Details of Publications 

  • 2020-21
  • 2019-20
  • 2018-19
  • 2017-18
  • 2016-17
  • 2015-16
  • 2013-14
  • 2012-13
  • 2011-12

JOURNAL PUBLICATIONS

  1. A. Behera, P. Dupare, M.M. Thawre, A.R. Ballal, “Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP Multidirectional composite laminates”, International Journal of Fatigue, Vol. 136, pp. 105590-105596, July-2020.
  2. H.K. Yadav, A R. Ballal, M.M. Thawre, V.D. Vijayanand, “Recovery and recrystallization during creep exposure of cold worked Ti-modified 14Cr-15Ni austenitic stainless steel”, Materials At High Temperature, Vol. 37, pp. 221-229, August-2020.
  3. H.K. Yadav, A.R. Ballal, M.M. Thawre, V.D. Vijayanand, “Analysis of transient and tertiary creep behavior of Titanium modified 14Cr-15Ni stainless steel”, Materials Research Express, Vol. 7, pp. 16580-16587, April-2020.
  4. D.D. Awale, V.D. Vijayanad, A.R. Ballal, M.M. Thawre, J.G. Kumar, G.V. Prasad Reddy, “Evaluation of tensile properties of various regions of creep exposed dissimilar weld joint using miniature specimen testing”, Engineering Failure Analysis, Vol. 120, pp. 105079-105085, February-2020.
  5. D.D. Awale, A.R. Ballal, M.M. Thawre, V.D. Vijayanad, J.G. Kumar, G. V. Prasad Reddy, “Microstructural investigation and mechanical properties evaluation using miniature specimen testing of various constituents of dissimilar weld joint”, Journal of Nuclear Materials, Vol. 532, pp. 152048-152054, April-2020.
  6. D.D. Awale, A.R. Ballal, M.M. Thawre, “Dissimilar weld joints of P91 and 316LN for power plants applications- A review”, Materials Today: Proceedings; Vol. 28, pp. 2505-2510, May-2020.
  7. D.D. Awale, M.M. Thawre, “Effect of induced external damage on carbon fiber reinforced (CFC) composite”; Materials Today: Proceedings: Vol. 27, pp. 2127-2131, September-2020.
  8. A. Behera, M.M. Thawre, A.R. Ballal, P. Babrekar, P. Vaidya, S. Vijetha, T. Sawant “Effect of Moisture Content and Fiber Orientation on the Mechanical Behavior of GFRP Composites”, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, pp. 433-439, June-2020.
  9. L. Maddi, R. Shivhare, V. Kumar, M. Goel, M. Ramesh, A. Ballal, “Effect of tempering time on the microstructure and stress rupture properties of P92 steel”, Materials Today: Proceedings, Vol. 44, pp. 34-38, July-2020.
  10. L. Maddi, A.R. Ballal, D.R. Peshwe, M.D. Mathew, “Influence of normalizing and tempering on creep properties of P92 steel”, High Temperature Materials and Processes, Vol. 39, pp.178–188, June-2020.
  11. A. Khond, S. Adil, K. Guruvidyathri, B.S. Murty, B. Majumdar, J. Bhatt, A.K. Srivastav, “Kinetics and phase formation during crystallization of Hf64Cu18Ni18 amorphous alloy”, Phase Transitions, Vol. 94, pp. 110-121, March – 2021.
  12. S. Bandi, A.K. Srivastav, “Unveiling the crystallographic origin of mechanochemically induced monoclinic to triclinic phase transformation in WO3”, Cryst. Eng. Comm. , Vol. 23, pp. 1821-1827, February – 2021.
  13. S. Bandi, A. K. Srivastav, “Understanding the growth mechanism of hematite nanoparticles: The role of maghemite as an intermediate phase”, Crystal Growth & Design, Vol. 21, pp. 16-22, January-2021.
  14. S. Bandi, N N. Suresh, T. Bhoyar, A.K. Srivastav, “WO3.1/3H2O nanorods/nanoplates: Growth mechanism and CO2 uptake”, Materialia, Vol. 14, pp. 100943-100955, December – 2020.
  15. V.B. Rajkumar, Y. Du, S. Liu, K. Cheng, A.K. Srivastav, “Measurements of the melting points, liquidus, and solidus of the Mo, Ta, and Mo-Ta binary alloys using a novel high-speed pyrometric technique”, International Journal of Refractory Metals and Hard Materials, Vol. 93, pp. 105335-105341, December – 2020.
  16. S. Bandi, A.K. Srivastav, “Graphene-based chemiresistive gas sensors”, Comprehensive Analytical Chemistry, Vol. 91, pp. 149-173, November – 2020.
  17. A.K. Srivastav, S. Bandi, A. Kumar, B.S. Murty, “Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy”, Philosophical Magazine Letters, Vol. 100, pp. 442-451, July – 2020.
  18. S. Bandi, D. Vidyasagar, S. Adil, M.K. Singh, J. Basu, A.K. Srivastav, “Crystallite size induced bandgap tuning in WO3 derived from nanocrystalline tungsten”, ScriptaMaterialia, Vol.176, pp. 47-52, February – 2020.
  19. A. Bajpai, J. Bhatt, K. Biswas, N.P. Gurao “A new perspective to thermodynamical designing of high entropy bulk metallic glasses (HE-BMGs)” Physica B: Condensed Matter, Vol. 595,  pp. 1-12, October-2020.
  20. K.S.N. Satish Idury, P. Rastogi, R.L. Narayan, N. Singh, K.R. Ravi, B.S. Murty, J. Bhatt, “Room temperature dynamic indentation response of partially crystallized Zr–Cu metallic glass” Journal of Alloys and Compounds, Vol. 834, pp.1-5, September- 2020.
  21. P. Burad, G. Chaitanya, N. Thawari, J. Bhatt, T.V.K Gupta, “Characterization of Additive Manufactured Inconel 718 Alloy Using Laser Cladding”, Key Engineering Materials, Vol. 882, pp. 3-10, Feburary-2021.
  22. A. Deshmukh , A. Khond, J.Bhatt, U.A. Palikundwar, “Understanding the role of Er on glass-forming ability parameters and critical cooling rate in Fe‒based multicomponent bulk metallic glasses” Journal of Alloys and Compounds, Vol. 819, pp.1-8, April -2020.
  23. S. Mehar, S.G. Sapate, N. Vashishtha, P. Bagde, “Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating”, Ceramics International, Vol. 46, pp. 11799-11810, June-2020
  24. S. Mehar, S.G. Sapate, N. Vashishtha, P. Bagde, “Role of friction Energy and Tribo Reduction in Abrasive wear of Alumina Titania Coatings”, Surface Review and Letters, Vol. 27, pp. 2050022, June-2020.
  25. S. Mehar , S.G. Sapate , N. Vashishtha, A. Rathod, P. Bagde, “Friction energy map for sliding wear of Al2O3-TiO2 and Cr2O3-TiO2coatings, Surface Topography”, Metrology and Properties, Vol. 9, pp. 15020-15026, February-2021.
  26. S. Mehar , S.G. Sapate , N. Vashishtha, A. Rathod, P. Bagde, “Investigation on structural, mechanical and tribological properties of plasma sprayed Al2O3-40%TiO2 coating”, Materials Today: Proceedings Vol. 38,pp. 2525–2531, August-2020.
  27. S. Mehar, S.G. Sapate, Nitesh Vashishtha, Avishkar Rathod, Pranay Bagde, “Tribological performance of plasma sprayed Al2O3-TiO2-ZrO2 ceramic coating”, Materials Today: Proceedings, Vol. 38, pp. 2525-2531, Februry-2021.
  28. T.R. Dandekar, A. Gupta, R.K. Khatirkar, R. Kumar, A.D. Gaikwad, “Evolution of microstructure and texture in UNS S32750 super duplex stainless steel weldments”, Transactions of the Indian Institute of Metals, Vol. 41 pp. 1023-1032, March-2021.
  29. T.R. Dandekar, A. Kumar, R.K. Khatirkar, D. Mahadule, G. Ayyappan, “Multi-step cross rolling of UNS S32101 steel – Microstructure, texture and magnetic properties”, Journal of Materials Engineering and Performance, Vol. 30, pp. 2916–2929, Februry-2021.
  30. D. Mahadule, R.K.  Khatirkar, A. Gupta, R. Kumar, “Effect of heating temperature and cooling rate on the microstructure and mechanical properties of a Mo rich two phase α+β titanium alloy”, Journal of Materials Research, Vol. 36 pp. 751–763, Janury-2021.
  31. R. Kumar, A. Gupta, T.R. Dandekar, R.K. Khatirkar, “Evolution of microstructure and texture during homogenization in a strip cast AA8011 aluminium alloy”, Intermetallic, Vol. 130, pp. 107064-107071, March-2021.
  32. A. Gupta, R.K. Khatirkar, A. Kumar, K. Thool, N. Bhibhanshu, S. Suwas, “Texture development during cold rolling of a beta titanium alloy: Experiments and simulations”, Metallurgical and Materials Transactions A, Vol. 52, pp. 1031–1043, January-2021.
  33. A. Gupta, R.K. Khatirkar, T. Dandekar, D. Mahadule, “Texture development during multi-step cross rolling of a beta titanium alloy: Experiments and simulations”, Journal of Alloys and Compounds, Vol. 850, pp. 156824-156830, January-2021.
  34. B.H. Vadavadagi, H.V Bhujle, R.K. Khatirkar, “Forming limit diagrams of low carbon steels using digital image correlation technique and enhanced formability predictions incorporating microstructural developments”, Journal of Materials Engineering and Performance, Vol. 29, pp. 6066-6077, August-2020.
  35. P. Kori, B.H. Vadavadagi, R.K. Khatirkar, “Hot deformation characteristics of ASS-304 austenitic stainless steel by tensile tests”, Materials Today: Proceedings, Vol. 28, pp. 1895-1898, June-2020.
  36. A. Kumar, S. Londhe, T. Dandekar, R.K Khatirkar, “Effect of cooling rate on the precipitation behaviour of Fe-Cr-Ni alloy”, Transactions of Indian Institute of Metals, Vol. 73, pp. 1961-1973, June-2020.
  37. N. Deeparekha, A. Gupta, M. Demiral, R.K. Khatirkar, “Cold rolling of interstitial free (IF) steel – Experiments and simulations”,  Mechanics of Materials, Vol. 148, pp. 103420-103428, September-2020.
  38. R. Kumar, A. Gupta, T. Dandekar, R.K. Khatirkar, “Microstructure and texture development in AA3003 aluminium alloy”, Materials Today Communications, Vol. 24, pp. 1-10, September-2020.
  39. V. Tandon, M.A. Thombre, A.P. Patil, R.V. Taiwade, H. Vashishtha. “Effect of Heat Input on the Microstructural, Mechanical, and Corrosion Properties of Dissimilar Weldment of Conventional Austenitic Stainless Steel and Low-Nickel Stainless Steel“, Metallography, Microstructure, and Analysis, 9(5), 668-677, Year 2020

CONFERENCE PUBLICATIONS

  1. S. Bandi, A. K. Srivastav, “Waste dry cell battery electrodes derived graphene and its application”, International Virtual Conference on Advances in Functional Materials (AFM 2020), Bhubaneswar, August-2020. (Oral)
  2. U. Pathak, R.V. Taiwade, S. Balbande, “Weldability of bimetallic butt joint between hastelloy C-276 and advance austenitic stainless steel“, Materials Today: Proceedings, 28, 2547–2550, Year 2020

JOURNAL PUBLICATIONS

  1. Hari Krishan Yadav, Atul Ballal, Manjusha M. Thawre, David Vijayanand, “Recovery and recrystallisation during creep exposure of cold worked Ti-modified 14Cr–15Ni austenitic stainless steel“, Materials at High Temperatures, In Press, April 2020
  2. Deepshree D. Awale, Atul R. Ballal, M. M. Thawre, “Dissimilar Weld Jointsof P91 and 316LN for Power Plants Applications-A Review“, Materials Today: Proceeding; In press, May 2020
  3. Alok Behera, Prasanna Dupare, Manjusha M. Thawre, Atul Ballal, “Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP multidirectional composite laminates“, International Journal of Fatigue ,136, 105590, March 2020
  4. Deepshree D. Awale, Atul R. Ballal, Manjusha M. Thawre, V.D. Vijayanand,J. Ganesh Kumar, G.V. Prasad Reddy, “Microstructural investigation and mechanical properties evaluation using miniature specimen testing of various constituents of dissimilar weld joint“, Journal of Nuclear Materials, 532, 152048, Feb.2020.
  5. Alok Behera, Ashok Vishwakarma, M.M. Thawre, Atul Ballal, “Effect of hygrothermal aging on static behavior of quasi-isotropic CFRP composite laminate“, Composites Communications, 17, pp. 51-55 ,Feb. 2020.
  6. Hari Krishan Yadav, Atul Ballal, Manjusha M. Thawre, David Vijayanand, “Analysis of transient and tertiary creep behavior of Titanium modified 15Ni-14Cr stainless steel after cold working” Materials Research Express, 7 (1), pp. 16580,Jan. 2020
  7. Alok Behera , M. M. Thawre and A R Ballal, “Failure Analysis of CFRP Multidirectional Laminates Using the Probabilistic Weibull Distribution Model under Static Loading“, Fibers and Polymers 20(11), pp. 2390-2399, Nov. 2019
  8. Ashok Vishwakarma , Alok Behera , M. M. Thawre and A R Ballal, “Effect of thickness variation on static behaviour of carbon fiber reinforced polymer multidirectional laminated composite“, Materials Research Express, 6, 115312, Sept. 2019
  9. Alok Behera, Prasanna Dupare, Manjusha M. Thawre, Atul R. Ballal, “Effect of fatigue loading on stiffness degradation, energy dissipation, and matrix cracking damage of CFRP [±45]3S composite laminate“, Fatigue and Fracture of Engineering Materials and Structures, 42 (4), pp. 2302-2314, Oct. 2019
  10. Hari Krishan Yadav, A.R.Ballal, M.M.Thawre, V.D.Vijayanand, “Assessment of microstructural evolution in cold-worked Ti-modified 14Cr–15Ni austenitic stainless steel on creep exposure“, Materials Research Express, Volume 6, Number 9, July 2019
  11. Hari Krishan Yadav, A.R.Ballal, M.M.Thawre, V.D.Vijayanand, “Creep studies of Cold Worked Austenitic Stainless Steel“, Procedia Structural Integrity, Volume 14, pp. 605-611, Jan. 2019
  12. Ashish Vaidya, Atul Ballal, Hari Krishan Yadav, Dilip Peshwe, “Stress Rupture Studies of V-notched Grade 92 Steel for High Temperature Applications“, Procedia Structural Integrity, Volume 14, pp. 410-415, Jan. 2019
  13. Sachin Balbande, R.V. Taiwade , A.P. Patil and Ujjawal Pathak, “Cold metal transfer welding of duplex with ferritic and super austenitic stainless steel”, Materials Research Express, 6 (106542), 2019.
  14. Sumitra Sharma, R.V. Taiwade, Abhishek Yadav and Himanshu Vashishtha, “Influence of fillers and welding processes on the microstructuralevolution, mechanical properties and corrosion behavior of dissimilar Hastelloy C-22/AISI 321 joints”, Materials Research Express, 6 (096594), 2019.
  15. J. Verma, R.V. Taiwade, R. Katariya, KanishkaJha, Vipin Tandon, “Evolution of Metallurgical Phases and Its Co‑relation with Mechanical Properties and Corrosion Resistance of 22Cr–5Ni–3Mo and 16Cr–10Ni–2Mo Dissimilar Weldments”, Metallography, Microstructure, and Analysis, Volume 8, pp 506-516, 2019.
  16. Waghmare, U., Dhoble, A.S., Taiwade, R., Verma, J., Vashishtha, H., “Prediction of heat affected zone and other mechanical properties of welded joints of HSLA A588-B of jet blast deflector”, World Journal of Engineering, Volume 16/4, pp-438-444, 2019.
  17. Sanket Mehar, S.G. Sapate, Nitesh Vashishtha, Pranay Bagde, “Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating“, Ceramic International, 46, (8B),11799-11810, 2020
  18. Ayush Kumar Goyal, S G Sapate, S Mehar ,NVashishtha , P Bagde and A Rathod, “Tribological properties of HVOF sprayed WC-Cr3C2-Ni coating“, Mater. Res. Express 6, 106415,2019
  19. Nitesh Vashishthaa, Sanjay Sapate, “Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings“, Materials Research. 22(1), 2019
  20. Yogesh Prabhu, S. Vincent, Jatin Bhatt,“Thermodynamic modelling to optimize glass forming composition in multicomponent Zr-Cu-Co-Al system” Materials Today March- 2020 (https://doi.org/10.1016/j.matpr.2020.02.169)
  21. Adithya Nair, Yogesh Prabhu, Jasmitha Mendonca, W.H. Ryu, E.S. Park, Jatin Bhatt, S.Vincent “An experimental case study on corrosion characterization of Cu46Zr40Ti8.5Al5.5 metallic glass” Journal of Non-Crystalline Solids, Vol. 524, pp.119654-119659, November- 2019
  22. Ashwini Kumar, S. J. Dhoble, Jatin Bhatt, J. J. Terblans, H. C. Swart, “Structural characterization and influence of calcination temperature on luminescence properties of Sr0.91Mg2Al5.82Si9.18O30: Eu3+ nanophosphors“, Powder Technology Vol. 354 pp. 591-600, September- 2019
  23. Prashant Parhad, Vinayak Dakre, Ajay Likhite, Jatin Bhatt, “The impact of cutting speed and depth of cut on cutting force during turning of austempered ductile iron“, Materials Today: Proceedings Vol. 19, pp. 663-669, August -2019

