devendra Pratap Singh, Dipali P. Jasudkar, and Goel, M.D. (2020). “Feasibility of Fly Ash for Manufacturing of Self Compacting Concrete”. Lecture Notes in Civil Engineering, L. M. Gupta et al. (eds.), Advances in Civil Engineering and Infrastructural Development, 87, pg. 719-724. https://doi.org/10.1007/978-981-15-6463-5_70

List of Books

  1. Godbole, P., Sonparote, R., & Dhote, S. (2014). Matrix methods of structural analysis. PHI Learning Pvt. Ltd..

List of Publications

  1. Pikle, N. K., Sathe, S. R., & Vyavahare, A. Y. (2018). High performance iterative elemental product strategy in assembly-free FEM on GPU with improved occupancy. Computing, 100(12), 1273-1297.

 

  1. Pikle, N. K., Sathe, S. R., & Vyavahare, A. Y. (2019). Accelerating the finite element analysis of functionally graded materials using fixed‐grid strategy on CUDA‐enabled GPUs. Concurrency and Computation: Practice and Experience, e5207.

 

  1. Patnana, V., Vyavahare, A. Y., & Gupta, L. M. (2019). Moment–Rotation Response for Semi-rigid Connections. Recent Advances in Structural Engineering, Volume 1 (pp. 313-326). Springer, Singapore.

 

  1. Kumar, S. S., & Vyavahare, A. Y. (2016). Measurement of internal force in frame member. International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) (pp. 2445-2450). IEEE.

 

  1. Sachin, P., & Vyavahare, A. Y. (2015). Effect of Gap on Strength of Fillet Weld Loaded in Out-of-Plane Bending. Advances in Structural Engineering (pp. 2409-2416). Springer, New Delhi.

 

  1. Patnana, V., & Vyavahare, A. Y. (2016). Moment rotation curves for semi rigid connections. International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) (pp. 2563-2568). IEEE.

 

  1. Bhanupratap, R., Goel, M.D., Chakraborty, T., Matsagar, V.A., Guegan, P., & Binetruy, C. (2019). Experimental and Numerical Investigation of High Strain Rate Behavior of CFRP Laminates, SN Applied Sciences.

 

  1. Palla, S., & Goel, M. D. (2019). Dynamic Response of Sacrificial Curved Steel Wall under Blast Loading, Lecture Notes in Mechanical Engineering Book – “Advances in Structural Integrity – Proceedings of ICONS-2018”.

 

  1. Chordiya, Y., & Goel, M. D. (2019). Drop Weight Impact Behavior of Tube Filled Polymeric Syntactic Foam, International Journal of Structural Glass and Advanced Materials Research, DOI: 10.3844/sgamrsp.2019.

 

  1. Chordiya, Y., & Goel, M. D. (2019) Low Velocity Impact Behavior of Aluminum Cenosphere Syntactic Foam, Material Today Proceedings: Elsevier.

 

  1. Chordiya, Y., & Goel, M. D., (2019) Low Velocity Impact Behavior of Closed Cell Aluminum Considering Effect of Foam Skin, Lecture notes in Mechanical Engineering: Springer.

 

  1. Chordiya, Y., & Goel, M. D. (2019) Numerical Stimulation of Low Impact Velocity Behavior of Polymeric Syntactic Foam, Advanced Science Letters.

 

  1. Chordiya, Y., & Goel, M.D., (2019) Numerical Simulation of Low Impact Velocity Behavior of Closed Aluminum Considering Effect of Skin, EURASIA Journal of Mathematics, Science and Technology Education.

 

  1. Sahu, S., Mondal, D.P., Cho J.U., Goel, M.D., & Ansari, M.Z. (2019). Low Velocity Impact Characteristics of Closed Cell AA2014-SiCp Composite Foam, Composite B, https://doi.org/10.1016/j.compositesb.2018.12.054

 

  1. Goel, M.D., Kumar, M., & Matsagar, V.A (2018), Blast Mitigation Analysis of Semi-Buried Structure, Civil Engineering Infrastructure Journal, 51(2), 445-460.

 

  1. Sahu, S., Mondal, D.P., Goel, M. D., & Ansari, M. Z., (2018). Finite element analysis of AA1100 elasto-plastic behaviour using Johnson-Cook model, Materials Today: Proceedings, 5 (2), Part 1, 5349–5353.

 

  1. Mondal, D. P., Goel, M.D., Upadhyay, V., Das, S., Singh, M., & Barnwal, A. K. (2018). Alumina Microballoons Reinforced Aluminum Syntactic Foam in Comparison with Cenosphere Reinforced Aluminum Syntactic Foam Made Through Liquid Metallurgy Technique,Transactions of Indian Institute of Metals, 71(3):56, 7–577.

 

  1. Maddigpu, P. R., Sawant, B., Wanjari, S., Goel, M. D., Vione, D., Dhodapkar, R. S., & Rayalu, S. (2018). Carbon nanoparticles for solar disinfection of Water, Journal of Hazardous Materials, 343, 157-165.

 

  1. Goel, M.D., Agrawal, D., & Choubey, A. (2017). Collapse Behavior of RCC Building under Blast Load. Procedia Engineering, 173, 1943-1950.

