Dr. A. B. Andhare

Brief Bio
Dr.Atul Andhare has completed his B. E. Mechancial Engineering from the Government College of Enginering Karad, Maharashtra in 1987. Later he obtained his M. Tech. in Design of Machines and Mechanisms from VRCE Nagpur in 1994. In 2007, he was awarded Ph. D. by the Indian Institute of Technology Bombay Mumbai. Dr. Atul has worked in various organisations such as VNIT Nagpur, IIT Bombay, SVNIT Surat and Government Polytechnics of Maharashtra, during last 35 years. He had also worked in industry for four years immediately after graduation. He joined VNIT Nagpur in July 2008 and since then working in VNIT. He has handled various resposibilities at the Institute level. Some major responsibilities were - Associate Dean (Training and Placement), Hostel Warden, Chairman M. Tech. Admission Committee, etc. So far he has guided ten Ph.D. theses and more than 35 M. Tech. dissertations. His areas of interest are - Machine design, Machine condition monitoring, machining of super alloys, etc.

Brief Bio

Dr.Atul Andhare has completed his B. E. Mechancial Engineering from the Government College of Enginering Karad, Maharashtra in 1987. Later he obtained his M. Tech. in Design of Machines and Mechanisms from VRCE Nagpur in 1994. In 2007, he was awarded Ph. D. by the Indian Institute of Technology Bombay Mumbai. Dr. Atul has worked in various organisations such as VNIT Nagpur, IIT Bombay, SVNIT Surat and Government Polytechnics of Maharashtra, during last 35 years. He had also worked in industry for four years immediately after graduation. He joined VNIT Nagpur in July 2008 and since then working in VNIT. He has handled various resposibilities at the Institute level. Some major responsibilities were - Associate Dean (Training and Placement), Hostel Warden, Chairman M. Tech. Admission Committee, etc. So far he has guided ten Ph.D. theses and more than 35 M. Tech. dissertations. His areas of interest are - Machine design, Machine condition monitoring, machining of super alloys, etc.

Education

Sr. No.	Degree	Year	Specialization	University
1	B. E.	1987	Mechanical Engineering	Shivaji University Kolhapur
2	M. Tech.	1994	Design of Machines and Mechanisms	Nagpur Unversity
3	Ph. D.	2007	Mechanical Engineering	IIT Bombay

Contact

Phone:	Email:	Address:
0712-2801163	abandhare@mec.vnit.ac.in	Department of Mechanical Engineering
9730007509	abandhare@gmail.com	Visvesvaraya National Institute of Technology Nagpur - 440010

Research Interest
Machine Design, Machinery Condition Monitoring, Machining of Super alloys.

Sr. No.	Title	Funding Agency	Role	Year	Amount (in Lakhs INR)
1	Wooden Toy Pilot Project	KVIC – RENTI	Coordinator	2022-23	14.37
2	High Skill Training Lab	KVIC – RENTI	Coordinator	2022-23	18.02
3	Investigation of design modifications of SRM to reduce vibration and noise in EV	DST SERB	Co-PI	2022-23	28.31

Sr. No.	Title	Funding Agency	Role	Year	Amount (in Lakhs INR)
1	Ambient Noise Monitoring and Vibration Monitoring at Sensitive Receptors Along the Navi Mumbai Metro Rail Corridor Line 1 – from station 7 to 11	Maharashtra Metro Rail Corporation Ltd. Navi Mumbai	Coordinator	2022	3.42
2	RLA Study of Existing River Water Pump House at Bhusawal Thermal Power station, Bhusawal.	Chief Engineer (Projects), Bhusawal TPS, MAHAGENCO.	Coordinator	2022	11.21
3	Ambient Noise Monitoring and Vibration Monitoring at Sensitive Receptors Along the Navi Mumbai Metro Rail Corridor Line 1 – from station 1 to 7	Maharashtra Metro Rail Corporation Ltd. Navi Mumbai	Coordinator	2023	4.79
4	Vibration Analysis of Motor Generator Set	Vishvas Power Engineering Services Pvt. Ltd.	Coordinator	2023	0.08

