Research at Mechanical Engineering Department
| S.No | Project Title | Role of Faculty | Details of Investigators | Funding Agency (Scheme) | Fund to VNIT (In Lakhs) | Starting Year (Month) | Project Duration (In Months) | Status of the Project | Closing Year (Month) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Design, Analysis and Optimization of 15 mm Artillery Gun | PI | Dr.V.R.Kalamkar, Professor | Ministry of Defence | 24.756 | 2017 (October) | 10 | Completed | 2018 (August) |
| 2 | Performance Analysis and Optimization of recoil mechanism of 7.62 mm assault rifle | PI | Dr.V.R.Kalamkar, Professor | Ministry of Defence | 24.0787 | 2017 (October) | 10 | Completed | 2018 (August) |
| 3 | Biomechanical behaviour of Mandibular overdenture retained by one or two standard sized or mini implants: 3D Finite Element Analysis | PI | Rashmi Uddanwadiker, Professor | International Medical University, Malaysia | 1.5 | 2017 (July) | 12 | Completed | 2018 (April) |
| 4 | Application of rate, state, temperature and pore pressure friction (RSTPF) model for rock slope stability and failure hazard assessment | PI | Dr.Arun Singh, Associate Professor | NRDMS-DST | 13.5 | 2017 (March) | 24 | Ongoing | 2019 (February) |
| 5 | Online Monitoring and Characterization of Distortion in Multi Layer Laser Cladding Process | PI | Dr. T V K Gupta, Associate Professor | DST-ECR | 37.19 | 2017 (April) | 36 | Ongoing | 2020 (March) |
| 6 | Development of Fluid – Structure Interaction (FSI) Solver for Cardiovascular Disease: An Aneurysm | PI | Dr.Trushar B. Gohil, Associate Professor | DST-SERB | 26.19 | 2017 (Feb) | 36 | Ongoing | 2020 (Jan) |
| 7 | Response of hemispherical sandwich shell structures subjected to projectile impact | PI | Dr. Gaurav Tiwari, Assistant Professor | SERB (DST) | 21.97 | 2017 (April) | 36 | Ongoing | 2020 (April) |
| 8 | Design and Fabrication of Thin-film Sensor for Hypersonic flows | PI | Dr.Ravik Kumar Peetala, Associate Professor | DST (ECSR) | 36 | 2017 | 36 | Ongoing | 2019 |
| 9 | Smart Foundary 2020 | PI | Dr. A. M. Kuthe, Professor | DST | 250 | 2016 | 60 | Ongoing | 2020 |
| 10 | Development of Digital Dental Restoration | PI | Rashmi Uddanwadiker, Associate Professor | Department of Science and Technology | 41.5 | 2016 (May) | 26 | Completed | 2018 (July) |
| 11 | Performance enhancement of grinding mill | PI | Dr. A. S. Dhoble,Associate ProfessorDr. M. S. Kotambkar, Associate Professor | Tyco (India) Pvt. Ltd. Nagpur | 1 | 2016 (Jan) | Ongoing | On-going | |
| 12 | Experimental and numerical study of flow and heat transfer in cross flow heat exchanger | PI | Dr. A. S. Dhoble, Associate Professor | TEQIP-II | 1.51 | 2016 (April) | On-going | On-going | |
| SMART Foundry 2020 | Co-PI | CAD-CAM Centre, Mech. Engg., VNIT, Nagpur | DST and 5 industries | 134.516 | 2016 (September) | 36 | Ongoing | 2019 (March) | |
| 13 | Development of Ni based composite coatings using electroless plating method for high temperature tribological applications | PI | Dr.Ravikumar Dumpala, Associate Professor | DST (ECRA) | 35.54 | 2016 (October) | 36 | Ongoing | 2019 (September) |
| 14 | Biomedical Engineering and Technology centre Incubation | PI | Dr. A. M. Kuthe, Professor | DST/RGSTC | 350 | 2014 | 60 | Ongoing | 2019 |
| 15 | Purchase of Sound and Vibration Analyzer | PI | Dr.A.B.Andhare, Professor | TEQIP | 45 | 2014 | 12 | Completed | 2015 |
| 16 | Fabrication of experimental setup of a solar air heater and study the effect of rib shapes on the thermal enhancement of a solar air heater | PI | Dr. A. S. Dhoble, Associate Professor | TEQIP-II | 1 | 2014 (Dec) | 17 | Completed | 2016 April |
| 17 | Mathematical Modeling of Hydraulically Operated Zero Velocity Valve | Co-PI | Dr. A.V. Vasudeo, Dr. A. S. Dhoble, Dr. A. K. Singh, Dr. M. S. Kotambkar, Dr.Tavalare | Flonix Valves Ltd., Pune | 2.5 | 2014 (Sept) | On-going | On-going | |