 

  1. Goel, M.D., & Rawat, U. (2017). Design and Analysis of Wing Structures of Micro Air Vehicles, Procedia Engineering, 173, 1602-1610.

 

  1. Goel, M.D., Pawar, P. (2017). Numerical Simulation of Anti-Ram Bollard under Vehicle Impact, Procedia Engineering, 173, 1595-1601.

 

  1. Goel, M.D., Pandharkar, A., & Hora, M. S. (2017). Numerical Simulation of Crushing and Energy Absorption Behavior of Twisted Tubes under Impact Loading, Procedia Engineering, 173, 1365-1373.

 

  1. Pandarkar, A. Goel, M.D., & Hora M.S. (2016). Axial Crushing of Hollow and Foam Filled Tubes: An Overview, Sadhana, doi: 10.1007/s12046-016-0525-4., 1-13.

 

  1. Morchhale, R.K. Goel, M.D., Patel, P., & Murali, S (2016). An Experimental Investigation on the Development of Saw Dust Polymer Composite for Door Shutter Application as a Substitute to Natural Wood, Asian Journal of Civil Engineering (BHRC), 17(3), 335-346.

 

  1. Goel, M.D. (2016). Aluminum Foam for Protective Packaging in Comparison with Polymeric Foams, Journal of Structural Engineering (JoSE), 43(3), 11-17.

 

  1. Choubey, A., Goel, M. D. (2016). Progressive Collapse Analysis of RCC Structures, International Journal of Optimization in Civil Engineering, 6(2), 287-301.

 

  1. Goel, M. D. (2016), Numerical investigation of the axial impact loading behaviour of single, double and stiffened circular tubes, International Journal of Crashworthiness, 21(1), 41-50.

 

  1. Jain, S. S., Ansari, A., & Mahajan, M. M. (2018). Effect of Material Proportions on the Strength of Pervious Concrete. Journal of Civil Engineering and Environmental Technology, Volume 5, Issue 7, pp. 518-522.

 

  1. Balaji, G., &Mahajan, M. M. (2018). Study of Machine Foundation with Base Isolation. Proceedings of 2ndInternational Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST), National Institute of Technology, Tiruchirappalli.

 

  1. Patel, M., &Mahajan, M. M. (2018). Influence of Mass Irregularity on Multi-storey Building. International Conference on Frontiers in Engineering, Applied Sciences and Technology (FEAST).

 

  1. Parmar, S. A., &Mahajan, M. M. (2018). Comparative Study of Various Design Codes for High Rise Building under Seismic Loads. International Conference on Innovative Realms in Civil Engineering (IRICE).

 

  1. Ansari, A., &Mahajan, M. M. (2017). Effect of Fine aggregate on Performance of Pervious Concrete. International Conference on Emerging Technology in Structural Engineering (ETSE), IJERMCE, Vol 2, Issue 3, ISSN 2456-1290.

 

  1. Ahmed, S., Ansari, A., &Mahajan, M. M. (2017). Validation of Experimental results using Software based on DEM. International Conference on Architecture Civil and Environmental Engineering (ACEE). (pp. 282-288)

 

  1. Kumar, A., & Mahajan, M. M. (2017). To Study Alternative for Segmental Box Girder Superstructure. International Conference on Architecture Civil and Environmental Engineering (ACEE).

 

  1. Mohan, M. R., & Mahajan, M. M. (2017). The Seismic Study of Frame Foundation for Rotary Machine. International Conference on Architecture Civil and Environmental Engineering (ACEE), 11th June, Jawaharlal Nehru University, New Delhi. Vol. 4, Issue 3, pp. 282-288.

 

  1. Chourasia, A., &Mahajan, M. M. (2016). Dynamic Response of Machine Foundation Supported on pile. International Conference on Architecture Civil and Environmental Engineering (ACEE). 28th May, Jawaharlal Nehru University, New Delhi. Vol. 3, Issue 4, pp. 303-308.

 

  1. Pawar, R., & Mahajan, M. M. (2016). Performance based evaluation of bridge superstructure with special reference to construction resources. International Conference on Architecture Civil and Environmental Engineering (ACEE) (pp. 529-534).

 

  1. Madhavi, G., & Mahajan, M. M. (2016). Critical study of Counterfort Retaining wall. International Conference on Architecture Civil and Environmental Engineering (ACEE) (pp. 479-485)

 

  1. Harkal, P., & Mahajan, M. M. (2015). Critical study of RCC balancing tank. International Conference on Advances in Science, Engineering and Technology.

 

  1. Nagrale, P., & Mahajan, M. M. (2015). Critical study of Midrise shear wall-frame structure. International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology (MECIT) (pp 54-57).

 

  1. Babu, D. S., & Mahajan, M. M. (2015). Study of Frame Foundation for Rotary Type Machine with Base Isolator. International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology (MECIT) (pp. 74-77).

 

  1. Dahasahasra, S., & Mahajan, M. M. (2017). Challenges in transforming intermittent water supply to 24×7 continuous supply – A case study of the Aurangabad city. Awwaindia Conference and Exhibition (AICE).

