List of Publications in Reputed Journals

 

CAY (2018-19)(No. of Publications = 21)

 

Sr. No.AuthorsTitle of the PublicationJournal NameVolPgWoSScopus
1

Deshpande, Y.V., Andhare,

A.B., Padole, P.M.

How cryogenic techniques help in machining of nickel alloys? A reviewMachining Science and Technology22 (4)543-584SCIEYes
2

Gawande V.B., Dhoble A.S.,

Zodpe D.B., Mangrulkar C

A comparative analysis of thermo-hydraulic performance of a roughened solar air heater using various rib shapesAustralian Journal of Mechanical Engineering  ESCIYes
3

Gawande V.B., Dhoble A.S.,

Zodpe D.B., Mangrulkar C

Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughnessAustralian Journal of Mechanical Engineering  ESCIYes
4

Prasad V. Kane and

Atul B. Andhare

End of the Assembly Line Gearbox Fault Inspection using Artificial Neural Network and Support Vector MachinesInternational Journal of Acoustics and Vibration24 (1)68-84SCIEYes
5

Yogesh Deshpande

and Atul Andhare

Application of advanced algorithms for enhancement in machining performance of Inconel 718Indian Journal of Engineering and Material Sciences25366-376NONo
6

Neelesh Kumar Sahu and

Atul Andhare

Multiobjective Optimization for improving Machinability of Ti-6Al-4V using RSM and Advanced algorithmsJournal of Computational Design and Engineering, Manuscript Available online 10 May 20186 ESCIYes
7

Yogesh Deshpande,

Atul Andhare and Pramod Padole

Application of ANN to estimate surface roughness using cutting parameters, force, sound and vibration in turning off Inconel 718SN Applied Sciences 1-104 NONo
8

Dhananjay Katpatal,

Atul Andhare and

Pramod Padole

Viscosity behaviour and thermal conductivity prediction of CuO-Blend oil based nano-blended lubricantsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology   SCIEYes
9

Yogesh Deshpande,

Atul Andhare,

A. S. Chatpalliwar,

I.P. Keswani and

A. D. Urade

The energy efficient machining of Inconel 825 using cryogenically treated tools for optimization of surface roughnessInternational Journal of Mechanical and Production Engineering Research and Development9 (special issue)44-50NoYes
10H.P. Jawale, Ankur JaiswalInvestigation of mechanical error in four-bar mechanism under the effects of link toleranceJournal of the Brazilian Society of Mechanical Sciences and Engineering40383SCIEYes
11

Ranjit J Singha and

Trushar B Gohil

Influence of the Presence of the Lorentz Force and its Direction on the Suppression of Secondary Flow in Two Different Orifices: A Numerical Study using OpenFOAMJournal of Applied Fluid Mechanics12 (3)751-762SCIYes
12

Ranjit J Singha and

Trushar B Gohil

The numerical analysis on the development of Lorentz force and its directional effect on the suppression of buoyancy-driven flow and heat transfer using OpenFOAMComputers & Fluids179476-489SCIYes
13

Trushar B. Gohil,

Saha, Arun K.

POD analysis of a blooming jet at a moderate Reynolds numberJournal of Flow Visualization and Image Processing25(3-4)359-382NoYes
14

Shubham Dalvi, Snehal Bali,

Divyesh Nayka, Suraj H. Kale,

and Trushar B. Gohil

Numerical study of mixed convective heat transfer in a lid‐driven enclosure with rotating cylindersHeat Transfer—Asian Research48(4)1180-1203NoYes
15

Hemendra Patle, Mahendiran P,

B. Ratna Sunil and

Ravikumar Dumpala

Hardness and sliding wear characteristics of AA7075-T6 surface composites reinforced with B4C and MoS2 particlesMaterials Research Express  SCIEYes
16