| 18 | SWAYATT- The Humanoid, Design, development and fabrication | PI | Dr.Shital S. Chiddarwar, Professor | COE, Combedded Systems | 10 | 2014 | 24 | Completed | 2016 |
| 19 | Mathematical modelling of zero velocity valve | Co-PI | Dr.Arun Singh, Associate Professor | Flownix Valve Pvt. Ltd., Pune | 2.5 | 2014 (Sept) | – | Ongoing | – |
| 20 | KVIC Technology Dissemination | PI | Dr.P.M.Padole, Professor | KVIC | 2013 | 12 | Completed | 2014 | |
| 21 | Estimation of human muscle characteristics | PI | Rashmi Uddanwadiker, Professor | Department of Science & Technology | 13.16 | 2013 (June) | 36 | Completed | 2016 (May) |
| 22 | Development of Robot programming by demonstration system for spray painting operation | PI | Dr.Shital S. Chiddarwar, Professor | DST | 25 | 2013 (July) | 36 | Completed | 2016 (June) |
| 23 | Development and testing of customized joint replacement implant using layered manufacturing | PI | Dr. A. M. Kuthe , Professor | RGSTC | 50.6 | 2009 | 36 | Completed | 2012 |
| 24 | Crack detection in cantilever beam using nonlinear frequency response function | Dr.Animesh Chatterjee, Professor | ARDB(Structures) | 9.34 | 2009 April | 36 | Completed | 2012 Sept | |
| 25 | Development of TRA & MRA Assembly | PI | Dr. T V K Gupta, Associate Professor | HAL-Lucknow | 2009 (July) | 4 | Completed | 2009 (Oct) | |
| 26 | Centre for Advanced Technology in Mech. Engg.- FIST Project | PI | Dr.P.M.Padole, Professor | DST | 2008 | Completed | 2014 | ||
| 27 | RLV-3 Development | Co-PI | Dr. T V K Gupta, Associate Professor | NWTF-VSSC | 2008 (July) | 18 | Completed | 2009 (Dec) | |
| 28 | Experimental Investigations on Inconel 718 using AWJM | PI | Dr. T V K Gupta, Associate Professor | VSSC | 2007 (Jan) | 3 | Completed | 2007 (Mar) | |
| 29 | Application of Advanced Engineering Techniques toProsthodontics and orthopedics | PI | Dr.P.M.Padole, Professor | MHRD | 2005 | 24 | Completed | 2007 | |
| 30 | Design & Development of Components for RLV-Version_01 | PI | Dr. T V K Gupta, Associate Professor | NWTF-VSSC | 2004 (Feb) | 24 | Completed | 2006 (Apr) | |
| 31 | Wear estimation in joints of Mechanism using ANN approach. | PI | Dr. A. M. Kuthe , Professor | Ministry of Human Resources Govt. of India. | 4 | 2003 | 42 | Completed | 2007 |
| 32 | Design &Development of Appropriate technology for ruralengineering | PI | Dr.P.M.Padole, Professor | KVIC | 2003 | 36 | Completed | 2006 | |
| 33 | Design &Development of Small scale ginnery | PI | Dr.P.M.Padole, Professor | KVIC | 2003 | 24 | Completed | 2005 | |
| 34 | Machine system performance evaluation | PI | Dr.P.M.Padole, Professor | AICTE | 1998 | 24 | Completed | 2000 | |
| 35 | Fatigue testing of Hip Prosthesis | PI | Dr.P.M.Padole, Professor | DRDO | Ongoing | ||||
| 36 | Design and Fabrication of Humanoid Robot | Co-PI | Rashmi Uddanwadiker, Professor | COE & Department of Electronics Engineering,VNIT | 10 | 12 | Completed | 2015 (April) | |
| 37 | Design and analysis of of weld joints of aerofoilin jet Blast Deflector | PI | Dr. A. S. Dhoble, Dr. R. V. taiwade | Anand Mine Tools Pvt. Ltd | |||||
| 38 | Project on capacity enhancement of pulverizer | PI | Dr. M.S. kotambkar, Dr. A.S. Dhoble | TYCO India Pvt. Ltd. | 1 | Ongoing | |||
| 39 | Metal Additive Manufacturing using Laser Cladding Process | PI | Dr. T V K Gupta (VNIT Nagpur), Dr. G S Kumar (IIT Madras), Shri Mahendiran (JNARDDC) | DST-AMT | 67.8 | 24 | Money Yet to Receive |
List of Publications in Reputed Journals
| Sr. No. | Year | Authors | Title of the Publication | Journal Name | Vol | Pg | WoS | Scopus |
|---|---|---|---|---|---|---|---|---|
| 1 | CAY (2018-19) | Deshpande, Y.V., Andhare,A.B., Padole, P.M. | How cryogenic techniques help in machining of nickel alloys? A review | Machining Science and Technology | 22 (4) | 543-584 | SCIE | Yes |