Sr. No.	Description	Author(s)	Publisher	ISBN	Year
1	Recent Advances in Condition Monitoring Select Proceedings of NCCM 2024	Editors: Andhare A B; Ganeshkumar P V S	Springer, Singapore.	DOI: https://doi.org/10.1007/978-981-96-5791-9 ; ISBN 978-981-96-5791-9	2025
2	Lightweight Machine Learning Techniques for Predictive Maintenance in Industrial IoT Systems	Shahade, A.S., Andhare, A.B.	Springer, Singapore.	DOI: . https://doi.org/10.1007/978-3-032-18138-1_1	2026
3	AR and IoT Integrated Machine Environment (AIIME). In: Intelligent Control, Robotics, and Industrial Automation. RCAAI 2022. Lecture Notes in Electrical Engineering, vol 1066	Shahade, A.S., Andhare, A.B.	Springer, Singapore.	DOI: https://doi.org/10.1007/978-981-99-4634-1_29	2023
4	“Harmonic Response Analysis of Photovoltaic Module Using Finite Element Method”. In: Machines, Mechanism and Robotics. Lecture Notes in Mechanical Engineering.	Chaitanya V. Bhore, Atul B. Andhare, Pramod M. Padole, Chinmay R. Chavan, Vishal S. Gawande, V. Surya Prashanth, R. Balagopal Chary	Springer, Singapore	DOI: https://doi.org/10.1007/978-981-16-0550-5_116	2021
5	“Effect of Machining Parameters on Surface Roughness and Tool Flank Wear in Turning of Haynes 25 Alloy” In: Advances in Mechanical Engineering, Select Proceedings of ICAME 2020	Atul Andhare, Kannathsan K and Manoj Funde	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0,	2020
6	“Optimization of Machining Parameters for Turning of Haynes 25 Cobalt Based Super Alloy”, In: Advances in Mechanical Engineering, Book Subtitle: Select Proceedings of ICAME 2020,	Atul Andhare, Kannathsan K and Manoj Funde,	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0,	2020
7	“Finite Element Simulation for Turning of Haynes 25 Super Alloy”, In: Advances in Mechanical Engineering, Book Subtitle: Select Proceedings of ICAME 2020	Atul Andhare, Kannathsan K and Manoj Funde,	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0	2020
8	“Analysis of track vibration for metro rail”, In: Advances in Mechanical Engineering, Select Proceedings of ICAME 2020	Chaitanya Bhore, Atul Andhare, Pramod Padole, Mayur Korde	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0	2020
9	“Comparison of metro-track vibration with Federal Transit Administration limits”, In: Advances in Mechanical Engineering: Select Proceedings of ICAME 2020	Chaitanya Bhore, Atul Andhare and Pramod Padole	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0	2020
10	“Performance appraisal of cryogenically treated tool in dry, MQL and cryogenic machining of Inconel 718” In: Advances in Mechanical Engineering: Select Proceedings of ICAME 2020	Yogesh Deshpande, Atul Andhare, and Pramod Padole	Springer, Singapore	e Book ISBN: 978-981-15-3639-7, Hardcover ISBN: 978-981-15-3638-0	2020
11	“Design of Experiments applied to industrial process”, In: Statistical Approaches with Emphasis on Design of Experiments Applied to Chemical Processes	Neelesh Kumar Sahu and Atul Andhare	InTech Open.	978-953-51-3878-5,	2018
12	“Evaluation and improvisation of overall equipment effectiveness in a sheet metal parts manufacturing industry”, In: Operations Management and Systems Engineering, Lecture Notes in Multidisciplinary Industrial Engineering.	Abhaya Borkar and Atul Andhare	Springer, Singapore	DOI: https://doi.org/10.1007/978-981-15-6017-0_14	2015
13	“Modeling and dynamic force simulation for detection of profile error in spur gear pair”, In: Vibration Engineering and Technology of Machinery, Mechanisms and Machine Science 23,	Atul Andhare and Manish Kumar Verma	Springer International Publishing Switzerland	DOI 10.1007/978-3-319-09918-7_97	2015

Sr. No.	Patent Title	Application No.	Date	Present Staus
1	An apparatus for bedridden patients	364310	8/4 2021	Granted
2	Mechanism for transferring load horizontally and vertically and vice versa	373844	4/8/2021	Granted
3	A side tilt mechanism for bed having simultaneous operation with backrest mechanism	TEMP/E1/55580/2019MUM	18/12/2019	Granted in Jan 2026