Gaurav Durge, Aayush Chandak,

Abhimanyu Kumar Jaiswal,

Kommineni Uday Venkat Kiran,

B. Ratna Sunil and

Ravikumar Dumpala

Effect of heat treatment on the hardness and wear characteristics of NiCrBSi laser clad deposited on AISI410 stainless steelMaterials Research Express  SCIEYes
17

B Vandana, P Syamala,

D Sri Venugopal,

S R K Imran Sk,

B Venkateswarlu, M Jagannatham,

Marek KolenčíkI,

Ramakanth, Ravikumar Dumpala,

B Ratna Sunil

Magnesium/fish bone derived hydroxyapatite composites by friction stir processing: studies on mechanical behaviour and corrosion resistanceBulletin of Materials Science42122SCIEYes
18

Uday Venkat Kiran,

K., Arora, A., Ratna Sunil,

B., Dumpala, R.

Sliding wear characteristics of as-deposited and heat-treated electroless Ni-P coatings against AISI E52100 steel ballMaterials Research Express636401SCIEYes
19

Patel, V., Tiwari, G.,

Dumpala, R.

Effect of eccentric loading on energy absorbing circular cap and open end frusta tube structuresVacuum  SCIYes
20

G. Tiwari, M.A. Iqbal,

P.K. Gupta

Influence of Projectile Obliquity along with Target Span Diameter on Ballistic Response of Thin Aluminium 1100-H12 PlatesIranian Journal of Science and Technology, Transactions of Mechanical Engineering  SCIYes
21

Richa Agrawal, J. Veerababu, 

Sunil Goyal, R. Sandhya,

 Rashmi Uddanwadiker,  Pramod Padole,”

Estimation of Low Cycle Fatigue Response of 316 LN Stainless Steel in Presence of Notch”,Journal of Materials Engineering and Performance.   SCIYes

 

 

 

CAYm1 (2017-18) (No. of Publications = 69)

 