| 2 | CAY (2018-19) | Gawande V.B., Dhoble A.S.,Zodpe D.B., Mangrulkar C | A comparative analysis of thermo-hydraulic performance of a roughened solar air heater using various rib shapes | Australian Journal of Mechanical Engineering | ESCI | Yes | ||
| 3 | CAY (2018-19) | Gawande V.B., Dhoble A.S.,Zodpe D.B., Mangrulkar C | Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughness | Australian Journal of Mechanical Engineering | ESCI | Yes | ||
| 4 | CAY (2018-19) | Prasad V. Kane andAtul B. Andhare | End of the Assembly Line Gearbox Fault Inspection using Artificial Neural Network and Support Vector Machines | International Journal of Acoustics and Vibration | 24 (1) | 68-84 | SCIE | Yes |
| 5 | CAY (2018-19) | Yogesh Deshpandeand Atul Andhare | Application of advanced algorithms for enhancement in machining performance of Inconel 718 | Indian Journal of Engineering and Material Sciences | 25 | 366-376 | NO | No |
| 6 | CAY (2018-19) | Neelesh Kumar Sahu andAtul Andhare | Multiobjective Optimization for improving Machinability of Ti-6Al-4V using RSM and Advanced algorithms | Journal of Computational Design and Engineering, Manuscript Available online 10 May 2018 | 6 | ESCI | Yes | |
| 7 | CAY (2018-19) | Yogesh Deshpande,Atul Andhare and Pramod Padole | Application of ANN to estimate surface roughness using cutting parameters, force, sound and vibration in turning off Inconel 718 | SN Applied Sciences | 1-104 | NO | No | |
| 8 | CAY (2018-19) | Dhananjay Katpatal,Atul Andhare andPramod Padole | Viscosity behaviour and thermal conductivity prediction of CuO-Blend oil based nano-blended lubricants | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | SCIE | Yes | ||
| 9 | CAY (2018-19) | Yogesh Deshpande,Atul Andhare,A. S. Chatpalliwar,I.P. Keswani andA. D. Urade | The energy efficient machining of Inconel 825 using cryogenically treated tools for optimization of surface roughness | International Journal of Mechanical and Production Engineering Research and Development | 9 (special issue) | 44-50 | No | Yes |
| 10 | CAY (2018-19) | H.P. Jawale, Ankur Jaiswal | Investigation of mechanical error in four-bar mechanism under the effects of link tolerance | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 40 | 383 | SCIE | Yes |
| 11 | CAY (2018-19) | Ranjit J Singha andTrushar B Gohil | Influence of the Presence of the Lorentz Force and its Direction on the Suppression of Secondary Flow in Two Different Orifices: A Numerical Study using OpenFOAM | Journal of Applied Fluid Mechanics | 12 (3) | 751-762 | SCI | Yes |
| 12 | CAY (2018-19) | Ranjit J Singha andTrushar B Gohil | The numerical analysis on the development of Lorentz force and its directional effect on the suppression of buoyancy-driven flow and heat transfer using OpenFOAM | Computers & Fluids | 179 | 476-489 | SCI | Yes |
| 13 | CAY (2018-19) | Trushar B. Gohil,Saha, Arun K. | POD analysis of a blooming jet at a moderate Reynolds number | Journal of Flow Visualization and Image Processing | 25(3-4) | 359-382 | No | Yes |
| 14 | CAY (2018-19) | Shubham Dalvi, Snehal Bali,Divyesh Nayka, Suraj H. Kale,and Trushar B. Gohil | Numerical study of mixed convective heat transfer in a lid‐driven enclosure with rotating cylinders | Heat Transfer—Asian Research | 48(4) | 1180-1203 | No | Yes |
| 15 | CAY (2018-19) | Hemendra Patle, Mahendiran P,B. Ratna Sunil andRavikumar Dumpala | Hardness and sliding wear characteristics of AA7075-T6 surface composites reinforced with B4C and MoS2 particles | Materials Research Express | SCIE | Yes | ||
| 16 | CAY (2018-19) | Gaurav Durge, Aayush Chandak,Abhimanyu Kumar Jaiswal,Kommineni Uday Venkat Kiran,B. Ratna Sunil andRavikumar Dumpala | Effect of heat treatment on the hardness and wear characteristics of NiCrBSi laser clad deposited on AISI410 stainless steel | Materials Research Express | SCIE | Yes | ||