 

  1. Thakur,V. M. & Jaiswal, O R. (2019). An alternative formulation for optimum TMD parameters based on equal Eigen value criteria, Journal of Earthquake Engineering, https://doi.org/10.1080/13632469.2018.1559263

 

  1. Lakhade S. O., Kumar, R., & Jaiswal, O. R., (2018), Damage states of yielding and collapse for elevated water tanks supported on RC frame staging, Journal of Structural Engineering and Mechanics, Vol. 67, No. 6, 587-601.

 

  1. Jaiswal, O. R., Thakur, V. M. & Ghushe A. P. (2018), Tuned Mass Dampers to control oscillations of Wind-Sensitive Flexible Structures. The Bridge and Structural Engineer, 47(4):17-27.

 

  1. Mate, N. U., Bakre S. V., & Jaiswal, O. R. (2017), Seismic pounding response of Single-degree-of-freedom elastic and inelastic structures using passive tuned mass damper, International Journal of Civil Engineering, Springer, DoI 10.1007/s40999-017-0178-7. April 2017.

 

  1. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M., & Gandhi, P R. (2017). Characteristics of Gadhi Soil, Proceedings of the Institution of Civil Engineers – Construction Materials, Vol. 170 (1), pp 29-39

 

  1. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2015), Optimization of Gadhi Soil Mix for Adobe Brick, Electronic Journal of Geotechnical Engineering, Stillwater, USA, Vol. 20 [2015], Bund. 9 (Indexed by SCOPUS) ISSN 1089-3032, pp 3965-3972

 

  1. Mate, N. U., Bakre, S. V., & Jaiswal, O. R. (2015). Seismic pounding of adjacent linear elastic buildings with various contact mechanism for impact simulation. Asian Journal of Civil Engineering (BHRC), Iran, Vol 16, No. 3, 383-415.

 

  1. Syed, A., Sonparote, R. S. (2016). Development of a Self-Supported Portable Pre-Tensioning System for Slab Panels. Advances in Construction Technology and Management (January 21-23, 2016), VNIT, Nagpur.

 

  1. Syed, A. & Sonparote, R. S., (2016). Analysis of Prestressed Precast Concrete Pavement. Journal of Experimental and Applied Mechanics, 7 (1), 60-72.

 

  1. Syed, A. & Sonparote, R. S., (2016). Analysis of Prestressed Precast Concrete Pavement. International Conference on Recent Trends in Engineering and Material Sciences, 17-19 March 2016, Jaipur National University, Jaipur.

 

  1. Nikose, T. & Sonparote, R. S., (2016). Codal Comparison of IS 875 (Part 3): 1987 and IS 875 (Part3): 2015 for Dynamic Wind Response of Tall Buildings. International Conference on Recent Trends in Engineering and Material Sciences, 17-19 March 2016, Jaipur National University, Jaipur.

 

  1. Gharad, A. M. & Sonparote, R. S. (2017), Assessment of Resonance Effects on Railway Bridges Under Moving Loads. I-manager’s Journal on Structural Engineering, 5(4), p37-47.

 

  1. Syed, A., & Sonparote, R. S. (2017). Analysis of Prestressed Precast Concrete Pavement. MaterialsToday: Proceedings. Volume 4, Issue 9, Pages 9713-9717, ISSN 2214-7853.

 

  1. Syed, A. & Sonparote, R. S., (2019). Development and Early Age Performance of Prestressed Precast Concrete Pavement. Journal of Construction Engineering and Management (ASCE)

 

  1. Gharad, A. M. & Sonparote, R. S. (2019). Dynamic soil-structure interaction effects on3D integral railway bridge under high-speed moving loads. Current Science 116972-81

 

  1. Nikose, T. & Sonparote, R. S., (2018). Dynamic along wind response of tall buildings using Artificial Neural Network. Cluster Computing.

 

  1. Nikose, T. & Sonparote, R. S., (2018). Computing dynamic across wind response of tall buildings using artificial neural network. The Journal of Supercomputing.

 

  1. Mahajan, S., & Sonparote, R. S. (2018). Implementation of Comparative Visualization Pedagogy for Structural Dynamics. Computer Applications in Engineering Education 26 (5).

 

  1. Mahajan, S., & Sonparote, R. S. (2018). An Educational Tool to improve understanding of Structural Dynamics through Idealization of Physical Structure to Analytical Model. ComputerApplicationsin EngineeringEducation 26 (5).

 

  1. Gharad, A. M. & Sonparote, R. S. (2018). Study of direct finite element method of analyzing soil-structure interaction in a simply supported railway bridge subjected to resonance. Iranian Journal of Science and Technology.

 

  1. Gupta, L. M., Ronghe, G. N., & Dole, R. (2000). Optimum Design of Reinforced Concrete Beams Using Polynomial Optimization Technique, Journal of Advances in Structural EngineeringMulti Science Publishing, Vol 3, No. 1, page 67 – 80.

 

  1. Ronghe, G. N., & Gupta, L. M. (2002). Parametric Study of Tendon Profile in Prestressed Steel Plate Girder, Journal of Advances in Structural Engineering Multi Science Publishing, Vol 5, No. 2, page 75 – 85.