Sr. No.AuthorsTitle of the PublicationJournal NameVolPgWoSScopus
22Mahesh B Mawale, Abhaykumar Kuthe, Anupama M Mawale & Sandeep W DahakeDevelopment of an ear cap in chronic
suppurative otitis media using additive
manufacturing and TRIZ
Journal of Engineering In Medicine7733-738SCIYes
23Kulkarni, P., Dhoble, A., Padole, P.M.A review of research and recent trends in analysis of composite platesSadhana – Academy Proceedings in Engineering Sciences43 (6)96SCIEYes
24Sane, A.U., Padole, P.M., Manjunatha, C.M., Uddanwadiker, R.V., Jhunjhunwala, P.Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out loadJournal of the Brazilian Society of Mechanical Sciences and Engineering40 (3)167SCIEYes
25Sane, A., Peshwe, D.R., Manjunatha, C.M., Padole, P.M., Uddanwadiker, R.V.Evaluation of Progressive Failure of Composite T-Joint Using Mixed Mode Cohesive Zone ModelTransactions of the Indian Institute of Metals71 (2)445-451SCIEYes
26Agrawal, R., Veerababu, J., Goyal, S., Sandhya, R., Uddanwadiker, R., Padole, P.Estimation of Low Cycle Fatigue Response of 316 LN Stainless Steel in the Presence of NotchJournal of Materials Engineering and Performance27 (2)590-600SCIEYes
27Sane, A., Padole, P.M., Uddanwadiker, R.V.Progressive failure evaluation of composite skin-stiffener joints using node to surface interactions and CZMCMES – Computer Modeling in Engineering and Sciences115 (2)281-294SCIEYes
28Katpatal, D.C., Andhare, A.B., Padole, P.M., Khedkar, R.S.Study of dispersion stability and thermo-physical properties of CuO-Jatropha oil-based nanolubricantsJournal of the Brazilian Society of Mechanical Sciences and Engineering39 (9)3657-3668SCIEYes
29Kulkarni, P.A., Hu, W., Dhoble, A.S., Padole, P.M.Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loadsAdvances in Mechanical Engineering9 (9)26-JanNoYes
30Seema S Munjewar, Shashikant B Thombre, Awanikumar P PatiPassive direct alcohol fuel cell using methanol and 2-propanol mixture as a fuelIonics 11-JanSCIEYes
31RanjanMallick, S.B. Thombre, K. P. KothekarAn integral mathematical model of liquid feed passive DMFCs with non-isothermal effects and charge conservation phenomenonJournal of Cleaner Production182654-671SCIYes
32RS Shelke, SB Thombre, SR PatrikarStatus and perspectives of dyes used in dye sensitized solar cellsInternational Journal of Renewable Energy Resources3 (2)54-61NoYes
33RK Mallick, SB ThombrePerformance of passive DMFC with expanded metal mesh current collectorsElectrochemical Acta243299-309SCIYes
34Vikas Gohil, Y M PuriMulti-Objective Optimization of Material Removal Rate and Surface Roughness in Electrical Discharge Turning of Titanium Alloy (Ti-6Al-4V)”Indian Journal of Engineering & Materials Sciences.  SCIEYes
35AK Tiwari, VR KalamkarEffects of total head and solar radiation on the performance of solar water pumping systemRenewable Energy118919-927SCIEYes
36Rohan R Pande, Vilas R Kalamkar & Milind KshirsagarMaking the popular clean: improving the traditional multipot biomass cookstove in Maharashtra, IndiaEnvironment Development and Sustainability  SCIEYes
37Sanjay K Sharma, V. R. KalamkarNumerical Investigation of Convective Heat Transfer and Friction in Solar Air Heater with Thin RibsComputer Modeling in Engineering and Science114 (3)295-319SCIEYes
38Nitnaware P.T. and Suryawanshi J.G.Effects of Exhaust Gas Recirculation on Performance
and Emission Characteristic of SI Engine using Hydrogen and CNG Blends