| 17 | CAY (2018-19) | B Vandana, P Syamala,D Sri Venugopal,S R K Imran Sk,B Venkateswarlu, M Jagannatham,Marek KolenčíkI,Ramakanth, Ravikumar Dumpala,B Ratna Sunil | Magnesium/fish bone derived hydroxyapatite composites by friction stir processing: studies on mechanical behaviour and corrosion resistance | Bulletin of Materials Science | 42 | 122 | SCIE | Yes |
| 18 | CAY (2018-19) | Uday Venkat Kiran,K., Arora, A., Ratna Sunil,B., Dumpala, R. | Sliding wear characteristics of as-deposited and heat-treated electroless Ni-P coatings against AISI E52100 steel ball | Materials Research Express | 6 | 36401 | SCIE | Yes |
| 19 | CAY (2018-19) | Patel, V., Tiwari, G.,Dumpala, R. | Effect of eccentric loading on energy absorbing circular cap and open end frusta tube structures | Vacuum | SCI | Yes | ||
| 20 | CAY (2018-19) | G. Tiwari, M.A. Iqbal,P.K. Gupta | Influence of Projectile Obliquity along with Target Span Diameter on Ballistic Response of Thin Aluminium 1100-H12 Plates | Iranian Journal of Science and Technology, Transactions of Mechanical Engineering | SCI | Yes | ||
| 21 | CAY (2018-19) | Richa Agrawal, J. Veerababu, Sunil Goyal, R. Sandhya, Rashmi Uddanwadiker, Pramod Padole,” | Estimation of Low Cycle Fatigue Response of 316 LN Stainless Steel in Presence of Notch”, | Journal of Materials Engineering and Performance. | SCI | Yes | ||
| 22 | (2017-18) | Mahesh B Mawale, Abhaykumar Kuthe, Anupama M Mawale & Sandeep W Dahake | Development of an ear cap in chronicsuppurative otitis media using additivemanufacturing and TRIZ | Journal of Engineering In Medicine | 7 | 733-738 | SCI | Yes |
| 23 | (2017-18) | Kulkarni, P., Dhoble, A., Padole, P.M. | A review of research and recent trends in analysis of composite plates | Sadhana – Academy Proceedings in Engineering Sciences | 43 (6) | 96 | SCIE | Yes |
| 24 | (2017-18) | Sane, A.U., Padole, P.M., Manjunatha, C.M., Uddanwadiker, R.V., Jhunjhunwala, P. | Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 40 (3) | 167 | SCIE | Yes |
| 25 | (2017-18) | Sane, A., Peshwe, D.R., Manjunatha, C.M., Padole, P.M., Uddanwadiker, R.V. | Evaluation of Progressive Failure of Composite T-Joint Using Mixed Mode Cohesive Zone Model | Transactions of the Indian Institute of Metals | 71 (2) | 445-451 | SCIE | Yes |
| 26 | (2017-18) | Agrawal, R., Veerababu, J., Goyal, S., Sandhya, R., Uddanwadiker, R., Padole, P. | Estimation of Low Cycle Fatigue Response of 316 LN Stainless Steel in the Presence of Notch | Journal of Materials Engineering and Performance | 27 (2) | 590-600 | SCIE | Yes |
| 27 | (2017-18) | Sane, A., Padole, P.M., Uddanwadiker, R.V. | Progressive failure evaluation of composite skin-stiffener joints using node to surface interactions and CZM | CMES – Computer Modeling in Engineering and Sciences | 115 (2) | 281-294 | SCIE | Yes |
| 28 | (2017-18) | Katpatal, D.C., Andhare, A.B., Padole, P.M., Khedkar, R.S. | Study of dispersion stability and thermo-physical properties of CuO-Jatropha oil-based nanolubricants | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 39 (9) | 3657-3668 | SCIE | Yes |
| 29 | (2017-18) | Kulkarni, P.A., Hu, W., Dhoble, A.S., Padole, P.M. | Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads | Advances in Mechanical Engineering | 9 (9) | 26-Jan | No | Yes |
| 30 | (2017-18) | Seema S Munjewar, Shashikant B Thombre, Awanikumar P Pati | Passive direct alcohol fuel cell using methanol and 2-propanol mixture as a fuel | Ionics | 11-Jan | SCIE | Yes | |
| 31 | (2017-18) | RanjanMallick, S.B. Thombre, K. P. Kothekar | An integral mathematical model of liquid feed passive DMFCs with non-isothermal effects and charge conservation phenomenon | Journal of Cleaner Production | 182 | 654-671 | SCI | Yes |
| 32 | (2017-18) | RS Shelke, SB Thombre, SR Patrikar | Status and perspectives of dyes used in dye sensitized solar cells | International Journal of Renewable Energy Resources | 3 (2) | 54-61 | No | Yes |
| 33 | (2017-18) | RK Mallick, SB Thombre | Performance of passive DMFC with expanded metal mesh current collectors | Electrochemical Acta | 243 | 299-309 | SCI | Yes |