CONFERENCE PUBLICATIONS

  1. Ujjawal Pathak, Ravindra V. Taiwade and Sachin Balbande, “Weldability of Bimetallic Butt Joint between Hastelloy C-276 and Advance Austenitic Stainless Steel” 2nd International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN2020), February 28-29, 2020

JOURNAL PUBLICATIONS

  1. Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “ TEM Analysis of Austempered Ductile Iron Processed Through Conventional and Two Step Austempering Process“, Trans. Indian Inst. Met, 72(4) 911-917, 2019
  2. Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “Effect of Austenitization Temperature on Microstructure and Mechanical properties of Low Carbon equivalent carbidic austempered ductile iron”, International Journal of Minerals, Metallurgy and Materials, Vol 25, Number 7, 770-778, July 2018
  3. AnujKhond, D. Arvindha Babu, Sai Smaran, Akash Deshmukh, Bhaskar Majumdar , Jatin Bhatt ,Ajeet K.Srivastav “Thermodynamic calculation and experimental validation of Hf-rich glass forming compositions in Hf-Cu-Ni system”, Vol . 500 pp 191-195, November- 2018
  4. Sudhanshu Kuthe, Akash Deshmukh, Umesh A Palikundwar, Jatin Bhatt “Computational Platform for Manufacturing Bulk Metallic Glasses Based on GFA Parameters” Trans. Indian Institute of Metals. (DOI 10.1007/s12666-018-1416-7)
  5. Patil Aniruddha S., Hiwarkar Vijay D., Verma Pankaj K., Khatirkar Rajesh K. (2019), “Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DLMS)”, Journal of Alloys and Compounds, 777, 165-173 (https://doi.org/10.1016/j.jallcom.2018.10.308) (SCI)
  6. Dandekar Tushar R., Gupta Aman, Khatirkar Rajesh K., Vadavadagi Basavaraj (2018), “Shielded metal arc welding of UNS S32750 steel: Microstructure, mechanical properties and corrosion behaviour“,  Materials Research Express, 5, 106506 (https://doi.org/10.1088/2053-1591/aad99a) (SCIe)
  7. Kumar Amit, Gupta Aman, Kumar Amit, Khatirkar Rajesh K., Bibhanshu Nitish, Suwas Satyam (2018), “Strain rate sensitivity behaviour of a chrome-nickelaustenitic-ferritic stainless steel and its constitutive modelling“, ISIJ International, 58(10), 1840-1849 (https://doi.org/10.2355/isijinternational.ISIJINT-2018-051) (SCI)
  8. Kumar Amit, Khatirkar Rajesh K., Gupta Aman, Shekhawat Satish, Suwas Satyam (2018), “Deciphering the possible role of strain path on the evolution of microstructure, texture and magnetic properties in a Fe-Cr-Ni alloy“, Metallurgical and Materials Transactions A, 49(8), 3402-3418 (https://doi.org/10.1007/s11661-018-4714-0) (SCI)
  9. Kumar Amit, Gupta Aman, Khatirkar Rajesh Kisni, Suwas Satyam (2018),”Texture development during cross rolling of a dual phase Fe-Cr-Ni alloy: experiments and simulations“, Philosophical Magazine Letters, 98 (1), 17- 26 (https://doi.org/10.1080/09500839.2018.1446561) (SCI)
  10. Gupta Aman, Khatirkar Rajesh, Kisni, Kumar Amit, Parihar Manendra S. (2018),”Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in alpha+beta titanium alloy“, Journal of Materials Research [Cambridge Core], 33(8), 946-957 (https://doi.org/10.1557/jmr.2018.54) (SCI)
  11. Gupta Aman, Kumar Amit, Baskaran T., Arya S.B., Khatirkar Rajesh K. (2018), “Effect of heat input on microstructure and corrosion behaviour of duplex stainless steel shielded metal arc welds“, Transactions of the Indian Institute of Metals, 71(7), 1595-1606 (https://doi.org/10.1007/s12666-018-1294-z) (SCIe)
  12. Kumar Ranjeet, Gupta Aman, Kumar Amit, Chouhan R.N., Khatirkar Rajesh K. (2018),”Microstructure and texture development during deformation and recrystallization in strip cast AA8011 aluminium alloy“, Journal of Alloys and Compounds, 742, 369-382 (https://doi.org/10.1016/j.jallcom.2018.01.280) (SCI)
  13. Verma Jagesvar, Taiwade Ravindra V. , Reddy Chandraprakesh, Khatirkar Rajesh K. (2018),”Effect of friction stir welding process parameters on Mg-AZ31B/Al-6061 joints“,  Materials and Manufacturing Processes, 33(3), 308- 314(http://dx.doi.org/10.1080/10426914.2017.1291957) (SCIe)
  14. Bagde P., Sapate S.G., Khatirkar R.K., Vashishtha N. (2018), “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings“,Tribology International, 121 (4), 353-372 (http://dx.doi.org/10.1016/j.triboint.2018.01.067) (SCI)
  15. Kumar Nilesh, Kumar Amit, Gupta Aman, Gaikwad Ashvin D., Khatirkar Rajesh K. (2018),”Gas tungsten arc welding of 316L austenitic stainless steel with UNS S32205 duplex stainless steel“,  Transactions of the Indian Institute of Metals, 71(2), 361- 372 (http://dx.doi.org/10.1007/s12666-017-1167-x) (SCIe)
  16. Bagde P., Sapate S., Khatirkar R., Vashishtha N., Tailor S. (2018), “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating“, Materials Research Express, 5(2), (http://doi.org/10.1088/2053-1591/aaacf4) (SCIe)
  17. Seema S. Munjewar, Shashikant B. Thombre, Awanikumar P. Patil, “Passive direct alcohol fuel cell using methanol and 2-propanol mixture as fuel“, Ionics, https://doi.org/10.1007/s11581-018-2627-y
  18. Ankur V. Bansod, Awanikumar P. Patil, Sourabh Shukla, (2018) “Effect of heat on microstructural, mechanical and electrochemical evaluation of tungsten inert gas welding of low-nickel ASS“, Anti-Corrosion Methods and Materials, https://doi.org/10.1108/ACMM-05-2018-1941
  19. Vipin Tandon, Awanikumar Patil, Ramesh C Rathod, “Correlation of martensite content and dislocation density of cold worked 316L on defect densities of passivating film in acidic environment“, Materials Research Express 5 (2018) 086515, https://doi.org/10.1088/2053-1591/aacee9
  20. Nilay N. Khobragade, Ankur V. Bansod and Awanikumar P. Patil, “Effect of Dissolved Oxygen on the Corrosion Behavior of 304 SS in 0.1N Nitric Acid Containing Chloride” 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aab8de
  21. Nilay N. Khobragade , Ankur V. Bansod, Karansagar V. Giradkar, Awanikumar P. Patil, KetanJagtap, Raju Pawde and Abhijeet P. Moon, “Effect of Concentration and Surface Roughness on Corrosion Behavior of Co-Cr-Mo Alloy in Hyaluronic Acid“, 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aaa5f2
  22. Vipin Tandon, Awanikumar Patil, Ramesh C Rathod, SourabhShukla, “Influence of cold work on electrochemical behavior of 316L ASS in PEMFC environment“, Mater. Res. Express 5 (2018) 026528 https://doi.org/10.1088/2053-1591/aaaf27
  23. Kumar A., Chopkar M.K., Verma J., Taiwade R.V., Tondon V., Shukla S, “Effect of filler and autogenous TIG welding on microstructure, mechanical properties and corrosion resistance of nitronic 50 stainless steel” Materials Research Express Volume 6, Issue 2, February 2019, Article number 026557.
  24. Sharma S., Taiwade R.V., Vashishtha S., and Mukherjee S., “Microstructural characterization, mechanical properties and corrosion behaviour of pulsed current GTA welded bimetallic joints between superalloy C-276 and stabilized austenitic stainless steel grade 321” Materials Research Express Volume 6, Issue 1, January 2019, Article number 016532
  25. Sharma S., Taiwade R.V., Vashishtha S., “Influence of filler material composition on the microstructural evolution, mechanical properties and corrosion behaviour of nickelbased super alloy C-276” Materials Research Express Volume 6, Issue 4, 2019, Article number 046505
  26. Jagesvar Verma, Ravindra V. Taiwade, Ravinder Kataria, Anil Kumar, “Welding and electrochemical behavior of ferritic AISI 430 and austeno-ferritic UNS 32205 dissimilar welds“, Journal of Manufacturing Processes, Volume 34 Part A, pp 292-302 (2018)
  27. Pant, Pallavi; Verma, Jagesvar; Taiwade Ravindra and Phani Prabhakar, K. “Influence of advanced laser-arc hybrid welding and conventional MIG process on microstructure, mechanical properties and corrosion resistance of dissimilar joints,” Materials Research Express, Volume 5, No-6 (2018)
  28. Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, Sudeepta Mukherjee and Shruti Tiwari, “Consumable Selection for Pulsed Current Gas Tungsten Arc Welded Bimetallic Joints between Super C-276 alloy and Ti -Stabilized Grade 321“, Journal of Manufacturing processes, 32 (2018) 32-47.
  29. N Vashishtha, S Sapate, “Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings” Materials Research, 2019, l 22 ( 1). DOI: 10.1590/1980-5373-mr-2018-0475
  30. Vashishtha N, Sapate S.G. Gahlot J Bagde P, “Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating“, Tribology Letters, 66, 2, 2018, 56-66
  31. Bagde P Sapate S.G. Khatirkar R Vashishtha N, “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni Graphite coatings“, Tribology International, 121 (2018), 353-372
  32. Nitesh Vashishtha, S.G. Sapate, B. J. Sahariah, Pranay Bagde, “Microstructural characterization and wear behaviour of High Velocity Oxy Fuel sprayed Cr 3 C 2 -25NiCr coating”,Materials Today: Proceedings, 2018, 5(9),17686-17693
  33. Pranay Bagde, S. G. Sapate, R. K. Khatirkar, Nitesh Vashishtha, Satish Tailor “Friction and Abrasive Wear Behaviour of Cr2O3 -TiO2 coating”, Materials Research Express. 5 (2018), 026410
  34. Bagde P, Sapate S.G., Khatirkar R, Vashishtha N Tailor S, “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2coating“, Materials Research Express, vol. 5,(2),2018, 026410
  35. Nitesh Vashishtha, S.G. Sapate , Pranay Bagde , A.B. Rathod, “Effect of heat treatment on friction and abrasive wear behaviour of WC-12Co and Cr3C2-25NiCr coatings“, Tribology International 118 (2018) 381–399
  36. Yogesh Y. Mahajan, R. K. Paretkar, D. R. Peshwe, “Optimization of Retrogression Parameters of AA7010 Alloy” Transaction of the Indian Institute of Metals, (2018) 71(7):4687-1697
  37. Yogesh Mahajan, D. R. Peshwe, “Effect of Temper Conditions on Abrasive wear behaviour of AA7010 Alloy” Transaction of the Indian Institute of Metals, (2018) 71(4):1025-1032
  38. Alok Behera , Manjusha M. Thawre , Atul Ballal ,”Effect of matrix crack generation on fatigue life of CFRP multidirectional laminates”, Materials Today Proceedings, Vol. 5,pp. 20078-20084,2018
  39. Alok Behera , Janaki Dehuri, M. M. Thawre, ”A comparative study on laminated and randomly oriented Luffa –Kevlar reinforced hybrid composites”, Journal of Natural Fibers, Vol. 16 No 2 , pp. 237-244,2019.

CONFERENCE PUBLICATIONS

  1. Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “Characterization of Austempered Ferritic Ductile Iron”, IMMT 2017, IOP Conference Series; Material Science and Engineering, Dubai, UAE. 346, 2018
  2. Ankush S Marodkar, Ravindra V Taiwade, Himanshu Vashishtha, “Corrosion Behavior of Ni- based Coatings Deposited by Thermal Spray on Low Nickel Cr-Mn Stainless Steel”, , 5th International CORSYM, Chennai, India, 23-24 March 2018, pp23-24
  3. Prateek Shendre, Ravindra Taiwade, Jagesvar Verma, “Welding and Corrosion Study of Ferritic Stainless Steel Weld Joint”, 5th International CORSYM, Chennai, India, 23-24 March 2018, pp 165-166