 

  1. Gupta Mohan, & Gupta, L. M., (2002). Discussion: AISC LRFD Rules for Block Shear in Bolted Connection – A Review, Journal of American Institute of Steel Construction (AISC), Vol 39, No. 4, pp 240.

 

  1. Gupta, L. M., Ronghe, G. N., & Naghate, M. K., (2003) ‘Behavior and Stability of Prestressed Steel Plate Girder for Torsional Buckling’, Journal of Steel and Composite Structures, Vol 3, No. 1, page 65 – 73.

 

  1. Gupta Mohan, & Gupta, L. M. (2004). Evaluation of Stress Distribution in Bolted Steel Angles under Tension, Electronic Journal of Structural Engineering, Vol 4 page 17 – 27.

 

  1. Deshpande, N. V., & Gupta, L. M. (2007). Experimental Study of Vrattayata Shape Silo Models, Journal of Advanced Steel Construction, Vol 3, No. 2, pp 584 – 594.

 

  1. Durga Prakash B., Gupta L. M., & Pachpor P. D. (2011). Strengthening of steel beam around rectangular web openings, International Journal of engineering science and technology ISSN:0975-5462, Vol 3, No. 2, pp 1130 – 1136.

 

  1. Pachpor, P. D., Gupta, L. M., & Deshpande, N. V., Bedi Komal. (2011). Parametric study of castellated beam, International Journal of Advanced Material Research ISSN:1662-8985, Vol –Advances in Structures 163-167, pp 842-845.

 

  1. Pachpor, P. D., Mittal, N. D., Gupta, L. M., & Deshpande, N. V. (2011). Finite element analysis and comparison of castellated and cellular beam, International Journal of Advanced Material ResearchISSN:1662-8985, 2011, Vol –Advances in materials and processing technologies II 264-265, pp 694-699.

 

  1. Gupta, L. M., Ronghe, G. N., & Khatri, A. P. (2012). Discussion of ‘behavior of Prestressed Steel Beams’ by B. Belletti and A. Gasperi, Journal of Structural Engineering, ASCE, pp 838.

 

  1. Hedaoo, N. A., Gupta, L. M., & Ronghe, G. N. (2012). Design of composite slabs with profile steel decking: A comparison between experimental and analytical study, Journal of Advanced Structural Engineering, Vol 3, No. 1, pp 1-15.

 

  1. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2013). Geotechnical Properties of Stabilized Ancient Gadhi Soil in Maharashtra State of India, Electronic Journal of Geotechnical Engineering, Stillwater, Vol. 18, Bund.V, pp 5289-5302. (Indexed by SCOPUS) ISSN 1089-3032

 

  1. Morkhade, S. G., & Gupta, L. M. (2013). Effect of load height on buckling resistance of steel beams. Procedia Engineering, 51, 151-158.

 

  1. Vyavahare, A. Y., & Gupta, L. M. (2014). Discussion of “Empirical Model of the Moment-Rotation Curve of Beam-to-Beam Bolted Flush Endplate Connections” by MR Mohamadi-Shooreh, M. Mofid, and SL McCabe. Journal of Structural Engineering, 140(7), 66-72.

 

  1. Joshi, A. S., & Gupta, L. M. (2014). Vehicle Collision on Bridge piers- Static and Dynamic Elasto Plastic Analysis – a Comparative Study. Journal of Structural Engineering, 41(3), 227-238.

 

  1. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M. (2015) Optimization of Gadhi Soil Mix for Adobe Brick, Electronic Journal of Geotechnical Engineering, Vol. 20, Bund. 9, pp 3965-3972. ISSN 1089-3032

 

  1. Morkhade, S. G., & Gupta, L. M. (2015). Analysis of steel I-beams with rectangular web openings: experimental and finite element investigation. Engineering Structures and Technologies, 7(1), 13-23.

 

  1. Morkhade, S. G., & Gupta, L. M. (2015). An experimental and parametric study on steel beams with web openings. International Journal of Advanced Structural Engineering(IJASE), 7(3), 249-260.

 

  1. Janyani, L., & Gupta, L. M. (2015). Vibration Analysis of Steel Metal Deck Floor. Journal of Basic and Applied Engineering Research, 8, 685-688.

 

  1. Morkhade, S. G., & Gupta, L. M. (2015). Experimental study and rotational capacity of steel beams with web openings. International Journal of Civil and Structural Engineering, 6(1), 58.

 

  1. Bhilawe, J. V., & Gupta, L. M. (2015). Experimental investigation of steel equal angle subjected to compression. Engineering Structures and Technologies, 7(2), 55-66.

 

  1. Hedaoo, N., Raut, N., & Gupta, L. M. (2015). Composite concrete slabs with profiled steel decking: comparison between experimental and simulation study. American Journal or Civil Engineering, 3(5), 157-169.

 

  1. Kondekar, V. G., Jaiswal, O. R., Gupta, L. M., Gandhi, P. R. (2016) Characteristics of Gadhi Soil, Themed Issue on Earthen Construction, Proceedings of the Institution of Civil Engineers: Construction Materials, UK. (DOI: 10.1680/jcoma.15.00033)

 

  1. Joshi, A.S., Hedaoo, N., & Gupta, L. M. (2015). Vessel Collisions on bridge piers: Simulation study for dynamic amplification factors. Int. J. Civil Engg. Tech., 6(9), 205-217.