| 34 | (2017-18) | Vikas Gohil, Y M Puri | Multi-Objective Optimization of Material Removal Rate and Surface Roughness in Electrical Discharge Turning of Titanium Alloy (Ti-6Al-4V)” | Indian Journal of Engineering & Materials Sciences. | SCIE | Yes | ||
| 35 | (2017-18) | AK Tiwari, VR Kalamkar | Effects of total head and solar radiation on the performance of solar water pumping system | Renewable Energy | 118 | 919-927 | SCIE | Yes |
| 36 | (2017-18) | Rohan R Pande, Vilas R Kalamkar & Milind Kshirsagar | Making the popular clean: improving the traditional multipot biomass cookstove in Maharashtra, India | Environment Development and Sustainability | SCIE | Yes | ||
| 37 | (2017-18) | Sanjay K Sharma, V. R. Kalamkar | Numerical Investigation of Convective Heat Transfer and Friction in Solar Air Heater with Thin Ribs | Computer Modeling in Engineering and Science | 114 (3) | 295-319 | SCIE | Yes |
| 38 | (2017-18) | Nitnaware P.T. and Suryawanshi J.G. | Effects of Exhaust Gas Recirculation on Performanceand Emission Characteristic of SI Engine using Hydrogen and CNG Blends | Journal of institute of engineers india Series C | No | Yes | ||
| 39 | (2017-18) | Girish Bhiogade and J.G. Suryawanshi | Effect of external mixture formation and EGR Techniques on diesel fuelled PCCI engine | Journal of institute of engineers India Series C | No | Yes | ||
| 40 | (2017-18) | Roja Abraham Raju, Atul Andhare and Neelesh Kumar Sahu | Performance of multi-walled carbon nano tube based nano fluid in turning operation | Materials and Manufacturing Processes | 32 (13) | 1490-1496 | SCIE | Yes |
| 41 | (2017-18) | Dhananjay Katpatal, Atul Andhare, Pramod Padole and Rohit Khedkar | Study of Dispersion Stability and Thermophysical Properties of CuO- Jatropha Oil Based Nanolubricants | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 39 (9) | 3657-3668 | SCIE | Yes |
| 42 | (2017-18) | Neelesh Kumar Sahu and Atul Andhare | Modelling and multi objective optimization for productivity improvement in high speed milling of Ti6Al4V using RSM and GA | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 39 (12) | 5069 – 5085 | SCIE | Yes |
| 43 | (2017-18) | Neelesh Kumar Sahu and Atul Andhare | Evaluation of performance of nano fluid using multi walled carbon nano tubes for machining of Ti-6Al-4V | Machining Science and Technology | SCIE | Yes | ||
| 44 | (2017-18) | Yogesh Deshpande, Atul Andhare and Pramod Padole | How Cryogenic Techniques Help in Machining of Nickel Alloys? A Review | Machining Science and Technology | SCIE | Yes | ||
| 45 | (2017-18) | Yogesh Deshpande, Atul Andhare and Pramod Padole | Experimental results on the performance of cryogenic treatment of tool and minimum quantity lubrication for machinability improvement in the turning of Inconel 718 | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 40 (6) | SCIE | Yes | |
| 46 | (2017-18) | Dhananjay Katpatal, Atul Andhare and Pramod Padole | Effect of CuO Nanoparticles on Rheological Behaviour of ISO VG46, Jatropha Oil and their blend | Journal of Testing and Evaluation | 47 (4) | SCI | Yes | |
| 47 | (2017-18) | Parikshit Dumbhare, Shikha Dubey, Yogesh Deshpande, Atul Andhare and P. S. Barve | Modelling and multi objective optimization of surface roughness and kerf taper angle in abrasive jet machining of steel | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 40 (5) | SCIE | Yes | |
| 48 | (2017-18) | Tushar M. Sathe⁎, A.S. Dhoble | A review on recent advancements in photovoltaic thermal techniques | Renewable and Sustainable Energy Reviews | 76 | 645-672 | SCI | Yes |
| 49 | (2017-18) | Amol Wadhawan, A.S. Dhoble, V.B. Gawande | Analysis of the effects of use of thermal energystorage device (TESD) in solar air heater | Alexandria Engineering Journal | ESCI | |||