Sr. No.	Title
1	National Conference on Condition Monitoring; NCCM2024 – 4-5 October 2024
2	38th National Convention of Mechanical Engineers NCMC2023; 8-9 September 2023
3	Industrial Problems in Machines and Mechanisms; IPROMM 2016; 22-23 December 2026
4	STTP on Condition Monitoring; March 2016
5	One week STTP on Manufaturing in the 21st Century ; July 2009
6	Two weeks STTP on Automation and Condition Monitoring; December 2008

Sr. No.	Responsibility	Institute	Role	Year
1	Head of the Department	VNIT Nagpur	As HoD of the Mechanical Engineering Department	From Jan. 2024
2	Incharge Class room Complex	VNIT Nagpur	As overall incharge to manage the class room complex	2019-2024
3	Chairman M, Tech Admission	VNIT Nagpur	Institute level Incharge for CCMT 2018	2018
4	Co-Chairman M, Tech Admission	VNIT Nagpur	Institute level Co-Incharge for CCMT 2019	2017
5	Faculty Inchage – Training and Placement	VNIT Nagpur	Overall Incharge of Training and Placement activities	2013-2014
6	Associate Dean – Training and Placement	VNIT Nagpur	Overall Incharge of Training and Placement activities	2014-2016
7	Co-Chairman M, Tech Admission	VNIT Nagpur	Institute level Co-Incharge for CCMT 2020	2013
8	Member Secretary Grievance Committee	VNIT Nagpur	As a secretary of Grievance Committee	2011-2013
9	Faculty coordinator for SAE Events	VNIT Nagpur	SAE SUPRA and BAHA events were coordinated	2008-2011
10	Hostel Warden	VNIT Nagpur	To manage hostels	2009-2011

Sr. No.	Awards
1	Best patent award in the Grand Patent and Idea Fest at Nagpur – 14 August 2023
2	Best Paper in INCRS 2018, IIITDM Jabalpur
3	Best Paper (Third Prize of Rs. 2000/) – IPRoMM 2016
4	Third Prize of Rs. 5000/- in Oratory Competition (Bhashan Shailee) on “Good Governance Day”, 24 December 2014, VNIT Nagpur.
5	Elected as Executive Council Member of Condition Monitoring Society of India

S. N.	Name of Scholar	Thesis Topic	Other Guides, If any	Status
1	Mr. Prasad V Kane	Experimental Investigations for Intelligent Fault Diagnosis of Gearbox	Nil	Awarded – Aug. 2017
2	Mr. Roja Abraham Raju	Performance Evaluation of MWCNT Based Nano fluids in Machining	Nil	Awarded Nov. 2017
3	Mr. Neelesh Kumar Sahu	Investigations on Machinability of Ti6Al4V	Nil	Awarded March 2018
4	Mr. Yogesh V. Deshpande	Optimization of Machining Parameters for Turning of Inconel 718 Using Cryogenically Treated Tools	Prof. P. M. Padole	Awarded Aug. 2018
5	Mr. Ramesh G. Pungle	Position and Path Control of AGV by Fixed Sensor and Controller	Nil	Awarded July 2018
6	Mr. Vinay Thute	Diagnosis of Bearing and Inter turn Faults in Induction Motor	Nil	Awarded Dec. 2019
7	Mr. Dhananjay Katpatal	Determination of Thermo Physical Properties of Nano Bio Lubricants and their Performance in Journal Bearing	Prof. P. M. Padole	Awarded July 2019
8	Mr. Anil M. Onkar	Design and Development of Multifunctional Bed for Bedridden Patients	Nil	Awarded Aug. 2022
9	Mr. Chaitanya Bhore	Design of effective mounting configurations for PV modules subjected to vibrations induced due to metro and winds	Prof. P. M. Padole	Awarded April 2024
10	Mr. Cheepurupalli Vasu	Investigation on Machining Characteristics of AZ91 Mg Alloy and AZ91 Mg/B4 C Metal Matrix Composites	Dr. R K Dumpala	Awarded in August 2025
11	Mr. Suhas Wankhede	Vibration analsyis and condition monitoring of Switched Reluctance Motor	Dr. P V Kane	Ongoing