 

  1. Gajrani, G., & Gupta, L. M. (2015). Behaviour and Analysis of Horizontally Curved Composite Steel Girder Bridge System. Journal of Mechanical and Civil Engineering, 45-52.

 

  1. Kondekar, V. G., Jaiswal, O. R., & Gupta, L. M. (2015). Optimization of Gadhi Soil Mix for Adobe Brick, Electronic Journal of Geotechnical Engineering, Stillwater, Vol. 20, Bund. 9 (Indexed by SCOPUS) ISSN 1089-3032, pp 3965-3972

 

  1. Kulkarni, A. S., & Gupta, L. M. (2017). Experimental investigation on flexural response of hybrid steel plate girder. KSCE Journal of Civil Engineering, 1-17.

 

  1. Morkhade, S. G., & Gupta, L. M. (2017). Experimental investigation for failure analysis of steel beams with web openings. Steel and Composite Structures, 23(6), 647-656.

 

  1. Morkhade, S. G., & Gupta, L. M. (2019). Ultimate load behaviour of steel beams with web openings. Australian Journal of structural Engineering, 20(2), 124-133.

 

  1. Kulkarni, A., & Gupta, L. M. (2019). Stable Length in Inelastic Design Considering Ductility Requirement. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 01-21.

 

  1. Kulkarni, A., & Gupta, L. M. (2019). Evaluation of Rotation Capacity of I-shaped Welded Steel Plate Girders. Arabian Journal for Science and Engineering, 44(5), 4533-4554.

 

  1. Dhanuskar, J. R. & Gupta, L. M. (2019). Behaviour of Block Shear Failure in Different Connections. Iranian Journal of Science and Technology, Transactions of Civil Engineering,DOI: 10.1007/s40996-019-00270-2.

 

  1. Gupta, L. M., Ronghe, G. N., & Panpate, A. S. (1999). Parametric Study of Prestressed unsymmetrical Steel Beams. Journal of Institution of Engineers. Vol 80, pp 94 – 100.

 

  1. Parlewar, P. M., & Gupta, L. M. (1999). An Investigation of Composite Space Truss. Journal of New Building Material and Construction, Vol 10, pp 90 – 92.

 

  1. Gupta, L. M., & Deshpande, N. V. (2000). Steel Silo Containers – Optimization In Shape (Technical Notes). Journal of Structural Engineering, Vol 27, No. 1, pp 55 – 59.

 

  1. Gupta, L. M., & Parlewar, P. M. (2001). An Investigation of Concrete In-filled Steel Box Columns, Journal of Structural Engineering, Vol 28, No. 1, pp 33 – 38.

 

  1. Gupta, L. M., & Ronghe, G. N. (2002). Study of Prestressed / Unpressurised and Symmetrical / Unsymmetrical Steel Plate Girder for Bridges. Journal of Steel in Construction of INSDAG KOLKATA, Vol 3, No. 1, pp 49 – 58.

 

  1. Gupta Mohan, & Gupta, L. M. (2002). Net Section Efficiency of Bolted Steel Angles Under Tension. Journal of Steel in Construction of INSDAG KOLKATA, Vol 3, No. 2, pp 71 – 77.

 

  1. Murthy, A. V., Hari Narayan, & Gupta, L. M. (2002). Analysis and Design of Prestressed Simply Supported / Continuous Steel Beams. Journal of Structural Engineering, Vol 29, No. 2, pp 129 – 134.

 

  1. Ronghe, G. N., & Gupta, L. M. (2002). Experimental Study of Prestressed Steel Bridge Plate Girder with Different Tendon Profiles. Journal of Indian National Group of the International Association for Bridge and Structural Engineering, Vol 32, No. 4, pp 1-21.

 

  1. Gupta Mohan, & Gupta, L. M. (2003). Limit State Design of Bolted Steel Angle Under Tension, Journal of Structural Engineering.

 

  1. Harde P. R., & Gupta, L. M. (2004). Behavior of Double Layer Grid Structure Under Wind and Thermal Effects. Journal of Steel in Construction of INSDAG KOLKATA, Vol 5, No. 2, pp 53–63.

 

  1. Deshpande, N. V., & Gupta, L. M. (2005). A New Shape for Steel Silo. Journal of Steel in Construction of insdag kolkata, Vol. 6, No. 2, pp 55 – 60.

 

  1. Hedaoo, N.A., Gupta, L. M., & Ronghe, G. N. (2007). Construction Methodology of Composite Slab with Steel Decking, Concrete India. Journal of the India Chapter of ACI, Vol. 22, No. 24, pp 15-19

 

  1. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2008). Preliminary Design of Cold-Formed Thin-Walled Trapezoidal Profiled Steel Deck – A Parametric Study, Steel in Construction. Journal of the INSDAG, Kolkata, Vol. 9, No. 2, pp 37-45.

 

  1. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2008). Time and Cost Evaluation of Construction of Steel Framed Composite Floor and RCC Flat Slab Structures. Bulletin of ACCE (I), pp 26-34.