| 50 | (2017-18) | P. A. Kulkarni, A. S. Dhoble, P. M. Padole | Statistical wind prediction and fatique analysis for HAWT composite material blade under dynamic loads | Advances in Mechanical Engineering | 9 | 26-Jan | SCIE | Yes |
| 51 | (2017-18) | Sandeep Joshi, A. S. Dhoble | Use of silicone oil and coconut oil as liquid spectrum filters for BSPVT systems: with emphasis on degradation of liquids by sunlight | Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation | SCI | Yes | ||
| 52 | (2017-18) | Jagesvar Verma, R V Taiwade, S G Sapate, A P Patil, A S Dhoble | Evaluation of Microstructure, Mechanical properties and corrosion resistance of friction stir-welded aluminium and Magnesium dissimilar alloys | Journal of Material Engineering and Performance | SCIE | Yes | ||
| 53 | (2017-18) | Joshi, S.S., Dhoble, A.S., Sathe, T., Mangrulkar, C. | Performance Analysis of Photovoltaic Thermal System Using Silicone Oil Spectrum Filter | Applied Solar Energy | NO | |||
| 54 | (2017-18) | Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Fale, S.G. | Thermal performance evaluation of solar air heater using combined square and equilateral triangular rib roughness | Australian Journal of Mechanical Engineering | ||||
| 55 | (2017-18) | Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Fale, S.G. | A comparative analysis of thermo-hydraulic performance of a roughened solar air heater using various rib shapes | Australian Journal of Mechanical Engineering | ||||
| 56 | (2017-18) | Kulkarni, P.A., Dhoble, A.S., Padole, P.M. | Deep neural network-based wind speed forecasting and fatigue analysis of a large composite wind turbine blade | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | SCIE | |||
| 57 | (2017-18) | Joshi, S.S., Dhoble, A.S. | Use of Silicone Oil and Coconut Oil as Liquid Spectrum Filters for BSPVT: With Emphasis on Degradation of Liquids by Sunlight | Journal of Solar Energy Engineering, Transactions of the ASME | SCI | |||
| 58 | (2017-18) | Kulkarni, P., Dhoble, A., Padole, P.M. | A review of research and recent trends in analysis of composite plates | Sadhana – Academy Proceedings in Engineering Sciences | SCI | |||
| 59 | (2017-18) | Sathe, T.M., Dhoble, A.S. | Thermal management of low concentrated photovoltaic systems using extended surfaces in phase change materials | Journal of Renewable and Sustainable Energy | SCI | |||
| 60 | (2017-18) | Joshi, S.S., Dhoble, A.S. | Analytical approach for performance estimation of BSPVT system with liquid spectrum filters | Energy | SCI | |||
| 61 | (2017-18) | Joshi, S.S., Dhoble, A.S | Photovoltaic -Thermal systems (PVT): Technology review and future trends | Renewable and Sustainable Energy Reviews | SCI | |||
| 62 | (2017-18) | Veer Alakshendra, Shital S. Chiddarwar | Simultaneous balancing and Trajectory tracking control for an omnidirectional mobile robot with a cylinder using switching between two robust controllers | SAGE International Journal of Advanced Robotic Systems | 14(6) | 16-Jan | SCIE | Yes |
| 63 | (2017-18) | Sahoo, S. R., Chiddarwar S.S., Veer Alekshendra | Intuitive dynamic modelling and flatness based non-linear control of mobile robot | SAGE Journal of Simulation: Transactions of the Society for Modeling and Simulation International | SCIE | Yes | ||
| 64 | (2017-18) | Khandekar, P.M., Chiddarwar S.S., and Jha, A., | Programming of an Industrial Robot Using Demonstrations and Soft Computing Techniques | Journal of Scientific and Industrial Research | 77(3) | 156-163 | SCIE | Yes |
| 65 | (2017-18) | Ankur Jaiswal, H.P. Jawale | Comparative study of four-bar hyperbolic function generation mechanism with four and five accuracy points | Archive of Applied Mechanics (Springer) | 87 | 2037-2054 | SCI | Yes |
| 66 | (2017-18) | Mangesh S. Kotambkar | Modal analysis of mistuned turbine blade packet due to combined blade and lacing wire damage | International Journal of Acoustics and Vibration | SCIE | |||