S.No.	Publications
1	Ramesh Pungle, Atul Andhare , Durva Pungle, “Experimental results on position and path control of automated guided vehicle using fixed camera at ceiling and colour markers”, International Journal of Robotics and Automation , 13(4), Dec. 2024 DOI: http://doi.org/10.11591/ijra.v13i4.pp391-400
2	C H Vasu, Atul B Andhare and Ravikumar Dumpala, “Investigation on the machining characteristics of AZ91 magnesium alloy using uncoated and CVD-diamond coated WC-Co inserts”, Machining Science and Technology, 28(5), 819–835., DOI – 10.1080/10910344.2024.2397405
3	Vasu, C., Andhare, A.B., Dumpala, R., “Machinability and tool wear studies on AZ91/B4C metal matrix composites using uncoated and CVD diamond coated WC-Co turning inserts”, International Journal of Refractory Metals and Hard Materials., 2024, 119, 106538
4	Bhore, C.V., Andhare, A.B., Padole, P.M., et al, “Assessment of metro-induced vibrations on photo-voltaic modules for their solar energy degradation potential”, Solar Energy, 2023, 255, pp. 257–273.
5	Bhore, C.V., Andhare, A.B., Padole, P.M., et al., “Experimental investigation on minimizing degradation of solar energy generation for photovoltaic module by modified damping systems”, Solar Energy, 2023, 250, pp. 194–208
6	Deshpande, Y.V., Raut, S., Madankar, T.A., Andhare, A., “Influence of biodegradable coolants on machinability improvement–a review”, Advances in Materials and Processing Technologies, 2023
7	Deshpande, Y.V., Andhare, A.B., Padole, P.M., “pplication of statistical and soft computational techniques in machining of Nickel based supper-alloy using cryogenically treated tools for estimation of surface roughness”, Australian Journal of Mechanical Engineering, 2023, 21(5), pp. 1604–1623
8	Madankar, A., Dumbhare, P., Deshpande, Y.V., Andhare, A.B., Barve, P.S.,”Estimation and control of surface quality and traverse speed in abrasive water jet machining of AISI 1030 steel using different work-piece thicknesses by RSM”, Australian Journal of Mechanical Engineering, 2023, 21(2), pp. 518–525
9	Gundewar, S., Kane, P., Andhare, A.,”Detection of broken rotor bar fault in an induction motor using convolution neural network”, Journal of Advanced Mechanical Design, Systems and Manufacturing, 2022, 16(2), A2
10	Deshpande, Y.V., Zanwar, D.R., Andhare, A.B., Barve, P.S., ” Application of ANN modelling for optimisation of surface quality and kerf taper angle in abrasive water jet machining of AISI 1018 steel”, Advances in Materials and Processing Technologies, 2022, 9(3), pp. 728–741
11	Andhare, A., Onkar, A., “Human factors, ergonomic considerations and hospital bed designs: A review”, International Journal of Human Factors and Ergonomics, 2022, 9(1), pp. 47–72
12	C Vasu, AB Andhare, R Dumpala, “Multiobjective optimization of performance characteristics in turning of AZ91 Mg alloy using grey relational analysis”, Materials Today: Proceedings 42, 642-649, 2021
13	AB Andhare, AM Onkar, “Design and development of multifunctional patient bed with integrated toilet”, SN Applied Sciences 3, 1-8, 2021
14	N Kumar, AB Andhare, M Ali, ” Execution of newly developed algorithms for process parameter optimization for machining response”, Industrial Engineering Journal , 14 (04), 30-36, 2021
15	PV Kane, AB Andhare, “Critical evaluation and comparison of psychoacoustics, acoustics and vibration features for gear fault correlation and classification”, Measurement 154, 107495, 2020
16	DC Katpatal, AB Andhare, PM Padole, “Performance of nano-bio-lubricants, ISO VG46 oil and its blend with Jatropha oil in statically loaded hydrodynamic plain journal bearing”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(3), pp 386-400, 2020