 

  1. Hedaoo, N.A., Gupta, L.M., & Ronghe, G.N. (2009). Linear Finite Element Analysis of Profiled Steel Concrete Composite Deck, Steel in Construction. Journal of the INSDAG, Kolkata, Vol. 10, No. 1, pp 23-28.

 

  1. Joshi, A.S., & Gupta, L.M. (2010). Dynamic Amplification Factor for Rectangular and Hollow Circular Bridge Pier subjected to Ship collision. Highway Research Journal of IRC, pp 93-104.

 

  1. Harde, P.R., & Gupta, L.M. (2010). Effect of support conditions on the behaviour of double layer grids. IUP Journal of Structural Engineering, Vol-III, No-02, pp 22-33.

 

  1. Harde, P.R., & Gupta, L.M. (2011). Nonlinear analysis of double layer grid structures. Journal of Structural Engineering, Vol-38, No-3, pp 230-237

 

  1. Joshi, A.S., & Gupta, L.M. (2012). Elastoplastic response of bridge piers due to vehicle collision-A static approach. Journal of Structural Engineering, Vol-39, No-2, pp 193-209.

 

  1. Kulkarni, A., & Gupta, L. M. Plastic performance of hybrid steel girders -Numerical method. Journal of Structural Engineering, Structural Engineering Research Centre, Chennai

 

  1. Mahajan, A., Kumar, R., & Kumbhar, O. G. (2019). Comparative Study of Flat Slab-Column Connection Techniques for Seismic Loading. Recent Advances in Structural Engineering, Volume 1 (pp. 171-182). Springer, Singapore.

 

  1. Kumbhar, O. G., & Kumar, R. (2019). Effect of Modeling Assumptions on Seismic Performance of RC Building. Recent Advances in Structural Engineering, Volume 1 (pp. 73-84). Springer, Singapore.

 

  1. Swetha, J., Kumbhar, O. G., & Kumar, R. (2019). Performance Estimation of Solid and Punched Shear Wall Buildings with Two Modelling Techniques. In Recent Advances in Structural Engineering, Volume 1 (pp. 61-72). Springer, Singapore

 

  1. Lakhade, S. O., Kumar, R., & Jaiswal, O. R. (2017). Estimation of response reduction factor of RC frame staging in elevated water tanks using nonlinear static procedure. Structural Engineering and Mechanics, 62(2), 209-224.

 

  1. Kumbhar, O. G., Kumar, R., & Adhikary, S. (2015). Effect of staircase on seismic performance of RC frame building. Earthquakes and Structures, 9(2), 375-390.

 

  1. Smita, C., & Kumar, R. (2015). Comparison of Seismic Vulnerability of Buildings Designed for Higher Force Versus Higher Ductility. Advances in Structural Engineering (pp. 963-975). Springer, New Delhi

 

  1. Parate, K., & Kumar, R. (2019). Shear Strength Model for Reinforced Concrete Beam-Column Joints Based on Hybrid Approach. Computers and Concrete, Accepted for publication.

 

  1. Parate, K. and Kumar, R., (2019) “Shear strength criteria for design of RC beam–column joints in building codes”, Bulletin of Earthquake Engineering, 17, No. 3 1407–1493 https://doi.org/10.1007/s10518-018-0492-8

 

  1. Parate, K. and Kumar, R., (2019) “Simplified empirical model for shear strength of RC beam–column joints”, Asian Journal of Civil Engineering, 20, No. 1 87–111 https://doi.org/10.1007/s42107-018-0090-8

 

  1. Lakhade, S. O., Kumar, R., and Jaiswal, O. R., (2018). Damage states of yielding and collapse for elevated water tanks supported on RC frame staging, Structural Engineering and Mechanics, Vol. 67, No. (6)587-

 

  1. Parate, K. and Kumar, R., (2016). Investigation of shear strength models for exterior RC beam-column joint, Structural Engineering and Mechanics, Vol. 58, (3) 475-514.

 

  1. Kumar, R., and Singh, Y., (2010), Stiffness of RC Frame Members for Seismic Analysis, ACI Structural Journal, Vol. 107 (5) 607-615.

 

  1. Joshi, G. C., and Kumar, R., (2010), Preliminary Seismic Vulnerability Assessment of Mussoorie Town, Uttarakhand (India), Journal of Building Appraisal, Palgrave McMillan, Vol. 5 (4) 357-368.

 

  1. Kumar, R., Singh, Y., and Tripathi, S., (2011), Effect of Building Performance on Floor Response Spectra, Journal of Structural Engineering (JoSE), Vol. 37 (6) 421-425.

 

  1. Singh, Y., Rameshkumar. A., and Kumar, R., (2010), Seismic Evaluation and Retrofit of a Historical Masonry Building, Journal of the Institution of Engineers, Civil Engineering Division, Vol. 91, 23-30

 

  1. Patil, S. P., Singh, Y., Prasad, J. S. R., and Kumar, R., (2010), Seismic Performance and Vulnerability Assessment of URM School Buildings in Uttarakhand, The IUP Journal of Structural Engineering, Vol. 3 (2) 7-21.