| 67 | (2017-18) | P.V. Kane and A.B. Andhare | End of the Assembly Line Gearbox fault inspection using Artificial Neural Network & Support Vector Machines | International Journal of Acoustics and Vibration | 24 (1) | 68-84 | SCIE | Yes |
| 68 | (2017-18) | Lautre, N.K.,Sharma, A.K.,Pradeep, K.,Das, S. | Experimental Evaluation of a Microwave Drilling Process in Perspex | Journal of Testing and Evaluation | 48(4) | IN press | SCI | Yes |
| 69 | (2017-18) | A. A. Thakre and A. K. Singh | Frictional study of the soft and hard solid interface using Response surface methodology | Journal of Tribology (ASME) | 140(4) | 41601 | SCIE | Yes |
| 70 | (2017-18) | A. A. Thakre and A. K. Singh | Determination of work of adhesion of gelatin hydrogels on a glass substrate | Materials Research Express | 2053-1591 | SCIE | Yes | |
| 71 | (2017-18) | A. A. Thakre and A. K. Singh | Energy release rate of gelatin hydrogels on glass surface in direct shear sliding experiments | Journal of Adhesion Science and Technology | 32(17) | 1899-1910 | SCI | Yes |
| 72 | (2017-18) | A.A. Thakre and A.K. Singh | An experimental study on stick-slip of gelatin hydrogels using fracture mechanics | Materials Research Express | 5 (8) | SCIE | Yes | |
| 73 | (2017-18) | A.A. Thakre and A.K. Singh | Specimen thickness dependency of energy release tate of a gelatine hydrogel and glass substrate interface | Journal of Tribology (ASME) | SCI | Yes | ||
| 74 | (2017-18) | N. Sinha, A.K. Singh and T.N. Singh | Dynamic Stability of the Rate, State, Temprature, and Pore Pressure Friction Model at a Rock Interface | Pure and Applied Geophysics | 1420-9136 | SCI | Yes | |
| 75 | (2017-18) | N. Sinha, A.K. Singh and T.N. Singh | The effect of inertia, viscous damping, temperature and normal stress on chaotic behavior of the rate and state friction model | Journal of Earth System Science | – | – | SCIE | Yes |
| 76 | (2017-18) | V. Gupta and A.K. Singh | Stress relaxation at a gelatin hydrogel-glass interface in direct shear sliding | Modern Physics Letters B | 31 | 1750345-1-14 | SCI | Yes |
| 77 | (2017-18) | Gondane, S., A.K. Singh, Vijayakumar, R.P. and Sinha, N. | The Effect of Carbon Nanotubes Based Nanolubricant on Stick–Slip Behavior | Transactions of the Indian Institute of Metals | SCIE | Yes | ||
| 78 | (2017-18) | Hemendra Patle, Ravikumar Dumpala, B. Ratna Sunil | Machining Characteristics and Corrosion Behavior of Grain Refined AZ91 Mg Alloy Produced by Friction Stir Processing: Role of Tool Pin Profile | Transactions of the Indian Institute of Metals | 71 (4) | 951–959 | SCIE | Yes |
| 79 | (2017-18) | Swetha Chowdary, Ravikumar Dumpala, Anand Kumar, Kondaiah V, Ratna Sunil | Influence of heat treatment on the machinability and corrosion behavior of AZ91 Mg alloy | Journal of Magnesium and Alloys | 6 (1) | 52-58 | SCIE | Yes |
| 80 | (2017-18) | N. Saikrishna, G. Pradeep Kumar Reddy, Balakrishnan Munirathinam, Ravikumar Dumpala, M. Jagannatham, B. Ratna Sunil | An investigation on the hardness and corrosion behavior of MWCNT/Mg composites and grain refined Mg | Journal of Magnesium and Alloys | 6 (1) | 83-89 | SCIE | Yes |
| 81 | (2017-18) | B. Lakshmana Prasad, G. Neelaiah, M. Gopi Krishna, S.V.V. Ramana, K.Sai Prakash, G. Sarika, G. Pradeep Kumar Reddy, Ravikumar Dumpala, B. Ratna Sunil | Joining of AZ91 Mg alloy and Al6063 alloy sheets by friction stir welding | Journal of Magnesium and Alloys | 6 (1) | 71-76 | SCIE | Yes |
| 82 | (2017-18) | G. Tiwari, Tiju Thomas, R. P. Khandelwal | Influence of reinforcement in the honeycomb structures under axial compressive load | Thin walled structure | 126 | 238-245 | SCI | Yes |
| 83 | (2017-18) | G. Tiwari, M.A. Iqbal,P.K. Gupta | Energy absorption characteristics of thin aluminium plate against hemispherical nosed projectile impact | Thin walled structure | 126 | 246-257 | SCI | Yes |