17	NK Sahu, AB Andhare, “Multiobjective optimization for improving machinability of Ti-6Al-4V using RSM and advanced algorithms”, Journal of Computational Design and Engineering 6 (1), 1-12, 2019
18	Application of ANN to estimate surface roughness using cutting parameters, force, sound and vibration in turning of Inconel 718″, SN Applied Sciences 1 (1), 104, 2019
19	NK Sahu, AB Andhare, “Prediction of residual stress using RSM during turning of Ti–6Al–4V with the 3D FEM assist and experiments”, SN Applied Sciences 1, 1-14, 2019
20	DC Katpatal, AB Andhare, PM Padole, “Viscosity behaviour and thermal conductivity prediction of CuO-blend oil based nano-blended lubricant”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (8), 1154-1168, 2019
21	PV Kane, AB Andhare, “End of the Assembly Line Gearbox Fault Inspection Using Artificial Neural Network and Support Vector Machines.Critical evaluation and comparison of psychoacoustics, acoustics and vibration features for gear fault correlation and classification”, nternational Journal of Acoustics & Vibration 24 (1), 2019
22	DC Katpatal, AB Andhare, PM Padole, “Effect of CuO nanoparticles on rheological behavior of ISO VG46, Jatropha oil, and their blend”, Journal of Testing and Evaluation 47 (4), 2562-2584, 2019
23	P Dumbhare, S Dubey, Y Deshpande, A Andhare, “Modelling and multi objective optimization of surface roughness and kerf taper angle in abrasive jet machining of steel”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 259 (2018)..
24	Deshpande, Y. V., Andhare, A. B., & Padole, P. M. (2018). How cryogenic techniques help in machining of nickel alloys? A review. Machining Science and Technology, 22(4), 543–584.
25	Sahu, N. K., Andhare, A. B., & Raju, R. A. (2018). Evaluation of performance of nanofluid using multiwalled carbon nanotubes for machining of Ti–6Al–4V. Machining Science and Technology, 22(3), 476–492.
26	Deshpande, Y.V., Andhare, A.B. & Padole, P.M. Experimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718. J Braz. Soc. Mech. Sci. Eng. 40, 6 (2018)
27	Neelesh Kumar Sahu, Atul B. Andhare, Sandip Andhale and Roja Raju Abraham, “Prediction of surface roughness in turning of Ti-6Al-4V using cutting parameters, forces and tool vibration”, 2018 IOP Conf. Ser.: Mater. Sci. Eng. 346 012037
28	Deshpande, Y., Andhare, A. & Sahu, N. Estimation of surface roughness using cutting parameters, force, sound, and vibration in turning of Inconel 718. J Braz. Soc. Mech. Sci. Eng. 39, 5087–5096 (2017).
29	Raju, R. A., Andhare, A., & Sahu, N. K. (2017). Performance of multi-walled carbon nanotube-based nanofluid in turning operation. Materials and Manufacturing Processes, 32(13), 1490–1496.
30	Sahu, N.K., Andhare, A.B. Modelling and multiobjective optimization for productivity improvement in high speed milling of Ti–6Al–4V using RSM and GA. J Braz. Soc. Mech. Sci. Eng. 39, 5069–5085 (2017).
31	Katpatal, D.C., Andhare, A.B., Padole, P.M. et al. Study of dispersion stability and thermo-physical properties of CuO-Jatropha oil-based nanolubricants. J Braz. Soc. Mech. Sci. Eng. 39, 3657–3668 (2017).
32	Kane P, Andhare A. Application of psychoacoustics for gear fault diagnosis using artificial neural network. Journal of Low Frequency Noise, Vibration and Active Control. 2016;35(3):207-220.
33	Andhare, A. B., & Raju, R. A. (2016). Properties of Dispersion of Multiwalled Carbon Nanotubes as Cutting Fluid. Tribology Transactions, 59(4), 663–670.