 

  1. Singh, Y., Chakraborty, S., and Kumar, R., (2009), Efficacy of Base Isolation for Seismic Safety of URM Infills in RC Frame Buildings, The Icfai University Journal of Structural Engineering, Vol. 2 (3), 38-47

 

  1. Anand C. and Kumar, (2019), Performance Assessment of RC Columns Subjected to Non-Uniform Fire Exposure, National Conference on “Sustainable Infrastructure Development and Management, Department of Civil Engineering, VNIT Nagpur, Paper no. SIDM-86, 22-23 Feb 2019

 

  1. Kumbhar, O., and Kumar, R., (2018), Comparison of Seismic Demand Estimated by FBD, DDBD and EBD Approach for RC Buildings, 16th Symposium on Earthquake Engineering, IIT Roorkee, Paper no 199, Dec 2018.

 

  1. Lakhade, S. O., Kumar, R., and Jaiswal, O. R., (2018), Comparison of Seismic Performance of Frame Staging in Elevated Water Tank and Building Frame, 16th Symposium on Earthquake Engineering, IIT Roorkee, Paper no 213, Dec 2018

 

  1. Sivraj, S., Kumbhar, O. G., and Kumar, R., (2018). Comparison of various energy-based approaches for seismic design of RC frame structures, in Proceedings ofInternational Conference on Advances in Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee.

 

  1. Krishna, G. V., and Kumar, R., (2018). Issues in design of tall concrete buildings in India with references to IS 16700:2017 code, in Proceedings ofInternational Conference on Advances in Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee

 

  1. Gadilohar, S., and Kumar, R., (2018). Estimation of fire load in a building and procedure to ascertain safety of structural elements, in Proceedings ofInternational Conference on Advances in Construction Materials and Structures (ACMS- 2018), IIT Roorkee, Roorkee

 

  1. Kumbhar, O., Kriplani, S., and Kumar R., (2017) Assessment of Seismic Demand Estimated by Various DDBD Approaches, Indian Conference on Applied Mechanics(INCAM) 2017, MNNIT Allahabad, India 5 7 July 2017, 381-386.

 

  1. Hadole C., Kumar R., Kumbhar, O., (2017). Seismic Performance Assessment Of Fire Affected Reinforced Concrete Building Using Non-Linear Static Procedure., in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 187-191., Doi : 01.1617/vol4/iss3/pid71230.Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_71230.pdf

 

  1. Deoda, V., Kumar, R.,&Kumbhar, O. (2017). Seismic Performance Assessment of Pre-Stressed Precast RC Structure Using Non-Linear Static Procedure., in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 447-451, Doi: 01.1617/vol4/iss3/pid69540. Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_69540.pdf)\

 

  1. Lakhade, S. O., Kumar, R.,&Jaiswal, O. R.,(2017).,Effect of Modified Provisions of IS 1893 (Part 2):2014, on Design Base Shear of Elevated Water Tanks., Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 429-433, Doi: 01.1617/vol4/iss3/pid79538. Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_79538.pdf

 

  1. Marjive, S., Kumar, R.,& Gupta, L., (2017). Influence of Shape of Intermediate Web Stiffener in C-Lipped Cold-Formed Steel Channels on Buckling Strength., in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 375-379, Doi: 01.1617/vol4/iss3/pid30612. Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_30612.pdf

 

  1. Parate, K. & Kumar, R., (2017). Simplified Model for Shear Strength Prediction of RC Exterior Beam-Column Joints., in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 235-241, Doi: 01.1617/vol4/iss3/pid59180. Link:https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_59180.pdf

 

  1. Kriplani, S., Kumbhar, O., &Kumar R., (2017) Comparison of Various Direct Displacement Based Approaches for Seismic Design., in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 402-405, Doi: 01.1617/vol4/iss3/pid36179. (Link: https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_36179.pdf

 

  1. Ingole, S. J., &Kumar, R., (2017) Development of Scoring System for Seismic Vulnerability Assessment of Indian Model Building Types., International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017, IJERMCE, Vol. 2(3), 383-387, Doi: 01.1617/vol4/iss3/pid36904.(Link: https://technoarete.org/common_abstract/pdf/IJERMCE/v4/i3/Ext_36904.pdf

 

  1. Mahajan, A., Kumar, R. & Kumbhar O. G., (2016) Comparative study of flat slab-column connection techniques for seismic loading, Structural Engineering Convention 2016, CSIR-SERC, (2016) 166-171.

 

  1. Kumbhar, O. G. & Kumar, R., (2016). Effect Engineering of modeling assumptions on seismic performance of RC building, Structural Convention 2016, CSIR-SERC, (2016) 92-97.

 

  1. Swetha, J., Kumbhar, O. G. & Kumar, R., (2016). Performance estimation of solid and punched shear wall buildings with two modelling techniques, Structural Engineering Convention 2016, CSIR-SERC, (2016) 86-9

 

  1. Kumbhar, O., &Kumar, R., (2016). Impact of Local Stiffening Effect of Staircase on Global Behavior of Structure, in Proceedings of International Conference on Advances in Civil Infrastructure and Development of Smart Cities, Islampur, 2016.

 

  1. Adhikary, S., Singh, Y., Lang, D.H., & Kumar, R. (2015), Effect of Soil on Seismic Performance and Vulnerability of RC Frame Building, SECED 2015 Conference: Earthquake Risk and Engineering towards a Resilient World, 9-10 July, Cambridge, UK.