JOURNAL PUBLICATIONS

  1. Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, Sudeepta Mukherjee and Shruti Tiwari, “Consumable Selection for Pulsed Current Gas Tungsten Arc Welded Bimetallic Joints between Super C-276 alloy and Ti -Stabilized Grade 321“, Journal of Manufacturing processes, 32 (2018) 32-47.
  2. Jagesvar Verma, Ravindra V. Taiwade, S.G. Sapate, A.P. Patil and A.S. Dhoble, “Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir Welded Aluminum and Magnesium Dissimilar Alloys“, Journal of Materials Engineering and Performance, Volume 26, Issue 10, pp 4738–4747, (October 2017)
  3. Jagesvar Verma, Ravindra V. Taiwade, Reshma Sonkusare, “Effects of austenitic and duplex electrodes on microstructure, mechanical properties, pitting and galvanic corrosion resistance of ferritic and dual-phase stainless steel dissimilar joints“, Journal of Materials Research (Cambridge Core) Volume 32, Issue 16 , pp. 3066-3077, (28 August 2017)
  4. Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, “Investigation on the Multi-pass Gas Tungsten Arc Welded Bi-metallic Combination between Nickel-based Superalloy and Ti-stabilized Austenitic Stainless Steel“, Journal of Materials Research (Cambridge Core Volume 32, Issue 16, pp. 3055-3065, (28 August 2017)
  5. Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha,”Effect of Pulsed Current Gas Tungsten Arc Process on the Dissimilar Weldments between Nickel-based Superalloy/Austenitic Stainless Steel“, Iron and Steel Institute of Japan, Vol. 57 No. 6, pp. 1080-1086, (2017)
  6. Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, “Effect of acetic acid on corrosion behavior of 201, 304 and 430 Stainless Steels“, International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde) Volume 108, Issue 5, pp 406-415 (May 2017)
  7. Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, “Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments between Hastelloy C-276/AISI 321 Austenitic Stainless Steel“, Journal of Materials Engineering and Performance, Volume 26, Issue 3, pp 1146–1157.
  8. Jagesvar Verma, Ravindra V. Taiwade, C. Reddy and R.K.Khatirkar,”Effect of Friction Stir Welding Process Parameters on Mg-AZ31B/Al-6061Joints“, Materials & Manufacturing Processes, Taylor and Francis.
  9. Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, “Effect of Electrodes and Post Weld Solution Annealing Treatment on Microstructures, Mechanical properties and Corrosion Resistance of Dissimilar High Nitrogen” Austenitic and Conventional Austenitic Stainless Steel Weldments, Materials Transaction 58(2), 2017
  10. Jagesvar Verma and Ravindra V. Taiwade “Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments – A Review“, Journal of Manufacturing processes, 25 pp. 134-152 (2017)
  11. Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, Awanikumar P. Patil, “Effect of welding processes on microstructural and mechanical properties of dissimilar weldments between conventional austenitic and high nitrogen austenitic stainless steels“, Journal of Manufacturing Processes 25 (2017) 49–59
  12. K. Akkiraju, S. Kashyap, Ajeet K. Srivastav, N. Chawake, Lukas Bichler and B.S. Murty, “Novel coalescence-driven grain-growth mechanism duringannealing/spark plasma”, Journal of the European Ceramic Society, 37, 4973-4977, December/2017.
  13. Nilay N. Khobragade, Ankur V. Bansod and Awanikumar P. Patil, “Effect of Dissolved Oxygen on the Corrosion Behavior of 304 SS in 0.1N Nitric Acid Containing Chloride” 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aab8de
  14. Nilay N. Khobragade, Ankur V. Bansod, Karansagar V. Giradkar, Awanikumar P. Patil, Ketan Jagtap, Raju Pawde and Abhijeet P. Moon, “Effect of Concentration and Surface Roughness on Corrosion Behavior of Co-Cr-Mo Alloy in Hyaluronic Acid“, 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aaa5f2
  15. Vipin Tondon, Awanikumar Patil, Ramesh C Rathod, Sourabh Shukla, “Influence of cold work on electrochemical behavior of 316L ASS in PEMFC environment“, Mater. Res. Express 5 (2018) 026528 https://doi.org/10.1088/2053-1591/aaaf27
  16. Vipin Tandon, Awanikumar Patil and ankur Bansod, “Effect of Zn addition on corrosion resistance of Cu-Ni alloy in clean and sulphide contaminated seawater“, Canadain Metallurgical Quarterly, 2017 (hhtps://doi.org/10.1080/00084433.2017.1403073
  17. Ankur V Bansod and Awanikumar P Patil, “Effect of Welding Processes on Microstructure, Mechanical Properties and Corrosion Behaviour of Low-Nickel Austenitic Steels“, Metallography, Microstructure and Analysis, DOI 10.1007/s13632-017-0368-3, July 2017 (Springer)
  18. Vipin Tandon, Ankur Bansod, and Awanikumar Patil, “Effect of small amount of Zinc addition on corrosion resistance of Cu-10Ni alloy in clan and sulphide contaiminated seawater“, Copper Topics, Vol 42 (2), June 2017, pp 21-26
  19. Dipika R. Barbadikar, T. Sakthivel, A. R. Ballal, D. R. Peshwe, P. Syamala Rao & M. D. Mathew, “An assessment of mechanical properties of P92 steel weld joint and simulated heat affected zones by ball indentation technique”, Materials at High Temperatures, Published online: 11 Sep 2017
  20. Ch Jagadeeswara Rao, TP Ismail, A Ravi Shankar, Atul Ramesh Ballal, C Mallika, U Kamachi Mudali, “Corrosion Behaviour of Uncoated and Ceramic Coated 9Cr–1Mo Steel in Molten LiCl–KCl–UCl3 Salt”, Transactions of the Indian Institute of Metals, Volume 70 , Issue 5, pp. 1359-1367, July 2017.
  21. Hari Krishan Yadav, Lakshmiprasad Maddi, A. R. Ballal, D. R. Peshwe, Venkateswara Rao “Structural and Mechanical Characterization of Service Exposed 4 2.25Cr–1Mo Steel“, Transactions of the Indian Institute of Metals, Volume 70 , Issue 4, pp. 1091-1096, May 2017.
  22. Swamini Chopra; Saisha Batthula; Kavita Deshmukh; Dilip Peshwe, “Tribological Behaviour of Multi-Walled Carbon Nanotubes (MWCNT) Filled Polybutylene Terephthalate (PBT) Nanocomposites”, Transactions of Indian Institute of Metals, 70(3):801-807, 2017.
  23. Swamini Chopra; Kavita A. Deshmukh; Dilip Peshwe, “Theoretical prediction of interfacial properties of PBT/CNT nanocomposites and its experimental evaluation”, Mechanics of Materials, 109: pp11–17, 2017.
  24. Kavita A Deshmukh, G. R. Pode, S. R. Roy, B. K. Gupte, Swamini Chopra, A.D.Deshmukh, D.R.Peshwe, “Effect of Cryo-ageing at liquid nitrogen temperature and subsequent thermal annealing on interface of Talc filled Polypropylene with different particle size” Trans Indian Inst Met, 71(2)(2018), pp 403-410
  25. Kavita Deshmukh, Maithili Bhakare, Samyukta Shrivastav, Vaishnavi Naik, Swamini Chopra, C.L. Gogte, D.R. Peshwe, “Synthesis and Characterization of Self Healing Thermoplastic Polyurethane (TPU) Thin Films Reinforced with Multi-wall Carbon Nanotubes (MWCNTs)” Mantech Publications, Journal of Nano Technology and Its Application in Engineering Volume 2 Issue 1&2, pp 1-13, (2017)
  26. Sonal P. Ghawade, Kavita A. Deshmukh, D. R. Peshwe, S. J. Dhoble, Abhay D. Deshmukh, “Efficient Red Downshifting in Layered Structure: A Broad Spectral Converter for Enhancing Photo-response of Solar Cell”, J Inorg Organomet Polym, Volume 27, PP- 173-180,(2017)
  27. Swamini Chopra, Kavita A. Deshmukh, Abhay D. Deshmukh, D. R. Peshwe. “Functionalization and Melt-compounding of MWCNTs in PA-6 for Tribological Applications“, IOP Conference Series: Materials Science and Engineering.
  28. Revati Deshpande, Garima Naik, Swamini Chopra, Kavita A. Deshmukh, Abhay D. Deshmukh, D. R. Peshwe, “A study on mechanical properties of PBT nano-composites reinforced with microwave functionalized MWCNTs“, IOP Conference Series: Materials Science and Engineering.
  29. Shreshtha S. Mishra, Nandita V. Ghodki, Swamini Chopra, S. A. Pande, Kavita A. Deshmukh, A. D. Deshmukh, D. R. Peshwe, “Synthesis and Characterization of a Novel Conducting Biopolymer Chitosan Grafted Polyaniline-Polypyrrole Flexible copolymer” International Journal of Science and Research Methodology, Human Journal, 8(1): 104-111, 2017.
  30. Priyanka Khandal, Shweta Gite, Swamini Chopra, S. A. Pande, Kavita A. Deshmukh, A. D. Deshmukh, D.R. Peshwe. “Preparation, Characterization and Variation of Electrical Conductivity with Temperature of Aniline-Pyrrole Copolymer doped with CNT (in-situ and ex-situ)“, VIBGYOR – Bi Annual Multidisciplinary Research Journal.
  31. Swamini Chopra, Kavita A Deshmukh, Abhay Deshmukh, Shilpa Pande, Dilip Peshwe, “Inflorescence type morphology and Mirror-Mist-Hackle pattern in Tensile Fractograph of MWCNT/PBT Nano-composites”, International Journal of Materials Research.
  32. Kavita Deshmukh, A.R. Kangda, S.P. Mahajan, Swamini Chopra, Abhay Deshmukh, D.R. Peshwe, “Influence of Talc Particle Size on Nucleating Efficiency of Commercial Isotactic Polypropylene (iPP)“. Journal of Research in Engineering and Applied Sciences (JREAS) (Accepted)
  33. Sandeep Kuriakose, Promod Kumar Patowari, Jatin Bhatt “Machinability study of Zr-Cu-Ti metallic gass by micro hole drilling using micro-USM” Journal of Materials Processing Technology, Vol. 240, pp.42-51 April 2017.
  34. Alok Behera, Janaki Dehury & M.M. Thawre (2017) “A comparative study on laminated and randomly oriented Luffa-Kevlar Reinforced hybrid composites“, Journal of Natural Fibers, ISSN: 1544-0478 (Online) DOI: 10.1080/15440478.2017.1414653
  35. Gupta Aman, Khatirkar Rajesh Kisni, Kumar Amit, Parihar Manendra S. (2018), “Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in alpha+beta titanium alloy“, Journal of Materials Research [Cambridge Core], (accepted 28 February 2018) (SCI)
  36. Kumar Amit, Gupta Aman, Khatirkar Rajesh Kisni, Suwas Satyam (2018), “Texture development during cross rolling of a dual phase Fe-Cr-Ni alloy: experiments and simulations“, Philosophical Magazine Letters, (accepted 08 February 2018) (SCI)
  37. Gupta Aman, Kumar Amit, Baskaran T., Arya S.B., Khatirkar Rajesh K. (2018), “Effect of heat input on microstructure and corrosion behaviour of duplex stainless steel shielded metal arc welds“,  Transactions of the Indian Institute of Metals (available online) (https://doi.org/10.1007/s12666-018-1294-z) (SCIe)
  38. Kumar Ranjeet, Gupta Aman, Kumar Amit, Chouhan R.N., Khatirkar Rajesh K. (2018), “Microstructure and texture development during deformation and recrystallization in strip cast AA8011 aluminium alloy“, Journal of Alloys and Compounds (available online) (https://doi.org/10.1016/j.jallcom.2018.01.280) (SCI)
  39. Bagde P., Sapate S.G., Khatirkar R.K., Vashishtha N. (2018). “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings“, Tribology International, 121 (4), 353-372 (http://dx.doi.org/10.1016/j.triboint.2018.01.067) (SCI)
  40. Kumar Nilesh, Kumar Amit, Gupta Aman, Gaikwad Ashvin D., Khatirkar Rajesh K. (2018). “Gas tungsten arc welding of 316L austenitic stainless steel with UNS S32205 duplex stainless steel“, Transactions of the Indian Institute of Metals, 71(2), 361-372 (http://dx.doi.org/10.1007/s12666-017-1167-x) (SCIe)
  41. Bagde P., Sapate S., Khatirkar R., Vashishtha N., Tailor S. (2018), “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating” Materials Research Express, 5(2), (http://doi.org/10.1088/2053-1591/aaacf4) (SCIe)
  42. Kumar Amit, Khatirkar Rajesh K., Darshan Chalapathi, Bibhanshu Nitish, Suwas Satyam (2017), “Texture development during cold rolling of Fe-Cr-Ni alloy – Experiments and simulations“, Philosophical Magazine, 97(23), 1939-1962 (http://dx.doi.org/10.1080/14786435.2017.1322727) (SCI)
  43. Kumar Amit, Khatirkar Rajesh K., Darshan Chalapathi, Kumar Gulshan, Suwas Satyam (2017), “Microstructure and texture development during cold rolling in UNS S32205 and UNS S32760 duplex stainless steels“,  Metallurgical and Materials Transactions A, 48, 2349-2362. (http://dx.doi.org/10.1007/s11661-017-4026-9) (SCI)
  44. Vashishtha Nitesh , Khatirkar R.K., Sapate S.G. (2017), “Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coatings“, Tribology International. 105, 55-68. (http://dx.doi.org/10.1016/j.triboint.2016.09.025) (SCI)
  45. Vashishtha N, Sapate S.G. Gahlot J Bagde P, “Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating” Tribology Letters, vol. 66, 2, 2018, 56-66
  46. Nitesh Vashishtha, S.G. Sapate , Pranay Bagde , A.B. Rathod, “Effect of heat treatment on friction and abrasive wear behaviour of WC-12Co and Cr3C2-25NiCr coatings“, Tribology International 118 (2018) 381–399
  47. Nitesh Vashishtha, S .G Sapate, “Abrasive wear maps for High Velocity Oxy Fuel (HVOF) sprayed WC-12Co and Cr3C2−25NiCr coatings“, Tribology International, 114, 2017, 290-3015.
  48. R. Rajeshkumar , V. Udhayabanu , A. Srinivasan , K.R. Ravi “Microstructural evolution in ultrafine grained Al-Graphite composite synthesized via combined use of ultrasonic treatment and friction stir processing” Journal of Alloys and Compounds Vol.726 pp 358-366 2017.
  49. M. Bradha, K. Kavitha, T. Vijayaraghavan, G. Vigila, P. Suresh, V. Udhayabanu, Anuradha Ashok, “Solid state synthesis and analyses of Sr4(Sr2Ta2)O11 complex perovskite with reduced heat treatment steps”, Materials Characterization Vol.128 , pp. 142–147,2017.
  50. K. Kavithaa, T. Vijayaraghavan, N. Gouthami, V.Udhayabanu, Anuradha M. Ashok, “Solid-state synthesis and electrical conductivity properties of Ba3SrTa2O9 complex perovskite”, Materials Characterization,Vol. 133 ,pp.17–24,2017
  51. Yogesh Mahajan, D. R. Peshwe, “Effect of Temper Conditions on Abrasive wear behaviour of AA7010 Alloy“, Transaction of the Indian Institute of Metals, Vol. 71(4), pp. 1025-1032, December – 2017
  52. Yogesh Y. Mahajan, R. K. Paretkar, D.R .Peshwe, “Optimization of Retrogression Parameters of AA7010 Alloy“, Transaction of the Indian Institute of Metals, Published online: 28 March– 2018
  53. V.V.Karambelkar, S.N.Paul, J.D.Ekhe, “Heterogeneous conducting polypyrrole based sensing compound“, RASAYAN J.Chem, Vol 10(3),pp 832-837,Jul- Sep 2017.

CONFERENCE PUBLICATIONS

  1. Ankush S Marodkar, Ravindra V Taiwade and Himanshu Vashishtha, “Corrosion Behavior of Ni-based Coatings Deposited by Thermal Spray on Low Nickel Cr-Mn Stainless Steel“, published paper in Proceedings of the 5th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2018), Chennai (TN) 23-24 March 2018.
  2. Prateek Shendre, Ravindra Taiwade and Jagesvar Verma, “Welding and Corrosion Study of Ferritic Stainless Steel Weld Joint” , published paper in Proceedings of the 5th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2018), Chennai (TN) 23-24 March 2018.
  3. Suresh Bandi, Ajeet K. Srivastav, “In situ rGO/TiO2 nanocomposites for gas sensing applicationss”, CHEMIX’18, Visvesvaraya National Institute of Technology Nagpur; 04/2018 (Best Paper Award)
  4. Suresh Bandi, Vikram Hastak, Sanjay Kashyap, D.R. Peshwe and Ajeet K. Srivastav:, “HRTEM Study of Superparamagnetic Iron Oxide Nanoparticles“, ICONSAT 2018, Indian Institute of Science Bangalore; 03/2018
  5. Vedasri Bai Khavala, Gurudev Tadas, Vabhav Sharma, Suresh Bandi and Ajeet K. Srivastav, “Glass forming ability, thermal stability and indentation characteristic of Hf-Cu-Ni metallic glass” RAMSE 2018, Indian Institute of Technology (ISM) Dhanbad; 03/2018
  6. Suresh Bandi, Vikram Hastak, D.R. Peshwe and Ajeet K. Srivastav, “In-situ TiO2/rGO Nanocomposites for CO Detection“. MRSI symposium on “Advances in Functional and Exotic Materials” (AFEM-2018), Tiruchirapalli; 02/2018
  7. Suresh Bandi, Vikram Hastak, D.R. Peshwe and Ajeet K. Srivastav, “α – Fe2O3 /rGO Nanocomposites for Gas Sensing Applications“. International Conference on Advances in Catalysis for Energy and Environment (CACEE-2018), Tata Institute of Fundamental Research (TIFR), Mumbai; 01/2018
  8. Ajeet K. Srivastav, Devinder Yadav, N.S. Karthiselva, Niraj Chawake and B.S. Murty:, “Microstructure evolution during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy” 24th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2017), San Sebastian, Spain; 06/2017
  9. Hari Krishan Yadav, A.R. Ballal, and M.M Thawre, “Microstructure Evolution during Creep of Cold Worked Austenitic Stainless Steel”, at International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani, Dubai, UAE, November 28-29, 2017
  10. Dipika R. Barbadikar, S. Vincent, A.R. Ballal, D.R. Peshwe, and M.D. Mathew , “Optimization of BI test parameters to investigate mechanical properties of P92 steel”, at International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani, Dubai, UAE, November 28-29, 2017
  11. Alisha Nanwani, Gurpreet Saini, Kavita A. Deshmukh, D.R. Peshwe, S.J. Dhoble and Abhay D. Deshmukh, “Electrochemical Analysis Of Nickel Cobaltite-Magnesium Cobaltite Nanocomposites For Supercapacitor Application” , International Conference On Advanced Rechargeable Batteries & allied Materials – 2017 (ICARBM-2017), P-111, 8-10 March 2017
  12. Sonal P. Ghawade, Kavita A. Deshmukh, Swamini Chopra, D.R. Peshwe, S.J. Dhoble, Abhay D. Deshmukh, “Rapid Synthesis Of Highly Luminescent C-Dots For Improving The Efficiency Of C-Si Solar Cell International Conference On Advanced Rechargeable Batteries & allied Materials”– 2017 (ICARBM-2017), P-62, 8-10 March 2017
  13. Ramendra Kumar Gupta, Jayakrishnan Nampoothir, S. Dhamodharan, K.R.Ravi and V. Udhayabanu, “Ultrasonic assisted Synthesis of Al-4.4Cu/Grp Composite and its Characterisation” NMD-ATM-2017,2017-bits Goa.
  14. Aman Parashar, Saurabh Patil, Shubham Mahajan, Ramendra Kumar Gupta, V.Udhayabanu “Age Hardening kinetics of Al-4.4Cu Alloy-Graphite composite synthesised via conventional Stir Casting followed by Ultrasonic Treatment “NMD-ATM-2017,2017-bits Goa.