Journal of institute of engineers india Series C  NoYes
39Girish Bhiogade and J.G. SuryawanshiEffect of external mixture formation and EGR Techniques on diesel fuelled PCCI engineJournal of institute of engineers India Series C  NoYes
40Roja Abraham Raju, Atul Andhare and Neelesh Kumar SahuPerformance of multi-walled carbon nano tube based nano fluid in turning operationMaterials and Manufacturing Processes32 (13)1490-1496SCIEYes
41Dhananjay Katpatal, Atul Andhare, Pramod Padole and Rohit KhedkarStudy of Dispersion Stability and Thermophysical Properties of CuO- Jatropha Oil Based NanolubricantsJournal of the Brazilian Society of Mechanical Sciences and Engineering39 (9)3657-3668SCIEYes
42Neelesh Kumar Sahu and Atul AndhareModelling and multi objective optimization for productivity improvement in high speed milling of Ti6Al4V using RSM and GAJournal of the Brazilian Society of Mechanical Sciences and Engineering39 (12)5069 – 5085SCIEYes
43Neelesh Kumar Sahu and Atul AndhareEvaluation of performance of nano fluid using multi walled carbon nano tubes for machining of Ti-6Al-4VMachining Science and Technology  SCIEYes
44Yogesh Deshpande, Atul Andhare and Pramod PadoleHow Cryogenic Techniques Help in Machining of Nickel Alloys? A ReviewMachining Science and Technology  SCIEYes
45Yogesh Deshpande, Atul Andhare and Pramod PadoleExperimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718Journal of the Brazilian Society of Mechanical Sciences and Engineering40 (6) SCIEYes
46Dhananjay Katpatal, Atul Andhare and Pramod PadoleEffect of CuO Nanoparticles on Rheological Behaviour of ISO VG46, Jatropha Oil and their blendJournal of Testing and Evaluation47 (4) SCIYes
47Parikshit Dumbhare, Shikha Dubey, Yogesh Deshpande, Atul Andhare and P. S. BarveModelling and multi objective optimization of surface roughness and kerf taper angle in abrasive jet machining of steelJournal of the Brazilian Society of Mechanical Sciences and Engineering40 (5) SCIEYes
48Tushar M. Sathe⁎, A.S. DhobleA review on recent advancements in photovoltaic thermal techniquesRenewable and Sustainable Energy Reviews76645-672SCIYes
49Amol Wadhawan, A.S. Dhoble, V.B. GawandeAnalysis of the effects of use of thermal energy
storage device (TESD) in solar air heater
Alexandria Engineering Journal  ESCI 
50P. A. Kulkarni, A. S. Dhoble, P. M. PadoleStatistical wind prediction and fatique analysis for HAWT composite material blade under dynamic loadsAdvances in Mechanical Engineering926-JanSCIEYes
51Sandeep Joshi, A. S. DhobleUse of silicone oil and coconut oil as liquid spectrum filters for BSPVT systems: with emphasis on degradation of liquids by sunlightJournal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation  SCIYes
52Jagesvar Verma, R V Taiwade, S G Sapate, A P Patil, A S DhobleEvaluation of Microstructure, Mechanical properties and corrosion resistance of friction stir-welded aluminium and Magnesium dissimilar alloysJournal of Material Engineering and Performance  SCIEYes
53Joshi, S.S., Dhoble, A.S., Sathe, T., Mangrulkar, C.Performance Analysis of Photovoltaic Thermal System Using Silicone Oil Spectrum FilterApplied Solar Energy   NO 
54Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Fale, S.G.Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughnessAustralian Journal of Mechanical Engineering    
55Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Fale, S.G.A comparative analysis of thermo-hydraulic performance of a roughened solar air heater using various rib shapesAustralian Journal of Mechanical Engineering    