 

  1. Dubey, N., Sonparote, R. S. & Kumar, R. (2015), Effect of Construction Sequence Analysis on Seismic Performance of Tall Buildings, International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology, J.N.U., New Delhi, 16-17 May 2015.

 

  1. Parate, K. N., Kumar, R., & Bakre, S. V., (2014), A Review on Seismic Behavior of RC Beam-Column Joints, 15th Symposium on Earthquake Engineering, IIT Roorkee, pp. 836―846, Dec 2014

 

  1. Nayak, S. S., Kumar, R., & Sonporate, R. S., (2014), Effect of Staged Construction Analysis on Seismic Design and Performance of RC Buildings, 15th Symposium on Earthquake Engineering, IIT Roorkee, pp. 439―449, Dec 2014

 

  1. Samarth, D. D., Bakre, S. V., Kumar, R., (2014), Seismic Analysis of Adjacent Buildings Connected with Dampers, ICCBE 2014: International Conference on Civil and Building Engineering, Paris, France, June, 26-27.

 

  1. Kumar, R., Singh, Y, & Deoliya, R., (2012), Effect of Design & Detailing Deficiencies on Seismic Performance and Vulnerability of Indian RC Frame Buildings, Proc. 15 World Conference on Earthquake Engineering. 24-28 Sept. 2012, Lisbon, Portugal Paper No. 4739.

 

  1. Adhikary, Y. Singh, & R. Kumar (2010), Effect of Soil Amplification and Foundation Flexibility on Seismic Performance of a Four Story RC Frame Building, Proc. 14th Symposium on Earthquake Engineering, December 17-19, Indian Institute of Technology, Roorkee, pp. 1424-1433.

 

  1. Singh, Y., Kumar, R., & Putul Haldar (2009), Earthquake Resistant Design & Construction Practices in India, Second India Disaster Management Congress – IDMC 2009, November 4-6, Vigyan Bhaban, New Delhi, paper no. A1-SOA.

 

  1. Dadi, V. V. S. S. K, Kumar, R. & Joshi, G. C., (2009), Seismic Survey and Condition Assessment of Existing School Buildings in Uttarakhand, HDME 09, IIT Roorkee, Uttarakhand, April 18, 2009, pp. 69―80.

 

  1. Kumar, R., Singh Y, & Deoliya, R., (2009), Review of retrofitting techniques for masonry infilled RC frame buildings, Trends and Challenges in Structural engineering and Construction Technologies, Central Building Research Institute Roorkee (Uttarakhand), India February 11-12, 2009, pp. 284―

 

  1. Singh, Y., & Kumar, R., (2008), Performance of Structures During Past Earthquakes: Lessons for Construction Industry, International Conference on Construction – Managing Earthquake Risk, January 30―31, India Habitat Centre, New Delhi, India. pp. 367-377.

 

  1. Kumar, R., Singh, Y., & Paul, D.K. (2007), Design of Reinforced Concrete Jacketed Columns, National Conference on Emerging Trends in Civil Engineering – 07, SSIT, Tumkur, India. pp. 363―369.

 

  1. Nikam A., Kumar, R & Singh, Y., (2006), Strength and Ductility of Steel Confined and CFRP Confined RC Members”, 13 Symposium on Earthquake Engineering, DEQ-IITR, Roorkee, India. pp. 1353―1363.

 

  1. Kumar, R., Singh, Y., & Paul, K., (2004), Strength and Ductility of Jacketed RC Members, Indo-Taiwan Joint Workshop on Seismic Evaluation and Retrofit of Buildings, Silver Oak, habitat World at India Habitat Centre, New Delhi, Nov. 22-23, 2004. pp. 100―108.

 

  1. Paul, K., Singh, Y, & Kumar R. (2004) Seismic Safety of Hospital Building – A Case Study, Indo-Taiwan Joint Workshop on Seismic Evaluation and Retrofit of Buildings, Silver Oak, habitat World at India Habitat Centre, New Delhi, Nov. 22-23, 2004.pp. 52―64.

 

  1. Dubey, N., Sonparote, R. S. & Kumar R., (2014). Effect of Construction Sequence Analysis on Seismic Performance of Tall Buildings. International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology.

 

  1. Avinashe, G. A. & Sonparote, R. S., (2014). Use of Vb.Net For Design of Rcc Overhead Water Tank. Proceedings of 27th IRF International Conference.

 

  1. Dahake, S. M., Avinashe, G. A. & Sonparote R. S., (2014). Design of Footing subjected to biaxial Moment by using Visual Basic Application. International Conference on Advances in Civil and Mechanical Engineering Systems.

 

  1. Bajpai, A. & Sonparote, R. S. (2017). Development of Software for Analysis and Design of Pump House and Jack-Well. International Journal of Engineering Research in Mechanical and Civil Engineering, Vol. 2, Issue 3, p441-444.

 

  1. Bothra, S. & Sonparote, R. S. (2017). Optimized Modeling of Vehicle Induced Vibrations. International Journal of Engineering Research in Mechanical and Civil Engineering, Vol. 2, Issue 3, p393-396.