JOURNAL PUBLICATIONS

  1. Abhilasha Jain, Ashwini Kumar, S.J.Dhoble and D.R.Peshwe “Persistent luminescence: An insight”, Renewable and Sustainable Energy Reviews, Vol. 65,pp. 135-153, 2016.
  2. Abhilasha Jain, Ashwini Kumar, S.J. Dhoble and D.R. Peshwe, “Influence Of Processing Parameters On  Long Lasting Hybrid Phosphors For LED Applications”, Published in AIP Conference proceedings 1728 020098, 2016.
  3. Swamini Chopra, Kavita Deshmukh,  Abhay Deshmukh,  C. L. Gogte and Dilip Peshwe, “The Influence of Multi-Walled Carbon Nanotubes on the Nucleation, Crystallization and Tensile Properties of PA-6/MWCNT Composites”, Journal of Basic and Applied Research International, Vol. 19(4), pp. 247-252, 2016.
  4. Swamini Chopra, Saisha Batthula, Kavita Deshmukh and Dilip Peshwe, “Tribological Behaviour of Multi-Walled Carbon Nanotubes (MWCNT) Filled Polybutylene Terephthalate (PBT) Nanocomposites”, Transactions of Indian Institute of Metals, Vol. 70(3), pp. 801-807, 2017.
  5. Swamini Chopra, Kavita Deshmukh and Dilip Peshwe, “Theoretical Prediction Of Interfacial Properties Of PBT/CNT Nanocomposites And Its Experimental Evaluation”, Mechanics of Materials, Vol.109, pp. 11–17, 2017.
  6. Manjusha M. Thawre, K.K. Verma, N. Jagannathan, D.R. Peshwe, R.K. Paretkar, and C.M. Manjunatha, “Effect Of Ply-Drop On Fatigue Life Of A Carbon Fiber Composite Under Fighter Aircraft Spectrum Load Sequence”,Composites Part B, Vol. 86 , pp. 120 -125,2016.
  7. Tanishka Rathi and Yogesh Mahajan, “Mathematical Model to Predict Property of Plain Carbon Steel” Vol. 5 Issue 8, IJERT, pp. 326-329, August 2016.
  8. Verma, R.V. Taiwade, C. Reddy and  R.K. Khatirkar, “Effect of friction stir welding process parameters on Mg-AZ31B/Al-AA6061 joints”, Materials and Manufacturing Processes, pp. 1-7, 2017.
  9. Vashishtha, R.K. Khatirkar and S.G. Sapate, “Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2− 25NiCr coatings”, Tribology International Vol. 105, pp. 55-68, 2017.
  10. Singh, R.K. Khatirkar, R.N. Chouhan, S.G. Sapate, “Development of Cube Recrystallization Texture in Strip Cast AA3004 Aluminium Alloy”,Transactions of the Indian Institute of Metals Vol. 69 (10), pp. 1833-1841, 2016.
  11. Unnikrishnan, A. Kumar, R.K. Khatirkar, S.K. Shekhawat and S.G. Sapate, “Structural Developments In Un-Stabilized Ultra Low Carbon Steel During Warm Deformation And Annealing”,Materials Chemistry and Physics, Vol. 183, pp. 339-348, 2016.
  12. Vashishtha, R.V. Taiwade, R.K. Khatirkar and A.S. Dhoble, “Effect Of Austenitic Fillers On Microstructural And Mechanical Properties Of Ultra-Low Nickel Austenitic Stainless Steel”, Science and Technology of Welding and Joining, Vol.21 (4), pp. 331-337, 2016.
  13. Hadke, M.S. Parihar, S. Shekhawat and R.K. Khatirkar, “A New Method For Automated Reconstruction Of Pre-Transformation Microstructures” Philosophical Magazine Letters, Vol. 96 (5), pp. 175-182, 2016.
  14. Chhatrasal Gayner, Deep Prakash, and Atul Ballal,“Influence Of Secondary Phase Dispersants And Porosity On Thermoelectric Properties Of Β-Fe0.91Mn0.09Si2”, Journal of Alloys and Compounds, Vol. 698, pp. 164-169,  March 2017.
  15. Lakshmiprasad Maddi, G.S. Deshmukh, A.R .Ballal, D.R. Peshwe, R.K. Paretkar, K. Laha and M.D. Mathew, “Effect Of Laves Phase On The Creep Rupture Properties Of P92 Steel”, Materials Science & Engineering A, Vol. 668, pp.215-223, June 2016.
  16. Nitesh Vashishtha, R.K. Khatirkar and S.G. Sapate, “Tribological behaviour of HVOF   sprayed WC-12Co, WC-10Co-4Cr and Cr3C2−25NiCr coatings”, Tribology International, Vol. 105, pp. 55-  69, 2017.
  17. A.B. Rathod , R.K. Khatirkar and S.G. Sapate , “Effect Of Composition And Microstructure On Slurry Abrasion Response Of Hardfaced Martensitic Stainless Steel” Tribology: Materials, surfaces and interfaces, Vol. 10(1), pp. 45-52, 2016.
  18. Rahul Unnikrishnan, Amit Kumar, Rajesh K. Khatirkar, Satish K.Shekhawat, Sanjay G.Sapate, “Structural Developments In Un-Stabilized Ultra Low Carbon Steel During Warm Deformation And Annealing”, Materials Chemistry and Physics, Vol. 1, pp. 339-348, 2016.
  19. Ankur V. Bansod, Awanikumar P. Patil, Abhijit P. Moon and Nilay N.Khobragade, “Intergranular Corrosion Behavior Of Low-Nickel And 304 Austenitic Stainless Steels” Journal of Materials Engineering and Performance, Vol. 25 (9), pp. 3615-3626, August 2016.
  20. Ashwini Kumar, S.J. Dhoble, D.R. Peshwe, Jatin Bhatt, J.J. Terblans and H.C. Swart “Crystal Structure, Energy Transfermechanism And Tunable Luminescence In Ce3+/Dy3+Co-Activated Ca20Mg3Al26Si3O68 Nanophosphors” Ceramics International, Vol. 42, pp. 10854-10865, 2016.
  21. Chattopadhyay, K.S.N. Satish Idury, Jatin Bhatt, K. Mondal and B. S. Murty “Critical Evaluation Of Glass Forming Ability Criteria,” Material Science and Technology, Vol. 32, pp. 380-400,2016.
  22. K.S.N. Satish Idury, B.S. Murty, Jatin Bhatt, “Identifying non-equatomic high entropy bulk metallic glass formers through thermodynamic approach: A theoretical perspective”, Journal of Non Crystalline Solids, Vol.450, pp. 164-173, 2016.
  23. K.S.N. Satish Idury, B.S. Murty and Jatin Bhatt “Interpreting Room Temperature Deformation Of Zr67Cu33 Metallic Glass Through Voronoi Cluster Dynamics,”Journal of Non Crystalline Solids, Vol. 454, pp. 59-69, 2016.
  24. Sandeep Kuriakose, Promod Kumar Patowari and Jatin Bhatt “Machinability Study Of Zr-Cu-Ti Metallic Gass By Micro Hole Drilling Using Micro-USM” Journal of Materials Processing Technology, Vol.24, pp. 42-51, 2017.
  25. Niraj Chawake, Rama Srinivas Varanasi, B. Jaswanth, Linford Pinto, Sanjay Kashyap, N.T.B.N. Koundinya, Ajeet K. Srivastav, Anshul Jain, M. Sundararaman and Ravi SankarKottada, “Evolution Of Morphology And Texture During High Energy Ball Milling Of Ni And Ni-5 Wt%Cu Powders”, Materials Characterization, Vol.120, pp. 90-96, October 2016.
  26. Niraj Chawake, N.T.B.N. Koundinya, Sanjay Kashyap, Ajeet K. Srivastav, Devinder Yadav Rajim Ali Mondal and Ravi SankarKottada, “Formation Of Amorphous Alumina At Grain Boundaries During Sintering Of Nanocrystalline B2 Aluminides”, Materials Characterization, Vol.119, pp. 186-194, September 2016.
  27. Guruswamy Kumaraswamy, Sanat Kumar, SiddharthKulkarni, Ajeet Srivastav, Priyadarshi Roy Chowdhury, G.V. Pavan Kumar, Erika Eiser, Alison Edwards, B.L.V. Prasad, Madivala G. Basavaraj, NagarajShetti, Michael Bockstaller, HimaniMedhi, Yogesh M. Joshi, Neena S. John, CharusitaChakravarty, VandanaShinde, RajdipBandyopadhyaya, Nicholas Kotov, RamananKrishnamoorti, Marc Couty, Jacques Jestin and DaanFrenkel, “Nanocomposites”: general discussion”, Faraday Discussions, Vol.186, pp. 277-293, April 2016.
  28. Vinothan N. Manoharan, Guruswamy Kumaraswamy, Madivala G. Basavaraj, Sanat Kumar, SiddharthKulkarni, RanjiniBandyopadhyay, Sudeep Punnathanam, Ajeet Srivastav, Lola Gonzalez-Garcia, G.V. Pavan Kumar, DaanFrenkel, RadhikaPoojari, Priyadarshi Roy Chowdhury, GouravShrivastav, Mukta Tripathy, Vimala Sridurai, Alison Edwards, Madhura Som, B.L.V Prasad, Lynn Walker, Neena S. John, Yon Ju-Nam, Yogesh M. Joshi, NirmalyaBachhar, CharusitaChakravarty, RajdipBandyopadhyaya, ZakiyaShireen, Nicholas Kotov, Oleg Gang, AlamgirKarim, Mario Tagliazucchi, Erika Eiser and Andrea Tao, “Applications to Soft Matter: general discussion“, Faraday Discussions, Vol. 186,pp. 503-527, April 2016.
  29. Guruswamy Kumaraswamy, Vinothan N. Manoharan, Jayant Singh, Nirmalya Bachhar, Siddharth Kulkarni, Ranjini Bandyopadhyay, Sudeep Punnathanam, Ajeet Srivastav, Priyadarshi Roy Chowdhury, Daan Frenkel, G.V. Pavan Kumar, Vimala Sridurai, Debdas Dhabal, Erika Eiser, Mukta Tripathy, Alison Edwards, B.L.V Prasad, Madivala G. Basavaraj, Hari Om Sharanam Yadav, Lynn Walker, Sanat Kumar, Charusita Chakravarty, Vandana Shinde, Rajdip Bandyopadhyaya, Jacques Jestin, Mohamed Laradji, Sofia Kantorovich, Nicholas Kotov, Oleg Gang, Sunil Kumar, Robert Botet, Hima BinduKolli, Yogesh M. Joshi and Pedro A. S´anchez, “Modelling and Theory: general discussion“, Faraday Discussions, Vol.186,  pp. 371-398, April 2016.
  30. Madhura Som, Sristi Majumdar, NirmalyaBachhar, Guruswamy Kumaraswamy, G. V. Pavan Kumar, Vinothan N. Manoharan, Sanat Kumar, Madivala G. Basavaraj, Siddharth Kulkarni, Ranjini Bandyopadhyay, Sudeep Punnathanam, Himani Medhi, Ajeet Srivastav, Daan Frenkel, Mukta Tripathy, Erika Eiser, Lola Gonzalez-Garcia, Priyadarshi Roy Chowdhury, Jayant Singh, Vimala Sridurai, Alison Edwards, B. L. V. Prasad, Amit Kumar Singh, Michael Bockstaller, Neena S. John, Jyoti Seth, Mayank Misra, Charusita Chakravarty, Vandana Shinde, Rajdip Bandyopadhyaya, Jacques Jestin, Radhika Poojari, Nicholas Kotov, Oleg Gang, Alamgir Karim, Yon Ju-Nam, Steve Granick, Semen Chervinskii and Andrea Tao, “Synthesis of Nanoparticle Assemblies: general discussion”, Faraday Discussions, Vol.186, pp. 123-152, April2016.
  31. Ajeet K. Srivastav, Joysurya Basu, Sanjay Kashyap, Niraj Chawake, Devinder Yadav and B.S. Murty, “Crystallographic-shear-phase-driven W18O49 nanowires growth on nanocrystalline W surfaces”, Scripta Materialia”, Vol.115, pp. 28-32, April 2016.
  32. Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “ Mechanical Characterization of Austempered Ductile Iron Obtained by Two Step Austempering Process”, Transactions of Indian Institute of Metals, pp. 1-7,April 2017.
  33. Sumitra Sharma, Ravindra V. Taiwade and Himanshu Vashishtha “Effect of Pulsed Current Gas Tungsten Arc Process on the Dissimilar Weldments between Nickel-based Superalloy/Austenitic Stainless Steel” Iron and Steel Institute of Japan, Vol. 57 No. 6 2017. (Accepted)
  34. Himanshu Vashishtha,  Ravindra V. Taiwade and Sumitra Sharma, “Effect of acetic acid on corrosion behavior of 201, 304 and 430 Stainless Steels” International Journal of Materials Research (formerly: ZeitschriftfuerMetallkunde) 15 February 2017 (Accepted).
  35. Sumitra Sharma, Ravindra V. Taiwade and Himanshu Vashishtha “Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments between Hastelloy C-276/AISI 321 Austenitic Stainless Steel”  Journal of Materials Engineering and Performance, Vol.26, pp. 1146–1157, 2017.
  36. Jagesvar Verma, Ravindra V. Taiwade, C. Reddy and R.K. Khatirkar, “Effect of Friction Stir Welding Process Parameters on Mg-AZ31B/Al-6061 Joints”, Materials and Manufacturing Processes, Taylor and Francis, January 2017. (Accepted)
  37. Himanshu Vashishtha, Ravindra V. Taiwade and Sumitra Sharma “Effect of Electrodes and Post Weld Solution Annealing Treatment on Microstructures, Mechanical properties and Corrosion Resistance of Dissimilar High Nitrogen Austenitic and Conventional Austenitic Stainless Steel Weldments”, Materials Transaction, Vol. 58, pp. 182-185, 2017.
  38. Jagesvar Verma and Ravindra V. Taiwade, “Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments – A Review” Journal of Manufacturing processes, Vol. 25  pp. 134-152, 2017.
  39. Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma and Awanikumar P. Patil,“Effect Of Welding Processes On Microstructural And Mechanical Properties Of Dissimilar Weldments Between Conventional Austenitic And High Nitrogen Austenitic Stainless Steels”, Journal of Manufacturing Processes, Vol.25, pp. 49-59, 2017.
  40. J. Verma and R.V. Taiwade, “Effect of Austenitic and Austeno-Ferritic Electrodes on 2205 Duplex and 316L Austenitic Stainless Steel Dissimilar Welds,” Journal of Materials Engineering and Performance, Vol. 25, pp. 4706-4717, 2016.
  41. J.Verma and R.V. Taiwade, “Dissimilar Welding Behavior Of 22% Cr Series Stainless Steel With 316L And Its Corrosion Resistance In Modified Aggressive Environment” Journal of Manufacturing Processes, Vol.24, pp. 1-10, 2016.
  42. J. Verma, R.V. Taiwade, R.K. Khatirkar, and A. Kumar, “A Comparative Study on the Effect of Electrode on Microstructure and Mechanical Properties of Dissimilar Welds of 2205 Austeno-Ferritic and 316L Austenitic Stainless Steel”, Materials Transactions, Vol. 57(4), pp. 494-500, 2016.
  43. J.Verma, R.V. Taiwade, R.K. Khatirkar, S.G. Sapate and A.D. Gaikwad, “Microstructure, Mechanical and Intergranular Corrosion Behavior of Dissimilar DSS 2205 and ASS 316L Shielded Metal Arc Welds”, Transactions Indian Institute of Metals, Vol. 70, pp. 225-237, January 2017.
  44. Himanshu Vashishtha, Ravindra V. Taiwade, Rajesh K. Khatirkar and Ashwinkumar S. Dhoble, “Effect of Austenitic fillers on Microstructural and Mechanical Properties of Ultra-Low Nickel Austenitic Stainless Steel”. Science and Technology of Welding and Joining Tayor and Francis, Vol. 21(4), pp. 331-337, 2016.
  45. V. Udhayabanu, K.R. Ravi and B.S. Murty, “Structure Property Correlation Of Fe-Al2O3 Nanocomposite Synthesized By High Energy Ball Milling”, Metallurgical and Materials Transactions A, pp. 1-11, 2016.
  46. M. Bradha, K. Kavitha, T. Vijayaraghavan, G. Vigila, P. Suresh, V. Udhayabanu, and Anuradha Ashok, “Solid State Synthesis And Analyses Of Sr4(Sr2Ta2)O11 Complex Perovskite With Reduced Heat Treatment Steps”, Materials Characterization, Vol.128, pp. 142-147, 2017.