56Kulkarni, P.A., Dhoble, A.S., Padole, P.M.Deep neural network-based wind speed forecasting and fatigue analysis of a large composite wind turbine bladeProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science  SCIE 
57Joshi, S.S., Dhoble, A.S.Use of Silicone Oil and Coconut Oil as Liquid Spectrum Filters for BSPVT: With Emphasis on Degradation of Liquids by SunlightJournal of Solar Energy Engineering, Transactions of the ASME  SCI 
58Kulkarni, P., Dhoble, A., Padole, P.M.A review of research and recent trends in analysis of composite platesSadhana – Academy Proceedings in Engineering Sciences  SCI 
59Sathe, T.M., Dhoble, A.S.Thermal management of low concentrated photovoltaic systems using extended surfaces in phase change materialsJournal of Renewable and Sustainable Energy  SCI 
60Joshi, S.S., Dhoble, A.S.Analytical approach for performance estimation of BSPVT system with liquid spectrum filtersEnergy  SCI 
61Joshi, S.S., Dhoble, A.SPhotovoltaic -Thermal systems (PVT): Technology review and future trendsRenewable and Sustainable Energy Reviews  SCI 
62Veer Alakshendra, Shital S. ChiddarwarSimultaneous balancing and Trajectory tracking control for an omnidirectional mobile robot with a cylinder using switching between two robust controllersSAGE International Journal of Advanced Robotic Systems14(6)16-JanSCIEYes
63Sahoo, S. R., Chiddarwar S.S., Veer AlekshendraIntuitive dynamic modelling and flatness based non-linear control of mobile robotSAGE Journal of Simulation: Transactions of the Society for Modeling and Simulation International  SCIEYes
64Khandekar, P.M., Chiddarwar S.S., and Jha, A.,Programming of an Industrial Robot Using Demonstrations and Soft Computing TechniquesJournal of Scientific and Industrial Research77(3)156-163SCIEYes
65Ankur Jaiswal, H.P. JawaleComparative study of four-bar hyperbolic function generation mechanism with four and five accuracy pointsArchive of Applied Mechanics (Springer)872037-2054SCIYes
66Mangesh S. KotambkarModal analysis of mistuned turbine blade packet due to combined blade and lacing wire damageInternational Journal of Acoustics and Vibration  SCIE 
67P.V. Kane and A.B. AndhareEnd of the Assembly Line Gearbox fault inspection using Artificial Neural Network & Support Vector MachinesInternational Journal of Acoustics and Vibration24 (1)68-84SCIEYes
68Lautre, N.K.,Sharma, A.K.,Pradeep, K.,Das, S.Experimental Evaluation of a Microwave Drilling Process in PerspexJournal of Testing and Evaluation48(4)IN pressSCIYes
69A. A. Thakre and A. K. SinghFrictional study of the soft and hard solid interface using Response surface methodologyJournal of Tribology (ASME)140(4)41601SCIEYes
70A. A. Thakre and A. K. SinghDetermination of work of adhesion of gelatin hydrogels on a glass substrateMaterials Research Express 2053-1591SCIEYes
71A. A. Thakre and A. K. SinghEnergy release rate of gelatin hydrogels on glass surface in direct shear sliding experimentsJournal of Adhesion Science and Technology32(17)1899-1910SCIYes
72A.A. Thakre and A.K. SinghAn experimental study on stick-slip of gelatin hydrogels using fracture mechanicsMaterials Research Express5 (8) SCIEYes
73A.A. Thakre and A.K. SinghSpecimen thickness dependency of energy release tate of a gelatine hydrogel and glass substrate interfaceJournal of Tribology (ASME)  SCIYes