Sr.	Publications
1	Harsh Chittor and Atul Andhare, ” Assessing the dynamic behaviour of solar PV modules in urban environments” 31st International Congress on Soaund and Vibration, Incheon, Korea, July 2025
2	G Sai Vikas Kumar Tanaya Hingwe and A. B. Andhare, “Design of foldable bus staircase for disabled people”, Second International Research Fair, Anusandhan 2.0, June 3-5, 2024 at IIT Mandi.
3	Chaitanya Bhore, Atul Andhare, Ram Gulhane and Sarthak Dalvi “Experimental determination of the best damping material for mounting solar Pv modules subjected to base vibrations”, VETOMAC 2023, IIT Roorkee, 18-20 December 2023
4	Atul Andhare, Praddyumna Durge, Atharva Deshpande, Bhavesh Kumar Sahu, “Effect of machining parameters on surface roughness, tool wear and chip morphology in the machining of Ti-6Al-4V’, First International Conference on Mechanical Engineering – Researches and Evolutionary Challenges (ICMech-REC 2023), NIT Warangal, 23-25 June 2023.
5	Chaitanya Bhore, Atul Andhare and Pramod Padole, “Design and Modelling of Shaker Table for Harmonic Response Analysis of PV Module”, International Conference on Mechanical, Automotive and Mechatronics Engineering (ICMAME 2023), 29-30 April 2023, Dubai, UAE
6	Atul Andhare and Akash Shahade, “AI and IOT Integrated Machine Environment”. International Conference on Robotics, Control, Automation, and Artificial Intelligence. RCAAI 2022 Conference 24-26 November 2022, Manipal Academy of Higher Education
7	Atul Andhare, Shankar Bharambe and Pramod Padole, “Modal Analysis of Metro Viaduct”, 16th Vibration Engineering and Technology of Machinery (VETOMAC 2021) Conference, BMS college of Engineering, Bengaluru, 16 to 18 December 2021
8	Chaitanya Bhore, Atul Andhare, Pramod Padole, Prajwal Pise, Anchit Raut and Piyush Ghui, “Design and Modelling of Shaker Table for Harmonic Response Analysis of PV Module”, 16th Vibration Engineering and Technology of Machinery (VETOMAC 2021) Conference, BMS college of Engineering, Bengaluru, 16 to 18 December 2021.
9	Atul Andhare and Vinay Thute, “Diagnosis of inter-turn and bearing faults in induction motor using wavelet coefficients and artificial neural network”, International Conference on Condition Monitoring, ICCM 2021, Jan. 21-22, 2021
10	Ch Vasu, Atul B. Andhare, Ravikumar Dumpala, Multiobjective optimization of performance characteristics in Turning of AZ91 Mg alloy using grey relational analysis. Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.11.049
11	Abhaya Borkar and Atul Andhare, “Evaluation and improvisation of overall equipment effectiveness in a sheet metal parts manufacturing industry”, 6th International Conference on Production and Industrial Engineering (CPIE-2019), Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, 8-10 June 2019.
12	Abhaya Borkar and Atul Andhare, National Conference on Modern Tools in Engineering (MTE- 2019) SATI, Vidisha, 5 April 2019
13	Neelesh Kumar Sahu, Atul B.Andhare and Abhay Khalatkar, “Tool Condition Monitoring in End Milling of Ti-6Al-4V using Multi-Sensory Approach”, Proceedings of First International and Fourth National Conference on Reliability and Safety Engineering, PDPM IIITDM Jabalpur, 26-28 February 2018.
14	Vinay Thute and Atul Andhare, Diagnosis of Inter Turn and Ball Bearing Faults in An Induction Motor using Vibration Data and Artificial Neural Network ”, Proceedings of First International and Fourth National Conference on Reliability and Safety Engineering, PDPM IIITDM Jabalpur, 26-28 February 2018.
15	Prasad Kane and Atul Andhare, “Issues of end of assembly line inspection of gearbox and approaches to address it”, ICOVP, 13th International Conference on Vibration Problems, 29 November- 2 December 2017, IIT Guwahati.
16	Neelesh Kumar Sahu, Atul B.Andhare, Sandip Andhale Roja Raju, “Prediction of surface roughness in turning of Ti-6Al-4V using cutting parameters, forces and tool vibration”, IOP Conf. Series: Materials Science and Engineering, 346 (2018) 012037 DOI:10.1088/1757-899X/346/1/012037