CONFERENCE PUBLICATIONS

  1. K.S.N. SatishIdury, B.S. Murty and Jatin Bhatt, “An atomic cluster model to understand localized deformation behavior inmetallic glass“, International Conference on Metals and Materials Research  (ICMR  2016),Indian Institute of Science, Bangalore, June 20-22, 2016.
  2. Jatin Bhatt “Investigation on Mechanical Behavior of Nanocomposite derived from Zr based Metallic Glass“, 4th The International Conference on Advances in Materials and Materials Processing (ICAMMP-IV), Indian Institute of Technology, Kharagpur November 5-7, 2016.(Invited)
  3. K.S.N. Satish Idury, B.S. Murty and Jatin Bhatt “Indentation response on different substrates for Zr67Cu33 Metallic Glass ribbon“, 4th The International Conference on Advances in Materials and Materials Processing (ICAMMP-IV), Indian Institute of Technology, Kharagpur, November 5-7, 2016
  4. Jatin Bhatt “Materials Education at the Edge of Industrial Needs” 54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India. November 2016. (Invited)
  5. K.S.N. SatishIdury,K. Guruvidyathri, Kaivalya Deo, B.S. Murty and Jatin Bhatt, “On high entropy bulk metallic glass formation in Zr-Ti-Cu-Ni-Al system based on binary eutectic cluster model and CALPHAD”, 54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India. November 2016, (Best Oral Presentation Award).
  6. Sai Smaran, Arvindha Babu, Anuj Khond, Jatin Bhatt, Ajeet K. Srivastav, and Bhaskar Majumdar “Glass  forming ability, thermal stability and indentation characteristics of Hf-Cu-Ni metallic glasses”, 54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India ,November 2016.
  7. K.S.N. Satish Idury, B.S. Murty and Jatin Bhatt, “On optimization of non equiatomic high entropy bulk metallic glass compositions: A thermodynamic modeling study, Workshop on High Entropy Alloys,” organized jointly by Indian Institute of Technology-Hyderabad and University of Hyderabad, Hyderabad, India, 11-12th March, 2017. (Invited)
  8. Ritesh Kumar, Praveen, AzmeeraMaibu, VikramHastak, Saurabh Kumar Rai, D.R. Peshwe and Ajeet K. Srivastav, “TiO2 nanoparticles for photocatalytic applications”, CHEMIX’17, Visvesvaraya National Institute of Technology Nagpur; March, 2017. (Best Paper Award)
  9. VikramHastak, Saurabh Kumar Rai, Mangesh Lodhe, Niraj Chawake, Zahoor Ahmed Wani, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav, “In-Vitro cytotoxicity study of rGO-Fe3O4 nanocomposite for biomedical applications”, MRSI 2017, Indian Institute of Technology Bombay, Febraury,2017.
  10. Sai Smaran, Anuj Khond, Arvinda Babu, Jatin Bhatt, Bhaskar Majumdar and Ajeet K. Srivastav, “Glass forming ability, thermal stability and indentation characteristic of Hf-Cu-Ni metallic glass”, NMD-ATM 2016, Indian Institute of Technology Kanpur; November, 2016.
  11. Vikram Hastak, Saurabh Kumar Rai, Niraj Chawake, Mangesh Lodhe, Zahoor Ahmed Wani, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav, “In-Vitro cytotoxicity study of superparamagnetic iron oxide (Fe3O4) nanoparticles for biological applications“, NMD-ATM 2016, Indian Institute of Technology Kanpur; November,2016.
  12. Vikram Hastak, Saurabh Kumar Rai, Niraj Chawake, Mangesh Lodhe, Dhananjay Kumar Singh, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav, “Antibacterial activity of superparamagnetic iron oxide (Fe3O4) nanoparticles for biological applications” 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV, 2016), Indian Institute of Technology Kharagpur, November,2016.
  13. Nikhil Cherukupally, Akhil Madipelly, Sandeep Ganji, Ajay Pratap Singh, Ajeet K. Srivastav,” Synthesis and characterization of magnetic iron oxide nanoparticles using co-precipitation method”, CHEMIX’16, Visvesvaraya National Institute of Technology Nagpur, April, 2016.
  14. Dibya Jyoti Borah, P.K. Patowari, A. A Likhite, “Machinability Study of ADI Using Wire EDM”, XXX International Conference on Surface Modification Technologies (SMT 30), Milan, Itali, 29 June – 01 July, 2016.
  15. Jeetendra Kumar Malav, Ramesh C. Rathod, Suresh S. Umare, “Synthesis, Characterization and Anticorrosive performance of Electroactive polyimide/graphitic carbon nitride composites“, Surface Engineering and Paint Coatings with EXPO 2017, Pune,  February, 15-17, 2017.

JOURNAL PUBLICATIONS

  1. Lakshmiprasad Maddi, A.R. Ballal, D.R. Peshwe, R.K. Paretkar, K. Laha, M.D. Mathew, “Effect of tempering temperature on the stress rupture properties of Grade 92 steel” Materials Science and Engineering A 07/2015; 639:431-438.
  2. Dipika R. Barbadikar, A.R. Ballal, D.R. Peshwe, and M.D. Mathew,” Finite element analysis of deformation due to ball indentation and evaluation of tensile properties of tempered P92 steel” Metallurgical and Materials Transactions A (2015) accepted.
  3. Dipika R. Barbadikar, D.R. Peshwe, A.R. Ballal, J. Ganeshkumar, K. Laha and M.D. Mathew,” Investigation on mechanical properties of P92 steel using ball indentation technique” Materials Science and Engineering A 624 (2015) 92–101), 2015
  4. Abhilasha Jain, Ashwini Kumar, S.J Dhoble, D.R Peshwe, “Optical property investigations of polystyrene capped Ca2P2O7:Dy3+ persistent phosphor“, Materials Research Bulletin vol. 70, 2015, pp- 980–987
  5. G.S. Deshmukh, D.R. Peshwe, S.U. Pathak, J.D. Ekhe, “Nonisothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) and calcium carbonate nanocomposites“, Thermochimica Acta, Volume 606, 20 April 2015, Pages 66–76
  6. M.M. Thawre, K.N. Pandey, A. Dubey, K.K. Verma, D.R. Peshwe, R.K. Paretkar, N. Jagannathan, C.M. Manjunatha, “Fatigue life of carbon fibre composite T- joint under a standard fighter aircraft spectrum load sequence”, Composite Structures, Volume 127 1 September 2015, Pages 260–266
  7. M. M. Thawre, A Dubey, K. K Verma, D. R. Peshwe, N Jagannathan, CM Manjunatha, “A Study on the Fatigue Life of a Composite T-Joint Subjected to Transport Aircraft Spectrum Loads”, Transactions of the Indian Institute of Metals, 69-2 (2016) 409-413.
  8. Manjusha M. Thawre, K. K. Verma, N Jagannathan, D. R. Peshwe, R. K. Paretkar C.M. Manjunatha, ”Effect of plydrop on fatigue life of a carbon fiber composite under a fighter aircraft spectrum load sequence” Composites Part B,,86(2016) 120 -125.
  9. SP Ambade, C. S. Sable, A. P. Patil, Y. M. Puri, ‘Evaluating effect of 4th pass of SMAW and TIG welding on corrosion rate, microstructure and HAZ of low carbon steel’, International Journal of Applied Engineering Research, Vol 10 (71), 2015, pp 513-517.
  10. S. Vincent, M.J. Kramer, B. S. Murty, J. Bhatt “Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass” Materials and Design, 65, 98–103, (2015)
  11. S. Vincent, A. Daiwile, S.S. Devi, M.J. Kramer, M.F. Besser, B. S. Murty, J. Bhatt, “Bio-corrosion and Cytotoxicity Studies on Novel Zr55Co30Ti15 and Cu60Zr20Ti20Metallic Glasses” Met. & Mater. Trans.A 46A , 2422-2430, (2015).
  12. K.S.N. Satish Idury, B.S. Murty and Jatin Bhatt “Thermodynamic Modeling and Composition design for the formation of Zr-Ti-Cu-Ni-Al High Entropy Bulk Metallic Glasses” Intermetallics 65 (2015) 42-50.
  13. S. Vincent, K.S.N. Satish Idury , Aditya Gokhale, Joysurya Basu, B.S. Murty, Jatin Bhatt “Icosahedral cluster energetics in Zr60Cu10Al15Ni15 bulk metallic glass and their role on solidification behavior” Trans. Indian I Metals 68 , 1107-1112, (2015).
  14. C. Chattopadhyay, K.S.N. Satish Idury, Jatin Bhatt, K. Mondal, B. S. Murty “Critical evaluation of glass forming ability criteria” Mater. Sci. Tech. SER. 32, 380-400, (2016).
  15. Sandeep Fale, Ajay Likhite, Jatin Bhatt,“Compressive, tensile and wear behavior of ex–situ Al/AlN metal matrix nanocomposites” J. Comp. Mater.( Online available: DOI: 10.1177/0021998314540197).
  16. Ashwini Kumar, S.J. Dhoble, D.R. Peshwe, Jatin Bhatt, J. J. Terblans, H.C. Swart, “Crystal structure, energy transfer mechanism and tunable luminescence in Ce3+/Dy3+ co-activated Ca20 Mg3Al26Si3O68 nanophosphors“, Ceramics International (In Press)
  17. Sandeep Fale, Ajay Likhite, et al, “Nanoindentation, Compressive and Tensile Deformation Study of In-Situ Al–AlN Metal Matrix Composites”, Transactions of the Indian Institute of Metals, April 2015, Volume 68, Issue 2, pp 291-297
  18. Shreyash Hadke; Madhu T Kalimila; Shashwat Rathkanthiwar; Shivani Gour; Reshma Sonkusare; A.R. Ballal,“Role of fuel and fuel-to-oxidizer ratio in combustion synthesis of nano-crystalline nickel oxide powders”, Ceramics International, Volume 41, Issue 10, Part B, pp. 14949-14957, December 2015
  19. A Bhadauria, L. K. Singh, A.R. Ballal, R Vijay “Effect of Yttria Dispersion on Creep Properties of Pure Iron,” Transactions of the Indian Institute of Metals, Volume 69, Issue 2, pp. 253-259 , November 2015.
  20. M. Lakshmiprasad Maddi , D. Barbadikar, M. Sahare, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, K. Laha, M. D. Mathew, “Microstructure evolution during short term creep of 9 Cr-0.5 Mo-1.8 W steel”, Transactions of the Indian Institute of Metals, Volume 68, Issue 2, pp 259-266 , September 2015
  21. Shreyash Hadke; Madhu T Kalimila; Shashwat Rathkanthiwar; Shivani Gour; Reshma Sonkusare; A.R. Ballal “Monoclinic to Cubic Phase Transformation in Combustion Synthesized Gadolinium Oxide“, Materials Today: Proceedings, Volume 2, Issues 4–5, pp. 1276-1281, July 2015
  22. Verma Jagesvar, Taiwade R.V., Khatirkar Rajesh K., Sapate S.G., Gaikwad A.D. “Microstructure, mechanical and intergranular corrosion behavior of dissimilar DSS 2205 and ASS 316L shielded metal arc welds” Transactions of Indian Institute of Metals (accepted) 2016
  23. Hadke Shreyash, Parihar Manendra Singh, Shekhawat Satish, Khatirkar Rajesh Kisni (2016). “A new method for automated reconstruction of pre-transformation microstructures” Philosophical Magazine Letters (accepted), April/2016
  24. Vashishtha Himanshu , Taiwade Ravindra V. , Khatirkar Rajesh K., Dhoble Ashwinkumar S. (2016), “Effect of austenitic fillers on microstructural and mechanical properties of ultra-low nickel austenitic stainless steel“, Science and Technology of Welding and Joining, 21, No. 4, 331-337, 2016
  25. Singh Rohit, Khatirkar Rajesh K., Chouhan R. N., Sapate Sanjay G. (2016),” Developent of cube recrystallization texture in strip cast AA3004 aluminium alloy“. Transactions of Indian Institute of Metals (available online on SpringerLink), 2016
  26. Verma Jagesvar, Taiwade R.V., Khatirkar, R.K., Kumar A. (2016)., “A comparative study on the effect of electrode on microstructure and mechanical properties of dissimilar weld of 2205 austeno-ferritic and 316L austenitic stainless steel“, Materials Transactions, 57, No. 4, 494-500, 2016
  27. Rathod Avishkar, Sapate S.G., Khatirkar Rajesh (2016), “Effect of composition and microstructure on slurry abrasion response of hardfaced martensitic stainless steel“. Tribology-Materials, Surfaces and Interfaces, 10, No. 1, 1-8, 2016
  28. Hadke Shreyash, Khatirkar Rajesh K., Shekhawat Satish, Jain Shreyans, Sapate Sanjay G. (2015). “Microstructure evolution and abrasive wear behaviour of Ti-6Al-4V alloy“, Journal of Materials Engineering and Performance, 24, No. 10, 3969-3981, 2015
  29. Singh Kritika, Khatirkar Rajesh K., Sapate Sanjay G. (2015), “Microstructure evolution and abrasive wear behaviour of D2 steel“, Wear, 328-329, 206-216, 2015
  30. Harsh Pathak, Yash Lodha, Yogesh Mahajan, “A case study of bending of TMT Steel Bars” International Journal of Engineering Research and Technology (IJERT), Volume. 4 – Issue. 05 , May – 2015
  31. H. Agrawal, P. Sharma, P. Tiwari, Ravindra V. Taiwade and R. K. Dayal, “Evaluation of Sensitization and Self-healing Behaviour of AISI 304 Stainless Steel using Electrochemical Techniques” Trans Indian Inst Met 68(4):501–511 (2015).
  32. Guruswamy Kumaraswamy, Sanat Kumar, Siddharth Kulkarni, Ajeet Srivastav, Priyadarshi Roy Chowdhury, G.V. Pavan Kumar, Erika Eiser, Alison Edwards, B.L.V. Prasad, Madivala G. Basavaraj, Nagaraj Shetti, Michael Bockstaller, Himani Medhi, Yogesh M. Joshi, Neena S. John, Charusita Chakravarty, Vandana Shinde, Rajdip Bandyopadhyaya, Nicholas Kotov, Ramanan Krishnamoorti, Marc Couty, Jacques Jestin and Daan Frenkel, “Nanocomposites: general discussion“, Faraday Discussions 186 (2016) 277-293.
  33. Vinothan N. Manoharan, Guruswamy Kumaraswamy, Madivala G. Basavaraj, Sanat Kumar, Siddharth Kulkarni, Ranjini Bandyopadhyay, Sudeep Punnathanam, Ajeet Srivastav, Lola Gonzalez-Garcia, G.V. Pavan Kumar, Daan Frenkel, Radhika Poojari, Priyadarshi Roy Chowdhury, Gourav Shrivastav, Mukta Tripathy, Vimala Sridurai, Alison Edwards, Madhura Som, B.L.V Prasad, Lynn Walker, Neena S. John, Yon Ju-Nam, Yogesh M. Joshi, Nirmalya Bachhar, Charusita Chakravarty, Rajdip Bandyopadhyaya, Zakiya Shireen, Nicholas Kotov, Oleg Gang, Alamgir Karim, Mario Tagliazucchi, Erika Eiser and Andrea Tao, “Applications to Soft Matter: general discussion“, Faraday Discussions 186 (2016) 503-527.
  34. Guruswamy Kumaraswamy, Vinothan N. Manoharan, Jayant Singh, Nirmalya Bachhar, Siddharth Kulkarni, Ranjini Bandyopadhyay, Sudeep Punnathanam, Ajeet Srivastav, Priyadarshi Roy Chowdhury, Daan Frenkel, G.V. Pavan Kumar, Vimala Sridurai, Debdas Dhabal, Erika Eiser, Mukta Tripathy, Alison Edwards, B.L.V Prasad, Madivala G. Basavaraj, Hari Om Sharanam Yadav, Lynn Walker, Sanat Kumar, Charusita Chakravarty, Vandana Shinde, Rajdip Bandyopadhyaya, Jacques Jestin, Mohamed Laradji, Sofia Kantorovich, Nicholas Kotov, Oleg Gang, Sunil Kumar, Robert Botet, Hima Bindu Kolli, Yogesh M. Joshi and Pedro A. Sánchez, “Modeling and Theory: general discussion“, Faraday Discussions 186 (2016) 371-398.
  35. Madhura Som, Sristi Majumdar, Nirmalya Bachhar, Guruswamy Kumaraswamy, G. V. Pavan Kumar, Vinothan N. Manoharan, Sanat Kumar, Madivala G. Basavaraj, Siddharth Kulkarni, Ranjini Bandyopadhyay, Sudeep Punnathanam, Himani Medhi, Ajeet Srivastav, Daan Frenkel, Mukta Tripathy, Erika Eiser, Lola Gonzalez-Garcia, Priyadarshi Roy Chowdhury, Jayant Singh, Vimala Sridurai, Alison Edwards, B. L. V. Prasad, Amit Kumar Singh, Michael Bockstaller, Neena S. John, Jyoti Seth, Mayank Misra, Charusita Chakravarty, Vandana Shinde, Rajdip Bandyopadhyaya, Jacques Jestin, Radhika Poojari, Nicholas Kotov, Oleg Gang, Alamgir Karim, Yon Ju-Nam, Steve Granick, Semen Chervinskii and Andrea Tao, “Synthesis of Nanoparticle Assemblies: general discussion“, Faraday Discussions 186 (2016) 123-152.
  36. Ajeet K. Srivastav, Joysurya Basu, Sanjay Kashyap, Niraj Chawake, Devinder Yadav and B.S. Murty, “Crystallographic-shear-phase-driven W18O49 nanowires growth on nanocrystalline W surfaces“, Scripta Materialia 115 (2016) 28-32.
  37. Niraj Chawake, N.T.B.N. Koundinya, Ajeet K. Srivastav and R.S. Kottada, “On correlation between densification kinetics during spark plasma sintering and compressive creep of B2 aluminides“, Scripta Materialia 107 (2015) 63-66.