74N. Sinha, A.K. Singh and T.N. SinghDynamic Stability of the Rate, State, Temprature, and Pore Pressure Friction Model at a Rock InterfacePure and Applied Geophysics 1420-9136SCIYes
75N. Sinha, A.K. Singh and T.N. SinghThe effect of inertia, viscous damping, temperature and normal stress on chaotic behavior of the rate and state friction modelJournal of Earth System ScienceSCIEYes
76V. Gupta and A.K. SinghStress relaxation at a gelatin hydrogel-glass interface in direct shear slidingModern Physics Letters B311750345-1-14SCIYes
77Gondane, S., A.K. Singh,  Vijayakumar, R.P.  and Sinha, N.The Effect of Carbon Nanotubes Based Nanolubricant on Stick–Slip BehaviorTransactions of the Indian Institute of Metals  SCIEYes
78Hemendra Patle, Ravikumar Dumpala, B. Ratna SunilMachining Characteristics and Corrosion Behavior of Grain Refined AZ91 Mg Alloy Produced by Friction Stir Processing: Role of Tool Pin ProfileTransactions of the Indian Institute of Metals71 (4)951–959SCIEYes
79Swetha Chowdary, Ravikumar Dumpala, Anand Kumar, Kondaiah V, Ratna SunilInfluence of heat treatment on the machinability and corrosion behavior of AZ91 Mg alloyJournal of Magnesium and Alloys6 (1)52-58SCIEYes
80N. Saikrishna, G. Pradeep Kumar Reddy, Balakrishnan Munirathinam, Ravikumar Dumpala, M. Jagannatham, B. Ratna SunilAn investigation on the hardness and corrosion behavior of MWCNT/Mg composites and grain refined MgJournal of Magnesium and Alloys6 (1)83-89SCIEYes
81B. Lakshmana Prasad, G. Neelaiah, M. Gopi Krishna, S.V.V. Ramana, K.Sai Prakash, G. Sarika, G. Pradeep Kumar Reddy, Ravikumar Dumpala, B. Ratna SunilJoining of AZ91 Mg alloy and Al6063 alloy sheets by friction stir weldingJournal of Magnesium and Alloys6 (1)71-76SCIEYes
82G. Tiwari, Tiju Thomas, R. P. KhandelwalInfluence of reinforcement in the honeycomb structures under axial compressive loadThin walled structure126238-245SCIYes
83G. Tiwari, M.A. Iqbal,P.K. GuptaEnergy absorption characteristics of thin aluminium plate against hemispherical nosed projectile impactThin walled structure126246-257SCIYes
84G. Tiwari, M.A. Iqbal,P.K. GuptaImpact response of thin aluminum plates and hemispherical shellsInternational Journal of Crashworthiness24 (4)413-428SCIYes
85Tiju Thomas, G. TiwariCrushing behavior of honeycomb structure-A ReviewInternational Journal of Crashworthiness  SCIYes
86Sane, A. U., Padole, P. M., Manjunatha, C. M., Uddanwadiker, R. V., & Jhunjhunwala, P.Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load.Journal of the Brazilian Society of Mechanical Sciences and Engineering,40 (3)167SCIEYes
87Sane, A., Padole, P. M., Uddanwadiker, R. V.Progressive failure evaluation of composite skin-stiffener joints using node to surface interactions and CZM.Computer Modeling in Engineering & Sciences (CMES) accepted  SCIYes
88Sane, A., Peshwe, D. R., Manjunatha, C. M., Padole, P. M., & Uddanwadiker, R. V.Evaluation of Progressive Failure of Composite T-Joint Using Mixed Mode Cohesive Zone Model.Transactions of the Indian Institute of Metals71(2)445-451SCIYes
89Sanjay B. Ingole and Animesh ChatterjeeJoint stiffness identification: A three-parameter joint model of cantilever beamInternational Journal of Acoustics and Vibrations  SCIYes
90T. Vaidya, Animesh ChatterjeeVibration of road bridges under moving vehicles: A comparative study between single contact point and two contact point modelsTransactions of the Canadian Society for Mechanical Engineering    