17	Vinay Thute and Atul Andhare, “Induction motor inter turn fault severity classification using vibration data and artificial neural network” 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 685-692.
18	Ganesh Lamdhade, Atul Andhare and Satish Chinchanikar, “Investigation of chip tool interface temperature during turning of 7075-T6 Al alloy using coated carbide tool”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 445-450.
19	Yogesh Deshpande and Atul Andhare, “Optimization of cutting parameters using cryogenically treated insert In turning of Inconel 718 using response surface methodology”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 507-514.
20	Ramesh Pungle and Atul Andhare, “Position and path control of AGV by global vision sensor”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 500-506.
21	P. V. Kane and A. B. Andhare, “Design and development of intelligent diagnostic system for end of assembly line inspection of gearbox”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 253-260.
22	Neelesh Kumar Sahu, Makarand Channe and Atul Andhare, “Multi sensor tool condition monitoring in end milling of Ti-6Al-4V”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 220-226.
23	Neelesh Kumar Sahu, and Atul Andhare, “Minimization of surface roughness for milling of Ti-6Al-4V using response surface methodology”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur, India, 22-23 December 2016, pp. 133-141.
24	Vinay Thute and Atul Andhare, “Artificial neural network application for diagnosis of inter turn and ball bearing faults in an induction motor with vibration data”, International Conference on Condition Monitoring, ICCM-2016, GITAM University, Vishakhapatnam, India, pp. 314-321, 26-27 October 2016
25	Atul Andhare, Devarsh Gupta, Govind Patel, Sidhanshu Khursange, Saiprasad Mukdadwar “Noise reduction in portable drilling machine”, International Conference on Condition Monitoring, ICCM-2016, GITAM University, Vishakhapatnam, India, pp. 81-86, 26-27 October 2016.
26	Prasad Kane and Atul Andhare, “On line intelligent multi fault diagnosis using virtual instrumentation for end of assembly line inspection for gearbox”, International Conference on Condition Monitoring, ICCM-2016, GITAM University, Vishakhapatnam, India, pp. 191-199, 26-27 October 2016.
27	Prasad Kane and Atul Andhare, “End of line quality inspection of gearbox using ANN and SVM”, Third International Conference on Industrial Engineering, ICIE-2015 and 57th National Convention of Indian Institution of Industrial Engineering, SVNIT Surat, India, 26-28 November 2015.
28	Atul Andhare and Ravi Kumar, “Condition monitoring of turning tool using Artificial Neural Network”, National Conference on Condition Monitoring, NCCM 2015, Vishakhapatnam, India, 25-26 September 2015
29	Prasad Kane and Atul Andhare, “Psychoacoustics: Evolving technique for fault diagnosis”, National Conference on Condition Monitoring, NCCM 2015, Vishakhapatnam, India, 25-26 September 2015.
30	Atul Andhare and Akash Wani, “Machine fault diagnosis using artificial neural network”, National Conference on Condition Monitoring, NCCM 2015, Vishakhapatnam, India, 25-26 September 2015.
31	Neelesh Sahu and Atul Andhare, “Optimization of surface roughness in turning of Ti-6Al-4V using Response Surface Methodology and TLBO”, ASME conference IDETC/CIE 2015, Boston, USA, August 2015.
32	Atul Andhare and Prasad Kane, Gear fault diagnosis using ANN”, International Conference on Advances in Design & Manufacturing, ICAD&M-14, NIT Trichy, 4-6 Dec. 2014, v4, 1729-1733.
33	Atul Andhare and Manish Kumar Verma., “Modeling and Dynamic Force Simulation for Detection of Profile Error in Spur Gear Pair”, Proceedings of the Tenth International Conference on Vibration Engineering and Technology of Machinery, VETOMAC – X, University of Manchester, Manchester, UK, September 2014, 1091-1100.
34	Pungle R. G., Thorat H. T. and Andhare A. B., “ Mapping Between Planes of Co-Planer Points Using Stationary Camera”, Second International Conference on Intelligent Robotics, Automation and Manufacturing, IRAM, pp. 109-117, IIT Indore, 16-18 December 2013.