CONFERENCE PUBLICATIONS

  1. M. M. Thawre, A. Dubey, K. K. Verma, D. R. Peshwe, N. Jagannathan, C. M. Manjunatha “A Study on the Fatigue Life of a Composite T-Joint Subjected to Transport Aircraft Spectrum Loads” Creep Fatigue 7, Kalapakkam, Jan. 2016.
  2. A. P. Patil, ‘Investigation on addition of Zn and Mn to improve resistance of Cu-10Ni alloy to sulfide polluted seawater’, 17th Asia pacific Corrosion Control Conference, paper No. 17032, 28-30,2016 January, IIT Mumbai, India
  3. Ankur Bansod, A. P. Patil, NK Khobragade, ‘Investigation on susceptibility of Cr-Mn Austenitic SS and 304 Austenitic SS to intergranular corrosion using electrochemical techniques’, 17th Asia pacific Corrosion Control Conference, paper No. 17080, 28-30 January, 2016 IIT Mumbai, India
  4. Jatin Bhatt, “Characterization of Nanomaterials” Workshop on Characterization and Surface Engineering, MIT, Aurangabad, India April 9-10, 2015, (Invited).
  5. Jatin Bhatt “Cast Structure in Aluminium Alloys” Workshop on Microscopic Techniques in Aluminium Industry, Jawaharlal Nehru Aluminium Research Development and Design Centre, Nagpur, India April 16-18, 2015, (Invited).
  6. Jatin Bhatt “Synthesis of Nanomaterials ” Short Term Training Programme on Advances in Materials and Manufacturing Engineering”, G. H. Raisoni College of Engineering, Nagpur, India June 8-12, 2015, (Invited).
  7. Jatin Bhatt “Smartmaterials -Short Term Training Programme” on Advances in Materials and Manufacturing Engineering, G. H. Raisoni College of Engineering, Nagpur, India June 8-12, 2015, (Invited).
  8. K.S.N. Satish Idury, B.S. Murty and Jatin Bhatt, “Diffusion studies in Cu-Zr Metallic glass through Molecular Dynamics Simulations,” 6th International Conference on Solidification Science and Processing, DMRL, Hyderabad India November 24-27, 2015.
  9. Gaurave Gaurakhede, Ram Chouhan, Jatin Bhatt, “Microstructural optimization of aluminium-zirconium conductor alloy,” 6th International Conference on Solidification Science and Processing, DMRL, Hyderabad India November 24-27, 2015.
  10. Sandeep Fale, Ajay Likhite, Jatin Bhatt “Compression, Tensile and wear study of ex-situ Al-AlN Metal Matrix Nanocomposites” 6th International Conference on Solidification Science and Processing, DMRL, Hyderabad India , November 24-27, 2015.
  11. S. Vincent, K.S.N. Satish Idury , Aditya Gokhale, Joysurya Basu, B.S. Murty, Jatin Bhatt, ” Intermediate stage cluster dynamics in Zr60Cu10Al15Ni15bulk metallic glass forming alloys and their role on solidification behavior” 6th International Conference on Solidification Science and Processing, DMRL, Hyderabad India,November 24-27, 2015.
  12. Nidhi Singh, Jaganntah Nayak, Jatin Bhatt, S. B. Arya, “Electrochemical impedance spectroscopy study of Zr42Cu50Ag8 bulk metallic glass in artificial physiological solutions” 17th Asian Pacific Corrosion Control Conference (APCCC17): Achieving Sustainable Development, IIT Bombay, Mumbai ,January 27 – 30, 2016.
  13. Rajesh K. Khatirkar and Amit Kumar, “Orientation dependence of stored energy and dislocation structure evolution during cold rolling of IF steel“, International Conference of Electron Microscopy Society of India, Mumbai, (2015).
  14. Amit Gajhbiye, Sunil Nair and Rajesh K. Khatirkar, “Precipitation behaviour of AISI S31803 (2205) duplex stainless steel“, NMD-ATM, Coimbatore, (2015).
  15. Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, “Corrosion behaviour of austenitic and ferritic stainless steels in acetic acid“, 17th Asian Pacific Corrosion Conference (APCCC17): Achieving Sustainable Development held at Victor Menezes Convention Centre, IIT Bombay, Mumbai, India January 27 – 30, 2016 (paper number-17027).
  16. Jagesvar Verma, Ravindra Vasantrao Taiwade, Rajesh K. Khatirkar, Shashank P. Mandlik, “Evaluation of microstructural, mechanical properties and corrosion resistance of duplex stainless 2205/316L dissimilar weldment“, 17th Asian Pacific Corrosion Conference (APCCC17): Achieving Sustainable Development held at Victor Menezes Convention Centre, IIT Bombay, Mumbai, India January 27 – 30, 2016 (paper number- 17078).
  17. Sumitra Sharma, Himanshu Vashishtha, Ravindra V. Taiwade, “Study on corrosion behaviour of AISI 304/Cr-Mn stainless steel dissimilar weldments produced by SMAW process using E308L and E309L“, 17th Asian Pacific Corrosion Conference (APCCC17): Achieving Sustainable Development held at Victor Menezes Convention Centre, IIT Bombay, Mumbai, India January 27 – 30, 2016 (paper number-17015).
  18. Nikhil Cherukupally, Akhil madipelly, Sandeep Ganji, Ajay Pratap Singh, Ajeet K. Srivastav, “Synthesis and characterization of magnetic iron oxide nanoparticles using co-precipitation method”; CHEMIX’16, organized by IIChE Nagpur Regional Centre and IIChE Student Chapter, VNIT, Nagpur, held at Visvesvaraya National Institute of Technology, Nagpur during 02-03 April, 2016.
  19. Ajeet K. Srivastav and Rajiv Shekhar; “Temperature dependent magnetization in cobalt nanowires electrodeposited within alumina template using sulphate bath: The role of boric acid as a buffer”, Nanoparticle Assembly: From Fundamentals to Applications, Faraday Discussion, organized by Royal Society of Chemistry, held at Indian Institute of Technology Bombay during 07-09 January, 2016.

JOURNAL PUBLICATIONS

  1. K.N.Pande, D. R. Peshwe, Anupama Kumar, “Influence of cryogenic treatment on wear behaviour of Poly (tetrafluroethylene) – Teflon”, Indian journal of cryogenics, Vol 38 (2013)
  2. S. M. Kakani, S. S. Zadgaonkar, S. A. Pande, K. N. Pande, D. R. Peshwe, “Study and Evaluation on Effect of Ultra-Violet (UV) Radiation on the Structural and Mechanical Properties of Talc filled Polypropylene Co-polymer (TFPP)” Transactions of the Indian Institute of Metals, DOI 10.1007/s12666-013-0261-y
  3. S.R. Charde, M.L. Prasad, A. R. Ballal, D.R. Peshwe, M.D. Mathew, R.K. Paretkar, “Effect of Multiaxiality on the Creep Rupture Properties of 316L(N) SS”, Procedia Engineering, Volume 55, 2013, Pages 474-480
  4. S.R. Charde, A. R. Ballal, D. R. Peshwe, M.D. Mathew, R.K. Paretkar, “Effect of Notch on Creep Behavior of 316L(N) SS”, Procedia Engineering, Volume 55, 2013, Pages 517-525
  5. S.R. Charde, A. R. Ballal, D.R. Peshwe, M.D. Mathew, R. K. Paretkar, “Effect of Notch on Creep Behavior of 316L(N) SS Weld Joint” Procedia Engineering, Volume 55, 2013, Pages 526-533
  6. M. Lakshmi Prasad, A. R. Ballal, R.K. Paretkar, D.R. Peshwe, “Stress Rupture Properties of 316L(N) Stainless Steel under the Influence of Multiaxiality at Various Stress Levels”, Procedia Engineering, Volume 55, 2013, Pages 548-552
  7. Ashwini Kumar, S.J. Dhoble, D.R. Peshwe, Jatin Bhatt, “Structural and luminescence characteristics of Sr3Al8SiO17:Eu2+ nanophosphors”, Journal of Alloys and compound, Volume 578, 25 November 2013, Pages 389-393
  8. Ashwini Kumar, S.J. Dhoble, D. R. Peshwe, Jatin Bhatt, “Structural and Photoluminescence Properties of Nepheline-Structure NaAlSiO4: Dy3+ Nanophosphors” Journal of Alloys and compound,Accepted for publication.
  9. Dipika R. Barbadikar, G.S. Deshmukh, L. Maddi, K. Laha, P. Parameswaran, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, M. Nandagopal, M. D. Mathew, “Effect of normalizing and tempering temperatures on microstructure and mechanical properties of P92 steel” (Submitted to International journal of pressure vessels and piping)
  10. Dipika R. Barbadikar, A. R. Ballal, D. R. Peshwe, J. Ganeshkumar, K. Laha and M.D. Mathew, “A study on the effect of tempering temperature on tensile properties of P92 steel by automated ball indentation technique”.
  11. Rahul Unnikrishnan, K.S.N Satish Idury, T.P. Ismail, Alok Bhadauria, S.K. Shekhawat, Rajesh K. Khatirkar, and S. G. Sapate, “Effect of Heat Input on the Microstructure, Residual Stresses and Corrosion Resistance of 304L Austenitic Stainless Steel Weldments”, Materials Characterization
  12. Abin Baburaj, K.B. Shishupal Singh Chaudhary, Rajesh K. Khatirkar and S.G. Sapate, “Abrasive wear behaviour of heat treated En31 steel”, ISIJ International, 53, No. 8, (2013) pp. 1471-1478.
  13. Kiran Kumar Surthi, Rajesh K. Khatirkar and Sanjay G. Sapate, “Effect of mode of rolling on recrystallization kinetics and microstructure evolution in interstitial free high strength steel sheet”, ISIJ International, 53, No. 2, (2013) pp. 356-364.
  14. Avishkar Rathod, Sanjay G. Sapate and Rajesh K. Khatirkar, “Scaling Laws of Wear by Slurry Abrasion of Mild Steel“, Applied Mechanics and Materials Vols. 446-447 (2014) pp 126-130
  15. Tejas Umale, Amarjit Singh, Y Reddy, R K Khatirkar and S G Sapate, “Abrasive wear behavior of copper –SiC and coper –SiO2 composites“, International Conference on Ceramics, Bikaner, India International Journal of Modern Physics: Conference Series Vol. 22 (2013) 416–423
  16. S. N. Paul , V. V. Karambelkar, J. D. Ekhe, “Experimental design of high yield polypyrole by taguchi method” ,Journal of engineering and application, Vol 3(6) 2013, 89-95
  17. Rahul Unnikrishnan, K.S.N Satish Idury, T.P. Ismail, Alok Bhadauria, S.K. Shekhawat, Rajesh K. Khatirkar and S.G. Sapate, “Effect of Heat Input on the Microstructure, Residual Stresses and Corrosion Resistance of 304L Austenitic Stainless Steel Weldments”, Materials Characterization
  18. Himanshu Vashistha, R.V. Taiwade, Rajesh K. Khatirkar, A. Ingle and R.K. Dayal “Welding behavior of low nickel chromium-manganese stainless steel”, ISIJ International, 54, No. 6, (2014)
  19. Abin Baburaj, K.B. Shishupal Singh Chaudhary, Rajesh K. Khatirkar and S.G. Sapate, “Abrasive wear behaviour of heat treated En31 steel”, ISIJ International, 53, No. 8, (2013) pp. 1471-1478.
  20. Kiran Kumar Surthi, Rajesh K. Khatirkar and Sanjay G. Sapate, “Effect of mode of rolling on recrystallization kinetics and microstructure evolution in interstitial free high strength steel sheet”, ISIJ International, 53, No. 2, (2013) pp. 356-364.
  21. Sandeep Fale, Ajay Likhite, Jatin Bhatt, “Nucleation Criteria for the Formation of AluminumNitride in Aluminum Matrix by Nitridation Transactions of the Indian Institute of Metals” Trans. Indian I Metals 66(2013) 265-271.
  22. B. Dipika Barbadikar,Rashmi Gautam,Sanjay Sahare, Rajendra Patrikar and Jatin Bhatt “Optimization of process parameter for the synthesis of silicon quantum dots using low pressure chemical vapour deposition” Bull. Mater. Sci. 36 (2013) 483-490.
  23. Ashwini Kumar, S.J. Dhoble, D. R. Peshwe, Jatin Bhatt, ”Structural and luminescence characteristics of Sr3Al8SiO17:Eu2+ nanophosphor“ J. Alloys Compd. 578 (2013) 389-393.
  24. S. Vincent, Adeeba Khan, B. S. Murty, J. Bhatt “Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass: an experimental case study” J. Non-Crystalline Solids 379 (2013) 48-53.
  25. S. Vincent, J. Bhatt, B. S. Murty “Thermodynamic basis for glass formation in Cu-Zr richternary systems and their synthesis by mechanical alloying” Met. Mater. Trans. A (DOI:10.1007/s11661-013-1855-z)
  26. Sandeep Fale, Ajay Likhite, Jatin Bhatt, “Study on quantification of oxide phases in ex-situAlN/Al metal matrix nanocomposites” (In Press: Trans. Indian I Metals.)
  27. Sandeep Fale, Ajay Likhite, Jatin Bhatt, “Nanoindentation studies of ex -situ AlN/Al metal matrix nanocomposites”, (In Press: J. Alloys Compd.)
  28. Sandeep Fale, Ajay Likhite, Jatin Bhatt, “The wear behavior of in-situ Al-AlN metal matrix composites” (In Press: Trans. Indian I Metals.)
  29. Ashwini Kumar, S.J. Dhoble, D. R. Peshwe, Jatin Bhatt,” Structural and Photoluminescence Properties of Nepheline-Structure NaAlSiO4: Dy3+ Nanophosphors “J. Alloys Compd.
  30. Dipika R. Barbadikar, G.S. Deshmukh, L Maddi, K Laha, P Parameswaran, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, M Nandagopal, M.D. Mathew, “Effect of normalizing and tempering temperatures on microstructure and mechanical properties of P92 steel”, International Journal of Pressure Vessels and Piping
  31. M. Lakshmi Prasad , A.R. Ballal, R.K. Paretkar, D.R. Peshwe, ”Stress Rupture Properties of 316L (N) Stainless Steel Under the Influence of Multiaxiality at Various Stress Levels“, Procedia Engineering 55 (2013) 548-552
  32. S.R.Charde, M.L. Prasad, A. R. Ballal, D.R.Peshwe, M.D.Mathew, R. K. Paretkar, “Effect of Multiaxiality on the Creep Rupture Properties of 316L(N) SS“, Procedia Engineering 55 (2013) 474-480
  33. S. R. Charde, A. R. Ballal, D. R. Peshwe, M. D. Mathew, R. K. Paretkar, “Effect of Notch on Creep Behavior of Weld Joint“, Procedia Engineering 55 (2013) 526-533
  34. S. R. Charde, A. R. Ballal, D. R. Peshwe, M. D. Mathew, R. K. Paretkar, “Effect of notch on creep behavior of 316 L (N) Stainless Steel“, Procedia Engineering 55 (2013) 517-525
  35. Shivani Gour, Raghvendra Tewari, Geogy J. Abraham, Atul Ballal, G.K. Dey, “Synthesis, Characterization And Study Of Corrosion Behaviour Of Hf Based Bulk Metallic Glass“, Transactions of PMAI
  36. J. Raju, Manjusha S. Duragkar, N. Jagannathan, R.K.Paretkar & C. M. Manjunatha, “Prediction of Onset of Mode I Delamination Growth Under a Tensile Spectrum Load“, Journal of Materials Science Research; Vol. 3, No. 2; pp 44-51, March 2014, Published by Canadian Center of Science and Education
  37. R. C. Rathod, S. G. Sapate, R. Raman and W. S. Rathod, “Stress Corrosion Cracking Study of Aluminium Alloys using Electrochemical Noise Analysis”, Journal of Materials Engg and Performance, Vol. 22 (12), pp3801-3809, December-2013 (SCI Journal)
  38. R. C. Rathod, S. S. Umare, V. K. Didolkar, B. H. Shambharkar, A. P. Patil, “Production and Characterization of PANI/TiO2 Nanocomposites: Anticorrosive application on 316LN SS”, Trans. Indian Inst Met, Vol. (66(2), pp 97-104, April 2013(SCI Journal)
  39. W. S. Rathod, A. S. Khanna, R. C. Rathod, “Effect of N2 and He Carrier gases on Oxidation Behaviour of Cold Sprayed CoNiCrAlY Powder to Deposits Bond Coats”, Trans. Indian Inst Met, 67 (2), pp 247- 262, March 2014 (SCI Journal)
  40. W. S. Rathod, A. S. Khanna, J. Karthikeyan, R. C. Rathod, “Oxidation and Corrosion behavior of CoNiCrAlY”, Accepted on 14/2/2014 in Surface Engineering (SCI Journal)
  41. B. H. Shambharkar, S. S. Umare, R. C. Rathod, “Synthesis and Characterization of polyaniline-Mn3O4 nanocomposites: Electrical conductivity and Magnetic studies”, Accepted on 20/1/2014 in Trans. Indian Inst Met (SCI Journal)
  42. W.S. Rathod, A.S. Khanna, J. Karthikeyan, R. C. Rathod, “Oxidation behavior of CoNiCrAlY Bond Coats Produced by High Velocity Oxy-Fuel and Cold Gas Dynamic Sprayed Nitrogen Gas”, American International Journal of Research in Science, Technology Engineering and Mathematics, Vol. 3 (1), pp29-34, June- August 2013
  43. W.S. Rathod, A.S. Khanna, R. C. Rathod, “Characterization of Bond Coats Produced by High Velocity Oxy-Fuel and Cold Gas Dynamic Sprayed N2 Gas”, Inter. J. Engg Innovative Tech, Vol. 2 (11), pp1-8, May 2013
  44. R. V. Taiwade, A. P. Patil, R. D.  Ghugal, S. J.  Patre, R. K. Dayal, “Effect of welding passes on heat effected zones and tensile properties of AISI 304 stainless steel and Chrome-Manganes Austenitic stainless steel”, ISIJ International, Vol 53 (2013), pp102-109.
  45. R. V. Taiwade, A. P. Patil, S. J .Patre, R. K. Dayal, “Effect of solution annealing on susceptibility to intercrystalline corrosion of stainless steel with 20% Cr and *% Ni”, Journal of Materials Engineering and performance, Vol. 22 (2013), pp1716-1728.
  46. M. H. Alkhatafi and A. P. Patil, “Rapid solidification of Al-7 wt% Si, using the twin-roll technique”, International Journal of Science and Engineering Research, Vol 4, 2013, pp 1214-1247.
  47. R. C. Rathod, S. S. Umare, V. K. Didolkar, B. H. Shambharkar, A. P. Patil, “Production and characterization of PANI/TiO2 Nano-composites: Anticorrosive application on 316LN SS”, Transactions of IIM, Vol 66(2), 2013, pp 97-104
  48. M. S. Bihade, A. P. Patil, “Analysis of Electrochemical current noise from metastable pitting of SS304 in NaCl solutions”, Transactions of IIM, Vol 66, 2013, pp 155-161
  49. Sandeep Phale, Ajay Likhite, Jatin Bhatt, “Nucleation Criteria for the formation of Aluminum Nitride in Al matrix by nitridation”, Trans IIM, June 2013 66(3). 265-271
  50. Priyanshu Bajaj, K. Anirudh, Vinayak Poddar, Ajay Likhite, Dilip Peshwe, and  S.U. Pathak, “Effect of Austenitizing Temperature on Microstructure and Wear Properties of Low Carbon Equivalent Austempered Ductile Iron” accepted for publication in Indian Foundry Journal, October 2013 issue
  51. S.A. Patil, Ajay Likhite et al, “Characterization of Cryogenically Treated CADI”, International Journal of Advanced Research in Science & Engineering IJARSE, Vol No 2, Issue No 6, June 2013
  52. C. L. Gogte, Ajay Likhite, D.R. Peshwe, “Feasibility of Cryogenic Treatment for Improving Lattice Strain Distribution in AA7010 Alloy”, Journal of Materials and Metallurgical Engineering, Accepted for Publication
  53. C. L. Gogte, Ajay Likhite, D.R. Peshwe et al, “ Effect of Cryogenic Processing on Surface Roughness of Age Hardenable AA6061 alloy”, Journal of Materials and Metallurgical Engineering, Accepted for Publication
  54. Himanshu Vashishtha, R. V. Taiwade, R. K. Khatirkar, Avinash Ingle and R.K.Dayal, “Welding Behaviour of Low Nickel Chrome-Manganese Stainless Steel,” Iron and Steel Institute of Japan International, Volume 54, No 06. (2014). (SCI Journal)
  55. R. V. Taiwade, Rohan Shukla, Himanshu Vashishtha, Avinash Ingle and R. K. Dayal, “Effect of Grain Size on Degree of Sensitization of Chrome-Manganese Stainless Steel”, iron and Steel Institute of Japan International, Volume 53, No 12. (2013), pp 2206-2212. (SCI Journal)
  56. R. V. Taiwade, A.P. Patil, S. J. Patre and R. K. Dayal “Effect of Solution Annealing on Susceptibility to Intercrystalline Corrosion of Stainless Steel with 20% Cr and 8 % Ni”, Journal of Materials Engineering and Performance (ASM International), Vol. 22 (2013), pp 1716-1728. (SCIe Journal)
  57. R. V. Taiwade, A. P. Patil, R. D. Ghugal, S. J. Patre and R. K. Dayal, “Effect of Welding Passes on Heat Affected Zone and Tensile Properties of AISI 304 Stainless Steel and Chrome-Manganese Austenitic Stainless Steel”, Iron and Steel Institute of Japan (ISIJ) International, Vol. 53 (01) (2013) pp 102-109. (SCI Journal)
  58. Yogesh Mahajan, D.R.Peshwe “Failure analysis of 9% Cr-Mo Steel component” International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, June-2014
  59. Yogesh Mahajan, D. V. Moghe, D. R. Peshwe, “Failure analysis of Engine Valve Spring” International Journal of Engineering Research and Technology (IJERT) ISSN: 2278-0181, Vol.3 Issue 05, May-2014
  60. Yogesh Mahajan, D. R. Peshwe, “Failure analysis of Tension Spring” International Journal of Engineering Research and Technology (IJERT), ISSN: 2278-0181, Vol.3 Issue 05, May-2014
  61. Surabhi Bisen, Tejas Umale, Yogesh Mahajan, D. R. Peshwe, “Study of Abrasive wear of Al-Zn-Mg Alloy by Taguchi Method” International Journal of Engineering Research and Technology (IJERT), ISSN: 2278-0181, Vol.2 Issue 12, December-2013