 

CAYm2 (2016-17) (No. of Publications = 43)

 

S. No.AuthorsTitle of the PublicationJournal NameVolPgWoSScopus
91Sapkal Pranav, Shraddha Jaiswal, Abhaykumar Kuthe.Rapid Prototyping Assisted Scaffold Fabrication for Bone Tissue
Regeneration
Journal of Materials Science and Research579-95NoNo
92Sandeep Dahake, Abhaykumar Kuthe, Mahesh MawaleApplications of medical rapid prototyping (MRP) assisted customized surgical guides (CSG) in complex surgeriesRapid prototyping journal, Emerald.22 SCIEYes
93Pranav S. Sapkal, Abhaykumar
M. Kuthe, Rajpal S. Kashyap, Amit
R. Nayak, Sudhanshu A. Kuthe & Anuja
P. Kawle
Indirect casting of patient-speciic tricalcium phosphate zirconia
scafolds for bone tissue regeneration using rapid prototyping
methodology
Journal of Porous Materials 11-JanSCIYes
94K. P. Kothekar, S.B. Thombre, RanjanMallickEstimation of Kinetic and electric parameters of liquid feed passive DMFCsInternational Journal of Hydrogen energy42 (38)24358-24371SCIYes
95HS Deshmukh, SB ThombreSolar distillation with single basin solar still using sensible heat storage materialsDesalination41091-98SCIYes
96Seema S Munjewar, Shashikant B Thombre, Ranjan K MallickApproaches to overcome the barrier issues of passive direct methanol fuel cell–ReviewRenewable and Sustainable Energy Reviews671087-1104SCIYes
97Seema S Munjewar, Shashikant B Thombre, Ranjan K MallickA comprehensive review on recent material development of passive direct methanol fuel cellIonics2318-Jan Yes
98Bhele S.K., Thombre S.B., Deshpande N.V.Investigation of the spray and flame structure Characteristics of Jatropha Biodiesel using simplex air blast atomizerJournal of basic and applied research International19 (2)118-127 Yes
99Bhele S.K., Thombre S.B., Deshpande N.V.Experimental Investigations on Combustion Characteristics of Jatropha Biodiesel (JME) and its diesel blends for tubular combustor applicationAdvances in Automobile Engineering   No
100Ranjan K Mallick, Shashikant B Thombre, Ramani V Motghare, Rakesh R ChillawarAnalysis of the clamping effects on the passive direct methanol fuel cell performance using electrochemical impedance spectroscopyElectrochemical Acta215150–161SCIYes
101Ingole, S.B., Chatterjee, A.Joint stiffness identification: A three-parameter joint model of cantilever beamJournal of Acoustics and Vibrations 13-MarSCIYes
102Tanuja Vaidya and Animesh ChatterjeeA comparative study between single contact point and two contact point modelsTransactions of the Canadian Society for Mechanical Engineering4199-111SCIYes
103Animesh Chatterjee, M S KotambkarModeling and investigation of modal properties under crack induced mistuning in a turbine blade packetAdvances in Vibration Engineering (Current: Journal of Vibration Engineering and Technologies)16(4)335 348SCIEYes
104D B Meshram, Y M PuriReview of research work in die sinking EDM for machining curved holeJournal of the Brazilian society of Mechanical Sciences and Engineering39,
(7)
2593–2605SCIEYes
105Vikas Gohil, Y M PuriStatistical Analysis of material removal rate and Surface roughness in Electrical Discharge Turning of titanium Ti-6Al-4V alloyJournal of Engineering Manufacture Part B  SCINo
106Vikas Gohil, Y M PuriExperimental investigation of surface roughness in electrical discharge turning of Ti-6Al-4V alloyTransactions of FAMENA40 (4)10-JanSCIENo
107Milind P. Kshirsagar, V. R. KalamkarUser-centric approach for the design and sizing of natural convection biomass cookstoves for lower emissionsEnergy1151202-1215SCIYes
108S.K. Sharma, V. R. KalamkarExperimental and numerical investigation of forced convective heat transfer in solar air heater with thin ribsSolar Energy147277-291SCIEYes
109PV Kane and AB AndhareApplication of psychoacoustics for gear fault diagnosis using artificial neural networkJournal of Low Frequency Noise, Vibration and Active Control35(3)207-220SCIYes
110Yogesh Deshpande, Atul Andhare and Neelesh Kumar SahuEstimation of surface roughness using cutting parameters, force, sound and vibration in turning of Inconel 718Journal of the Brazilian Society of Mechanical Sciences and Engineering39 (12)5087 – 5096SCIEYes
111Abhishek M. Thote, Rashmi V. Uddanwadiker, Krishna Sharma and Sunita ShrivastavaOptimum pure intrusion of a mandibular canine with the segmented arch in lingual orthodonticsBiomedical materials and engineering28247-256SCIEYes