35	Atul Andhare and Jithin E. V., “Analysis of Wire Vibration in Wire Electric Discharge Machining Process, Ninth International Conference on Vibration Engineering and Technology of Machinery, VETOMAC – IX, Nanjing University of Aeronautics and Astronautics, Nanjing, China, August 2013.
36	Atul Andhare, Radhika Bidwai, “Optimization of Process Parameters in Electric Discharge Machining of Al-Mg Metal Matrix Composite Reinforced by SiO2”, National Conference on Recent Advances in Manufacturing, RAM 2012, SVNIT Surat, 27-29 June 2012
37	Atul Andhare, Abrham Roja Raju , “Software for Tool and Component Cost Estimation of Blanking Tools”, National Conference on Recent Advances in Manufacturing, RAM 2012, SVNIT Surat, 27-29 June 2012
38	Atul Andhare, Tejas Lakhe, Tejas Umbarkar and Vishal Vadabhat, “Application of Neural Networks in Condition Monitoring of Ball Bearings”, Proceedings of the 15th National Conference on Machines and Mechanisms, NaCoMM 2011, IIT Madras, November 30 to December 2, 2011, pp. 283-290.
39	Atul Andhare, Anil Onkar and Pramod Padole, “Design of Bed for Bedridden Patients: Analysis and Synthesis of Mechanisms”, Proceedings of the 15th National Conference on Machines and Mechanisms, NaCoMM 2011, IIT Madras, November 30 to December 2, 2011. pp. 309-317.
40	A. B. Andhare, Piyush Wankhede, Manishkant Verma and Kuldeep Kumar, “Tool Wear Detection by Vibration in End Milling”, National Conference on Recent Advances in Manufacturing, SVNIT Surat, July 2010. pp. 16-21
41	A. B. Andhare & Anil Onkar, “Design of Bed for Bed Ridden Patients – Determination of Design Criteria”, Fourth International Conference on Advances in Mechanical Engineering, SVNIT Surat, 23-25 September 2010.
42	N. P. Maniar, A. B. Andhare, D. P. Vakharia & C. Patel, “Design & Manufacturing of 10 Operations Boring Fixture For Machining Connecting Rod on VMC (APC)”, International Conference on Total Engineering Analysis and Manufacturing Technologies, TEAM-TECH 2008, Indian Institute of Science, Bangalore, September 22-24, 2008.
43	N. P. Maniar, A. B. Andhare, D. P. Vakharia & C. Patel, “Design Of Fixture For Face Milling Of Support Plate On CNC”, National conference – AFTME – 2008, Advancements and Futuristic Trends in Mechanical Engineering” organized by Atmiy Institute of Technology & Science, Rajkot, Gujarat, India. Nov. 20, 2008.
44	N. P. Maniar, A. B. Andhare, D. P. Vakharia & C. Patel, “Experimental Method of Hydrogen Testing To Prevent Hydrogen Assisted Cracking (Hac) During Submerged Arc Welding (SAW) Process” National conference – AFTME – 2008, Advancements and Futuristic Trends in Mechanical Engineering” organized by Atmiy Institute of Technology & Science, Rajkot, Gujarat, India. Nov. 20, 2008.
45	A. B. Andhare and D. N. Manik, ”Experimental Results On Use of High Frequency Resonance Technique For Tapered Roller Bearing Diagnostics”, Proceedings of the Fourth International Conference on Vibration Engineering and Technology of Machinery, VETOMAC IV, Osmania University, Hyderabad, December 2007.
46	A. B. Andhare, “Tapered roller bearing fault diagnosis using peak ratio”, International Conference on Recent Trends in Mechanical Engineering, ICRTME-2007, Ujjian Engineering College, Ujjain, October 2007.
47	A. B. Andhare and D. N. Manik, ”Application of wavelet transform to vibration monitoring and diagnostics of rolling element bearings.” Third International Conference on Vibration Engineering and Technology of Machinery, VETOMAC III and Asia Pacific Conference on System Integrity and Maintenance, ACSIM-2004, New Delhi, December 2004.
48	A. B. Andhare and D. N. Manik, ”Vibration of taper roller bearings: A case study”, Second International Conference on Vibration Engineering and Technology of Machinery, VETOMAC II, BARC Mumbai, December 2002.

Dr. A. B. Andhare

Education

Contact

Department of Mechanical Engineering, Visvesvaraya National Institute of Technology, South Ambazari Road, Nagpur-440010