CONFERENCE PUBLICATIONS

  1. P. Y. Deshmukh, D. R. Peshwe, S. U. Pathak, “Characteristic TGA behavior of rice husk ash SiO2” Oral presentation at NCGCE 2013 (National conference on green chemistry engineering) Chemical Engineering Department VNIT , 22/03/2013 , 190-197
  2. A. Jain, S. G. Dhoble, D. R. Peshwe, ‘Synthesis and Luminescence Characterization of Polymer Capped Ca2P2O7:Dy3+ Phosphor’ UGC sponsored national conference on Advanced Materials (NCAM-2014) March-01-2014.
  3. L. P. Maddi, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, M. D. Mathew, “Effect of tempering temperature on the stress rupture properties of P92 steel” at NMD ATM 2013, IIT (BHU) 12-15 November 2013
  4. Ashish Kulkarni*, Ashwini Kumar, Varun Mohan, S.J. Dhoble, Jatin Bhatt and D.R. Peshwe, “Structural and Photoluminescence study of Solution-Combustion synthesized Ba13Al22Si10O66: xEu3+ (x = 0.1 to 1.0 mol %) Red-Nanophosphors” presented in International Conference on Luminescence (ICL’14), July 2014, Wroclaw, Poland.
  5. Ashwini Kumar, S. J. Dhoble, D. R. Peshwe, Jatin Bhatt, “Structural characterization and influence of sintering temperature on luminescence properties of Sr0.91Mg2Al5.82Si9.18O30:Eu3+ nanophosphors” (Selected for presentation in Material Research Society(MRS) -2013,BOSTON), Dec.1-6,2013
  6. Ashwini Kumar, S. J. Dhoble, D. R. Peshwe, Jatin Bhatt, “Luminescence properties of Ce3+/Dy3+ activated Ca20Al26Mg3Si3O68 nanophosphor”, 67th National Metallurgical Day-Annual Technical Meeting of Indian Institute of Metals, November 2013, Varanasi, India.
  7. A. B Rathod, S G Sapate, R .K. Khatirkar, “Slurry abrasive wear behavior of weld deposited alloy steel using silica sand slurry“, Proceedings of the International Conference on Emerging Materials and processes, (2014), IMMT, Bhuneshwar, India
  8. Kritika Singh, R. K. Khatirkar and S. G. Sapate, “Effect of microstructure on the abrasive wear of D2 steel”, Proceedings of the International Conference on Advances in Tribology, (2014), NIT, Calicut, India.
  9. Tejas Umale, Amarjit Singh, Y. Reddy, R. K. Khatirkar and S. G. Sapate, “Abrasive wear behaviour of copper-SiC and copper-SiO2 composites”, Int. Conf. on ceramics, Bikaner, December 2013
  10. Avishkar Rathod, Sanjay G. Sapate and Rajesh K. Khatirkar, “Scaling Laws of Wear by Slurry Abrasion of Mild Steel“, International Conference on Manufacturing and Optimisation, ICMO 13, New Delhi, 2013
  11. Rahul Unnikrishnan, S.K. Shekhawat, Rajesh K. Khatirkar and S.G. Sapate, “Microstrural and textural developments in ULC steel during deformation in ferritic region and annealing”, Proceedings of the International Conference on Emerging Materials and Processes, (2014), IMMT, Bhuneshwar, India
  12. N. S. More, N. Diomidis, S- Mischler ,S.N. Paul, Manish Roy, “Sliding tribo corrosion behavior of Ti-12.5 Mo alloy in physiological solution” CORSYM,2014, IIT Mumbai.
  13. R.V. Didolkar and V. K. Didolkar, “Biology education for sustainable development: Environmental Concerns” 15th WCCI conference in Education, 28th Dec, 2012 to 3rd Jan, 2013, Garden Villa Hotel, Kaosiung, Taiwan.
  14. S.A. Pathak, R.V. Didolkar and V. K. Didolkar, “Vermi composting in industrial work soils“, International conference on comparative Endocrinology & physiology-21-23rd oct, 2013 sitabardi Meadows, Nagpur (M.S).
  15. Rahul Unnikrishnan, S.K. Shekhawat and R. K. Khatirkar, “Microstructural and textural developments in ULC steel during deformation in ferritic region and annealing”, Proceedings of the International Conference on Emerging Materials and Processes, (2014), IMMT, Bhuneshwar, India.
  16. Kritika Singh, R. K. Khatirkar and S. G. Sapate, “Effect of microstructure on the abrasive wear of D2 steel”, Proceedings of the International Conference on Advances in Tribology, (2014), NIT, Calicut, India.
  17. Tejas Umale, Amarjit Singh, Y. Reddy, R. K. Khatirkar and S.G. Sapate, “Abrasive wear behaviour of copper-SiC and copper-SiO2 composites”, Int. Conf. Cer., Int. J. of Mod. Phys.: Conf. Ser., vol. 22, (2013), pp. 416-423.
  18. P. Y. Deshmukh, Jatin Bhatt, S. U. Pathak, “Quantative wear analysis of Al based MMC reinforced with Cu coated SiO2 particles extracted from Rice Husk Ash (RHA)” Proc. International Conference on Advanced Functional Materials CSIR-NIIST, Trivandrum, 353-354,2013.
  19. Satish Idury, B.S. Murty and Jatin Bhatt, “Designing the composition with high Glass Forming Ability in Cu-Ti-Zr-Pd system by Thermodynamic Modeling”, Proc. on International conference on Emerging Materials and Processes, CSIR-IMMT Bhubneswar , 228-231,2014.
  20. Dipika R. Barbadikar, A. R. Ballal, D. R. Peshwe, J. Ganeshkumar and M.D. Mathew, “A study on the effect of tempering temperature on tensile properties of P92 steel by automated ball indentation technique”, at ICONS-2014, IGCAR Kalpakkam, February 4-7, 2014
  21. Lakshmiprasad Maddi, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, and M. D. Mathew, “Effect of tempering temperature on the stress rupture properties of P92 steel”, at NMD-ATM 2013, Varanasi, November 12-15, 2013
  22. N Jagannathan, N. Raju, J. Radhakrishnan, Duragkar M.S, & Manjunatha C.M. (2013), “Onset of Mode I Delamination Growth in a Carbon Fiber Composite Under Constant Amplitude Fatigue Loads“, Proceedings of INCCOM-12, Bangalore, India, 12-13 December 2013, 299-304.
  23. J Raju, Manjusha S Duragkar, N Jagannathan, CM Manjunatha, (2013), “Finite Element Analysis and Prediction of Onset of Mode I Delamination Growth under a Tensile Spectrum Load Sequence” Proceedings of INCCOM-12, Bangalore, India, 12-13 December 2013, 202-207.
  24. K. N. Pande, M. M. Thawre, J. G.  Bhatt, D. R. Peshwe, R. K. Paretkar, K. K. Verma, G. M. Kotresh, C. M. Manjunatha “Constant Amplitude Fatigue Behavior of a Co-cured and Co-bonded Carbon Fiber Composite T-Joint” Proceedings of INCCOM-12, Bangalore, India, 12-13 December 2013.
  25. R. C. Rathod, V.K. Didolkar, S.S. Umare, G. S. Bhusari. “Synthesis and Characterization of PANI/CaCO3 Nanocomposites: Anticorrosion Performance on 316 LN SS“. Oral presentations in International Symposium on Surface Protective coatings, SSPC 2014, Ahmedabad.
  26. R. C. Rathod, S.S. Umare, V.K. Didolkar, S.G. Sapate, “Synthesis and Characterization of PC/PANI Composites: Anticorrosion Performance on 316 LN SS“, Oral presentations in International Symposium on Surface Protective coatings, SSPC 2013, Mumbai-400087.
  27. M. Shaglouf, F Al-Tahar, A. P. Patil, R. A. Cottis, “The influence of fluid flow on electrochemical noise generation”, presented in CORCON 2013 organized by NACE Gateway India Section during 30-09-2013 to 03-10 2013 at New Delhi.
  28. S. A. Ambade, A. P. Patil, Y. M. Puri, “Effect of welding process on corrosion of 409M ferritic stainless steel“, CORSYM 2014, organized by IIT Bombay and NACE Gateway India Section during Feb 20-21 2014 at IIT Bombay
  29. A. Ingle, R. V. Taiwade, H. Vashistha and R. K. Khatirkar, “Evaluation of Intergranular Corrosion Susceptibility of AISI 304L Stainless Steel Using Electrochemical Techniques“,  CORSYM 2014, (NACE international) held at IIT Bombay, February 20-21, 2014.
  30. H. Vashistha, R. V. Taiwade, R. K. Khatirkar, and A. Ingle,”Effect of Thermal Treatment and Welding on Susceptibility to Intergranular Corrosion of 200-Series Stainless Steel”, presented Poster at CORSYM 2014, (NACE international) held at IIT Bombay, February 20-21, 2014.