112Abhishek M. Thote, Rashmi V. Uddanwadiker, Krishna Sharma and Sunita ShrivastavaPure intrusion of a mandibular canine with segmented arch in lingual orthodontics: A numerical study with 3-dimensional finite element analysisBiocybernetics and Biomedical Engineering37590-598SCIEYes
113Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Chamoli, S.Analytical approach for evaluation of thermo hydraulic performance of roughened solar air heaterCase Studies in Thermal Engineering819-31ESCIYes
114C. K. Mangrulkar, A. S. Dhoble, A. R. Deshmukh, S. A. MandavganeNumerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflowApplied Thermal Engineering110521-538SCIEYes
115C. K. Mangrulkar, A. S. Dhoble, S. G. Chakrabarty, U. S. WankhedeExperimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plateInternational Journal of Heat and Mass Transfer104964-978SCIYes
116R.M. Dhoble, P. Reddy Maddigapu, Sadhana S. Rayalu,A.G. Bhole,Ashwinkumar S. Dhoble, Shubham R. DhobleRemoval of arsenic(III) from water by magnetic binary oxide particles(MBOP): Experimental studies on fixed bed columnJournal of Hazardous Materials322469-478SCIYes
117C. K. Mangrulkar, V. M. Kriplani, A. S. DhobleExperimental Investigation Of Convective Heat Transfer Enhancement Using Alumina/Water And Copper Oxide/Water NanofluidsThermal Science201681-1692SCIE 
118Abhishek Jha, Shital S. Chiddarwar, Veer Alakshendra, Mayur AndulkarKinematics‑based approach for robot programming via human arm motionJournal of the Brazilian Society of Mechanical Sciences and Engineering39(7)2659-2675SCIEYes
119Veer Alakshendra, Shital S. ChiddarwarAdaptive robust control of Mecanum-wheeled mobile robot with uncertaintiesNonlinear Dynamics87(4)2147-2169SCIYes
120Abhishek Jha, Shital S. ChiddarwarRobot Programming by Demonstration using Teleoperation through ImitationEmerald Journal of Industrial Robot44(2)142-154SCIEYes
121Mangesh S. Kotambkar, Animesh ChatterjeeModeling and investigation of modal properties under crack induced mistuning in a turbine blade packetJournal of Vibration Engineering and Technologies4(4)335-348SCIEYes
122Avinash A Thakre, Shashank SoniModeling of burr size in drilling of aluminum silicon carbide composites using response surface methodologyEngineering Science and Technology, an International Journal191199-1205NoNo
123Avinash A Thakre, Ananta Shinde, Ganesh MundheImprovement in Boundary Lubrication Characteristics of SAE20W40 Oil Using Aluminum Oxide NanoparticlesJournal of Tribology13834501SCIYes
124Vinit Gupta, Arun K. SinghScaling laws of gelatin hydrogels for steady dynamic frictionInternational Journal of Modern Physics B301650198SCIYes
125Sandeep Nandgaonkar, T V K Gupta, Suhas S JoshiEffect of Water Oil Mist Spray (WOMS) Cooling on Drilling of Ti6Al4V Alloy Using Ester Oil Based Cutting FluidProcedia Manufacturing671-79NoYes
126Nikhil Bauskar, Rahul A Mali, T V K GuptaFEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718Atlantis Press: 2nd International Conference on Communication
and Signal Processing (ICCASP 2016)
137206-211NoYes
127G. V. V Surya Kiran, K. Hari Krishna, Sk. Sameer, M. Bhargavi, B. Santosh Kumar, G. Mohana Rao, Y. Naidubabu, Ravikumar Dumpala, B. Ratna SunilMachining characteristics of fine grained AZ91 Mg alloy processed by friction stir processingTransactions of Nonferrous Metals Society of China27 (4)804–811SCIYes
128Pravin Sawarkar,T.Sundararajan and K.SrinivasanEffects of externally applied pulsations on LPG flames at low and high fuel flow ratesApplied Thermal Engineering1111664-1673SCIYes
129K.M. Pandey, S. Roga and G. ChoubeyNumerical Investigation on Hydrogen-Fueled Scramjet Combustor with Parallel Strut Fuel Injector at a Flight Mach Number of 6Journal of Applied Fluid Mechanics91215-1220SCIYes
130Girish Bhiogade and J.G. SuryawanshiInvestigations on premixed charge compression ignition engine with external mixture formation and exhaust gas recirculation techniqueJournal of Mechanical Science and Technology (Springer)305269 – 5274SCIEYes
131S.P.Chincholkar and J. G. SuryawanshiGasoline Direct Injection: An Efficient TechnologyEnergy Procedia (Elsevier)90666 – 672NoYes
132Animesh ChatterjeeSensitivity and Error Analysis of a Coupled Micro-Resonator Array for Ultra-Sensitive Mass Detection Using Matrix Perturbation TheoryIEEE Sensors Journal  SCIYes
133Animesh ChatterjeeLumped parameter modelling of turbine blade packets for analysis of modal characteristics and identification of damage induced mistuningApplied Mathematical Modelling  SCIYes