JOURNAL PUBLICATIONS

  1. Y. Deshmukh, D. R. Peshwe, S. U. Pathak, “FTIR and TGA analysis in relation with the % crystallinity of the SiO2 obtained by burning rice husk at various temperatures” Advanced Materials Research Vol. 585 (2012) 77-81, published by Trans Tech  Publications Ltd, Switzerland.
  2. Y. Deshmukh, S. U. Pathak, “Influence of varying SiO2 % on the mechanical properties of Al based MMC” Trans Indian Inst Met (December 2012) 65(6):741–745
  3. K. N. Pande, D. R. Peshwe, Anupama Kumar, “Influence of cryogenic treatment on wear behaviour of Poly (tetrafluroethylene) – Teflon”, Indian journal of cryogenics, Vol 38 (2013).
  4. R. S. Ghotkar, K. N. Pande, D. R. Peshwe, “Evaluation and Study of Commercially Available Adhesives”, (IOSR) Journal of Mechanical and Civil Engineering (IOSRJMCE), Volume 2, Issue 1 (July-Aug 2012), PP 01-07.
  5. M. Kakani, S. S. Zadgaonkar, S. A. Pande, K. N. Pande, D. R. Peshwe, “Study and Evaluation on Effect of Ultra-Violet (UV) Radiation on the Structural and Mechanical Properties of Talc filled Polypropylene Co-polymer (TFPP)” Trans of the Ind Institute of Metals, DOI 10.1007/s12666-013-0261-y.
  6. R. V. Taiwade, A. P. Patil, R. D. Ghugal, S. J. Patre, R. K. Dayal, “Effect of welding passes on Heat affected zone and Tensile properties of AISI 304SS and Cr-Mn ASS” ISIJ International, Vol 53 (2013) No.1 pp. 102-109.
  7. R. V. Taiwade, A. P. Patil, S J Patre,  R K Dayal, “A comparative study of intergranular corrosion of AISI 304 stainless steel and chrome-manganese austenitic stainless steel“, ISIJ International, Vol. 52, No. 10, (2012), pp.1879-1887.
  8. R. V. Taiwade, A. P. Patil, R. D. Ghugal, S. J. Patre, R. K. Dayal “Effect of Solution Annealing on Susceptibility to Intercrystalline Corrosion of stainless steel with 20% Cr. and 8% Ni.” Journal of Materials Engineering and performance (ASM International) Published Online : 28 December2012.  DOI: 10.1007/511665-012-0467-x.
  9. R.C. Rathod, S.S. Umare, V.K. Didolkar, B.H. Shambharkar, A. P. Patil, ” Production and characterization of PANI/Tio2 Nano Composite : Anticorrosive application on 316 LNSS“. Trans Indian Institute Met. (April 2013) 66 (2): 97-104.
  10. S.Vincent, B. S. Murty and Jatin Bhatt, “Prediction of bulk metallic glass formation in Cu-Zr-Ag-Hf system by thermodynamic and topological modeling” Trans. Indian I Metals 65 (2012) 827-831.
  11. Ramakrishna Rao, A.S. Gandhi, S. Vincent, J. Bhatt, B. S. Murty ”Prediction of Glass Forming Ability Using Thermodynamic Parameters” Trans. Indian I Metals 65 (2012) 559-563.
  12. Prashant Parhad, Sudhakar Umale, Ajay Likhite, Jatin Bhatt, “Characterization of Inoculated Low Carbon Equivalent Iron at Lower Austempering Temperature” Trans. Indian I Metals 65 (2012) 449-458.
  13. Pallavi Deshmukh,, Jatin Bhatt, Dilip Peshwe, Shailkumar Pathak “Determination of Silica Activity Index and XRD, SEM and EDS studies of amorphous silica extracted from Rich Husk Ash” Trans. Indian I Metals 65 (2012)63-70.
  14. Dipika Barbadikar, Rashmi Gautam, Sanjay Sahare, Rajendra Patrikar and  Jatin Bhatt, “Optimization of process parameter for the synthesis of silicon quantum dots using low pressure chemical vapour deposition” Bull. Mater. Sci. (In press).
  15. Sandeep Fale, Ajay Likhite, Jatin Bhatt, “Nucleation Criteria for the Formation of Aluminum Nitride in Aluminum Matrix by Nitridation Transactions of the Indian Institute of Metals” Trans. Indian I Metals (In Press).
  16. Kiran kumar Surthi, Rajesh K. Khatirkar and Sanjay G. Sapate, “Effect of mode of rolling on recrystallization kinetics and microstructure evolution in interstitial free high strength steel sheet” ISIJ International, Vol. 53,nO.2, (2013) pp.356-364.
  17. S. G. Sapate, Amit Kumar, R. K. Khatirkar, and S. Chandel, “Abrasive wear properties plasma nitrided H 11 steel” Proc. Of of Int. Conf. on Advances in Mechanical Engineering,(2012).
  18. S. Narkhede, P. Bhoyar, S. Dhone, R. K. Khatirkar, and S.G. Sapate, “Effect of inter- critical annealing on microstructure and wear behaviour of En-8 steel”, Int. J. Theor.   Appl. Res. Mech. Engg., 1 (2012) 113-116.
  19. R. K. Khatirkar, Prashant Yadav, S. G. Sapate, “Structural and wear characterization of heat treated en24 steel” ISIJ International, 52, No. 7, (2012), pp. 1378-1384.
  20. A. Kashiwar, N. Phani Vennela, S .L. Kamath and R. K. Khatirkar, “Effect of solution annealing temperature on precipitation in 2205 duplex stainless steel”, Materials characterization, 74,(2012) 55
  21. K. N. Pande, D. R. Peshwe, and Anupama Kumar, “Effect of the cryogenic treatment on Polyamide and optimization of its parameters for the enhancement of wear performance“, Trans of the Indian Institute of Metals, Vol. 65, Issue 3, June 2012, pp 313-319.
  22. K. N. Pande, D. R. Peshwe, and Anupama Kumar, “Optimization of cryo-treatment parameters for PTFE by Quantum-chemical approach and its evaluation through mechanical, thermal and structural characterization“, Trans of the Indian Institute of Metals. 65 (4), Aug 2012 365-373.
  23. K  N. Pande, G. S. Deshmukh, D. R. Peshwe, S. U. Pathak, “Effect of nano CaCO3 on the mechanical and wear performance of PBT composites”, NanoTrends-A Journal of Nanotechnology & its Applications, Vol 12, Issue 2, Apr, 2012, pp 11- 21.
  24. K. N. Pande, D. R. Peshwe, and Anupama Kumar, “Study of Low temperature effect on strength of Polymers” Strength of Materials, Accepted for publication.
  25. R. S. Ghotkar, K. N. Pande, D. R. Peshwe, “Evaluation and Study of Commercially Available Adhesives”, Journal of Mechanical and Civil Engineering (IOSRJMCE), Volume 2, Issue 1 (July-Aug 2012), PP 01-07
  26. Pallavi Deshmukh, Jatin Bhatt, Dilip Peshwe, Shailkumar Pathak, “Development and Characterization of Al based MMC by Using RHA and Metallurgical Grade SiO2 with Varying Percentage of Mg“, A Journal of Nanotechnology & its Applications, Vol 12, Issue 2, Apr, 2012, pp 01-10.
  27. Chandrashekhar Gogte, Dilip Peshwe, Ravindra Paretkar, “On the presence of eta carbide in the cryogenically treated high speed steel”, Advanced Materials Research, Vol. 602-604(2013) pp 356-359
  28. Chandrashekhar Gogte, Dilip Peshwe, Ajay Likhite, Sachin Lomate, “On the Mechanism of the Effect of the Cryogenic Treatment on High Speed Steels“, Advanced Materials Research, Vol. 383-390(2013) pp 7138-7142,
  29. S.S. Umale, P.P. Parhad, Ajay Likhite, S.U. Pathak, “Austempering Heat treatment of low carbon equivalent ductile irons“, Indian Foundry Journal, Vol 58, No 5, May 2012 Vol 58, No 5, May 2012
  30. S.A. Patil, Ajay Likhite, S.U. Pathak, “Development and wear analysis of Carbidic Austempered SDuctile Iron” (CADI), Indian Foundry Journal, Vol 58, No 8, August 2012.

CONFERENCE PUBLICATIONS

  1. P.Y. Deshmukh*, S.U. Pathak “Mechanical behavior of Al based MMC reinforced by RHA SiO2 particles with varying % of Mg” Proceedings of the 3rd Asian Symposium on Materials & Processing ASMP 2012, IIT Madras,    Chennai, 100-101.
  2. P.Y. Deshmukh, D. R. Peshwe, S. U. Pathak “Characteristic TGA behavior of rice husk ash SiO2” Chemical Engineering Department VNIT , , conference proceeding Page no. 190-197. Oral presentation at NCGCE 2013 (National conference on green chemistry engineering).
  3. P.Y. Deshmukh, J. Bhatt, D. R. Peshwe, S. U. Pathak “FTIR and TGA analysis in relation with the %  crystallinity of the SiO2 obtained by burning rice husk at various temperatures” Oral presentation at International Conference on Advances in materials and processing : challenges and opportunities,AMPCO 2012, IIT Roorkee.
  4. P.Y. Deshmukh, J. Bhatt, D. R. Peshwe, S. U. Pathak “Effect of increasing the amount of SiO2 and Mg on the mechanical  properties of Al based MMC” Poster presentation, Fifth International Conference on Solidification Science and Processing  (ICSSP5) at IIT Bhubaneswar, India
  5. P.Y. Deshmukh, J. Bhatt, D. R. Peshwe, S. U. Pathak  Oral presentation at ISRS 2012 Chennai (International Symposium for Research Scholar)
  6. P.Y. Deshmukh, J. Bhatt, D. R. Peshwe, S. U. Pathak, “ Characteristic TGA behavior of rice husk SiO2” Poster presentation a National conference of advance functional materials (NCAFM), Chemistry department, VNIT, Nagpur , conference proceedings,37
  7. P.Y. Deshmukh, D. R. Peshwe, S. U. Pathak, “Thermal characterization of rice husk nano SiO2 by TGA/DTA” Chemical Engineering Department VNIT, Oral presentation at NCGCE 2013 (National conference on green chemistry engineering).
  8. Ashwini Kumar*, Jatin Bhatt, S.J. Dhoble and D. R. Peshwe, “Sol-gel synthesized BaMg2Al6Si9O30: Eu2+ phosphor” AMPCO-2012, , IIT ROORKEE.
  9. Ashwini Kumar*, Jatin Bhatt, S.J. Dhoble and D. R. Peshwe, “Synthesis and Luminescence Properties of NaAlSiO4:Dy3+ nanophosphor”, ISRS-2012, IIT MADRAS, 13-15 Dec 2012.
  10. G.S. Deshmukh, J. D. Ekhe, D. R. Peshwe, S. U. Pathak, “Effect of impact modifier on mechanical and interfacial properties of short glass fiber reinforced PBT composites” AMPCO-2012, IIT ROORKEE.
  11. K. N. Pande, D. R. Peshwe, Anupama Kumar, “Effect of cryogenic treatment on adhesion phenomenon  at interface in wollastonite reinforced PBT composites” AMPCO-2012, , IIT ROORKEE.
  12. Lakshmiprasad Maddi, A. R. Ballal, D. R. Peshwe, R. K. Paretkar, M.D. Mathew, “Effect of heat treatments on the stress rupture properties of P92 steel” at ISRS-2012 at IITM, December , 2012.
  13. Dipika Barbadikar*, Rashmi Gautam, Sanjay Sahare, Rajendra Patrikar, Jatin Bhatt “Influence of process parameters on the density of Silicon Quantum Dots by Low Pressure Chemical Vapour Deposition” International Conference On  Advances in Materials and Processing Challenges and Opportunities–AMPCO 2012 at IIT Roorkee, November 2012
  14. Ramakrishna Rao, S. Vincent, J. Bhatt, B. S. Murty*, “Qualitative Prediction of Glass Forming Ability Using Thermodynamic Parameters”  5th International conference on Solidification Science and Processing organized by IIT Bhubneswar, November 2012.
  15. S.Vincent*, B. S. Murty, J. Bhatt, “Prediction of bulk metallic glass formation in Cu based quaternary system by thermodynamic and topological modeling” 5th International conference on Solidification Science and Processing organized by IIT Bhubneswar, November 2012.
  16. S.Vincent*, Adeeba Khan, B. S. Murty, J. Bhatt “Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass” 5th International Symposium for Research Scholars, Chennai, India., December 2012.
  17. Sandeep Fale*, Ajay Likhite, Jatin Bhatt, “Synthesis and Characterization of AlN by modified sol-gel process” 5th International Symposium for Research Scholars, Chennai, India, December 2012.
  18. S.Vincent*, J. Bhatt, B. S. Murty “Thermodynamic basis for glass formation in Cu-Zr rich ternary systems and their synthesis by mechanical alloying” 142nd Annual Meeting and Exhibition TMS 2013, San Antonio, Texas, USA, March 2013.
  19. G.S. Deshmukh, D. R. Peshwe, S. U. Pathak, J.D.Ikhe, “Effect of Impact modifier on mechanical and interfacial properties of short glass fiber reinforced PBT composites”, International Conference AMPCO-2012, IIT Roorkee, Nov. 2-4,2012, 24.
  20. Ashwini Kumar, S.J. Dhoble, Jatin Bhatt, D. R. Peshwe, “Optical properties of Sr3Al8SiO17:Eu2+ nanophosphor”, International Conference, ICNANO-2012, Nov. 2-4,2012, 24.
  21. S. G. Fale, A. A. Likhite, Jatin Bhatt, “Influence of fcc & hcp-AlN Particulates on Mechanical Properties of Al-AlN MMCs”, International Conference AMPCO-2012, IIT Roorkee, 94, Nov. 2-4,2012,
  22. S. G. Sapate, A. Rathod, A. S. Ahmed, “Effect of expérimental variables in tribological properties of martensitic stainless steels“, International conference on mechanical and industrial engineering, ICMIE 2012, 8 th April 2012,  136-40.
  23. Avishkar Rathod, S. G. Sapate and R K Khatirkar, ‘Shape factor analysis of abrasive particles used in slurry abrasion testing’, International conference on mechanical and industrial engineering , ICMIE 2012, 8 th April 2012,  165-170
  24. S. Narkhede, P. Bhoyar, S. Dhone, R. K. Khatirkar, and S. G. Sapate,  “Effect of inter-critical annealing on microstructure and wear behavior of En-8 steel”, Int Conference on advances in Mechanical Engg. Panaji, 8th Nov  2012

JOURNAL PUBLICATIONS

  1. J. G. Bhatt, S.U. Pathak, D.R. Peshwe, “Synthesis & Characterization of Al-Mg –SiO2 particulate composite using Amorphous SiO2 from R.H. Ash” Transaction Indian Institute of metals, Volume 64, Issue 6, pp 575-581, Dec-2011
  2. J. G. Bhatt, S.U. Pathak, D. R. Peshwe, “Determination of silica Activity Index & XRD, SEM & EDS studies of amorphous SiO2 from R.H.Ash” Transaction Indian Institute of metals, Volume 65, Issue 1, pp 63-70. Feb.- 2012
  3. S. U. Pathak, D. R. Peshwe, “Study on effect of mineral addition on the mechanical thermal & structural properties of PBT composite” Journal of polymers research Vol No. – 18 No.- 5, pp. 1081-1090, 2011
  4. S.U. Pathak, D.R. Peshwe, “Influence of functionalized elastomers adhesives on Mechanical and Interfacial properties of PBT/glass foiled composites”, Journal of polymers Composite Vol No. – 33, Issue.- I pp 58-67, 2011
  5. A. A. Likhite, D. R. Peshwe, S. U. Pathak. “Development of Austempered inoculated low CE irons”, Indian foundry Journal, Vol No. – 57, pp.06, 2011
  6. D.R. Peshwe, “Texture & formability of one-step and two –step cold rolled & appealed interstitial free high strength steel sheets”, Metallurgical and Materials Transaction A, Vol -42A pp.1692-1708, 2011
  7. M. M. Thawre, D. R. Peshwe, R. K. Paretkar, “Construction of constant fatigue life diagram for a carbon fiber composite”, Transaction of Indian Institute of Metals, Vol -64A Issue.- 3 pp. 301-303, June- 2011
  8. J. G. Bhatt, D. R. Peshwe, “Thermodynamics prediction of bulk metallic glass forming alloy in ternary zr-cu-x (X=Ag,A1,T,Ga) systems”, Journals of Alloys & Compounds, pp. 3495–3499, 2011
  9. A. P. Patil, “Study on corrosion behavior of Cr-Mn alloy in clean and sulphide polluted seawater” Copper Topics Vol No. – 36, 2011
  10. A. P. Patil, R. V. Taiwade, “Studies or welding and sensitization of Cr-Mn Austenitic stainless steels”, Transaction of Indian Institute of metal, Volume 64, Issue 6, pp 513-518 , Dec.- 2011
  11. S.N. Paul, “Tribocorrosion behavior of β-Ti alloys”, Material Science & Engineering, Vol No. – 31, pp. 400-408, 2011
  12. S.N. Paul, “Fretting corrosion behavior of Ti alloys”, Wear, Vol No. – 271, pp.1093-1102, 2011
  13. S.N. Paul, “High yield polypyrole”, Journals of Materials Science, Vol No. – 46, pp. 5324-5331, 2011
  14. R.C. Rathod, “Synthesis of processable polyaniline and its anticorrosion performance on 316LNSS”, International Journal of Minerals, Metals and Materials, Online, 2011
  15. R. C. Rathod, V. K. Didolkar, S. G. Sapate, R. V. Taiwade, “Processable PANi- Ti nano composite for anticorrosive application on 316 LN SS”, International Technical Trade Journal for paint coatings and Allied chemical Industries, Vol No. – 2, pp. 61-64, 2011
  16. R. C. Rathod, S. G. Sapate, “Stress Corrosion Cracking Study of aluminum alloys using electro-chemical noise analysis”, Journal of corrosion science and Engineering, Vol No. – 14, 2011
  17. A.A. Likhite, “Synthesis of Al-AlN metal matrix composites by nitrogenation”, Tran. Of Indian Institute of Metals Vol – 64 Issue- 1,2, pp. 111- 115, 2011
  18. A.A. Likhite, “Micro structural characterization of Austempered Inoculated low carbon Equivalent cast Irons” Slovenian Foundry men Society Journal , Vol. 118, 2011
  19. A. A. Likhite, “On the Mechanism of the effect of the cryogenic treatment on high speed steels”, Advance Materials Research, Vol – 383-390, pp. 7138- 7142, 2011
  20. J. G. Bhatt, “Improvement of multicrystalline silicon water solar cells by post-fabrication wet-chemical etching in phosphoric acid”, Bulletin of material science, Vol – 34 No.- 07, pp. 01-04, 2011
  21. R. K. Khatirkar, “Comparison of recrystallization textures in interstitial free and interstitial free high strength steels”, Materials chemistry and physics, Vol – 127, pp. 128-136, 2011
  22. R. K. Khatirkar, “Strain localizations in ultra low carbon steel: Exploring the role of dislocations”, ISIJ International Vol – 51, pp. 849-856, 2011
  23. R.K. Khatirkar, “Orientation dependent recovery in interstitial free steel”, ISIJ International Vol – 52, No. 5, 888-897, 2012
  24. R.K. Khatirkar, “ND//<111> texture in interstitial free steel: The defining role of growth inhibition” ISIJ International Vol – 52 , No. 5, pp. 898-905, 2011
  25. R.K. Khatirkar,” Structural and wear characterization of heat treated EN24 steel”, ISIJ International Vol – 52 , No. 7, pp. 1370-1376
  26. S G Sapate, N Haque, “Effect of microstructure on slurry erosion behaviour of weld hardfacing alloys”, Journal of materials : Design and applications, volume 225, pp. 49-59, 2011.

CONFERENCE PUBLICATIONS

  1. A. R. Ballal, D. R. Peshwe, R. K. Paretkar, “Effect of multiaxiality on the creep rupture properties of 316L (N) stainless steel”, 6th International conference on creep, fatigue and creep-fatigue Interaction, at Mamallapuram, pp. 369-375, 2012
  2. A. R. Ballal, D. R. Peshwe, R. K. Paretkar, “Effect of notch on creep behavior of 316L (N) stainless steel”, 6th International conference on creep, fatigue and creep-fatigue Interaction, at Mamallapuram, pp. 416-425, 2012
  3. A. R. Ballal, D. R. Peshwe, R. K. Paretkar, “Effect of notch on creep behavior of weld joint”, 6th International conference on creep, fatigue and creep-fatigue Interaction, at Mamallapuram, pp. 435-443, 2012.
  4. A. R. Ballal, D. R. Peshwe, R. K. Paretkar, “Stress rupture properties of 316L (N) stainless steel under the influence of multiaxiality at various stress levels”, 6th International conference on creep, fatigue and creep-fatigue Interaction, at Mamallapuram, pp. 1120-1125, 2012