| 84 | (2017-18) | G. Tiwari, M.A. Iqbal,P.K. Gupta | Impact response of thin aluminum plates and hemispherical shells | International Journal of Crashworthiness | 24 (4) | 413-428 | SCI | Yes |
| 85 | (2017-18) | Tiju Thomas, G. Tiwari | Crushing behavior of honeycomb structure-A Review | International Journal of Crashworthiness | SCI | Yes | ||
| 86 | (2017-18) | Sane, A. U., Padole, P. M., Manjunatha, C. M., Uddanwadiker, R. V., & Jhunjhunwala, P. | Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load. | Journal of the Brazilian Society of Mechanical Sciences and Engineering, | 40 (3) | 167 | SCIE | Yes |
| 87 | (2017-18) | Sane, A., Padole, P. M., Uddanwadiker, R. V. | Progressive failure evaluation of composite skin-stiffener joints using node to surface interactions and CZM. | Computer Modeling in Engineering & Sciences (CMES) accepted | SCI | Yes | ||
| 88 | (2017-18) | Sane, A., Peshwe, D. R., Manjunatha, C. M., Padole, P. M., & Uddanwadiker, R. V. | Evaluation of Progressive Failure of Composite T-Joint Using Mixed Mode Cohesive Zone Model. | Transactions of the Indian Institute of Metals | 71(2) | 445-451 | SCI | Yes |
| 89 | (2017-18) | Sanjay B. Ingole and Animesh Chatterjee | Joint stiffness identification: A three-parameter joint model of cantilever beam | International Journal of Acoustics and Vibrations | SCI | Yes | ||
| 90 | (2017-18) | T. Vaidya, Animesh Chatterjee | Vibration of road bridges under moving vehicles: A comparative study between single contact point and two contact point models | Transactions of the Canadian Society for Mechanical Engineering | ||||
| 91 | CAYm2 (2016-17) | Sapkal Pranav, Shraddha Jaiswal, Abhaykumar Kuthe. | Rapid Prototyping Assisted Scaffold Fabrication for Bone TissueRegeneration | Journal of Materials Science and Research | 5 | 79-95 | No | No |
| 92 | CAYm2 (2016-17) | Sandeep Dahake, Abhaykumar Kuthe, Mahesh Mawale | Applications of medical rapid prototyping (MRP) assisted customized surgical guides (CSG) in complex surgeries | Rapid prototyping journal, Emerald. | 22 | SCIE | Yes | |
| 93 | CAYm2 (2016-17) | Pranav S. Sapkal, AbhaykumarM. Kuthe, Rajpal S. Kashyap, AmitR. Nayak, Sudhanshu A. Kuthe & AnujaP. Kawle | Indirect casting of patient-speciic tricalcium phosphate zirconiascafolds for bone tissue regeneration using rapid prototypingmethodology | Journal of Porous Materials | 11-Jan | SCI | Yes | |
| 94 | CAYm2 (2016-17) | K. P. Kothekar, S.B. Thombre, RanjanMallick | Estimation of Kinetic and electric parameters of liquid feed passive DMFCs | International Journal of Hydrogen energy | 42 (38) | 24358-24371 | SCI | Yes |
| 95 | CAYm2 (2016-17) | HS Deshmukh, SB Thombre | Solar distillation with single basin solar still using sensible heat storage materials | Desalination | 410 | 91-98 | SCI | Yes |
| 96 | CAYm2 (2016-17) | Seema S Munjewar, Shashikant B Thombre, Ranjan K Mallick | Approaches to overcome the barrier issues of passive direct methanol fuel cell–Review | Renewable and Sustainable Energy Reviews | 67 | 1087-1104 | SCI | Yes |
| 97 | CAYm2 (2016-17) | Seema S Munjewar, Shashikant B Thombre, Ranjan K Mallick | A comprehensive review on recent material development of passive direct methanol fuel cell | Ionics | 23 | 18-Jan | Yes | |
| 98 | CAYm2 (2016-17) | Bhele S.K., Thombre S.B., Deshpande N.V. | Investigation of the spray and flame structure Characteristics of Jatropha Biodiesel using simplex air blast atomizer | Journal of basic and applied research International | 19 (2) | 118-127 | Yes | |
| 99 | CAYm2 (2016-17) | Bhele S.K., Thombre S.B., Deshpande N.V. | Experimental Investigations on Combustion Characteristics of Jatropha Biodiesel (JME) and its diesel blends for tubular combustor application | Advances in Automobile Engineering | No | |||
| 100 | CAYm2 (2016-17) | Ranjan K Mallick, Shashikant B Thombre, Ramani V Motghare, Rakesh R Chillawar | Analysis of the clamping effects on the passive direct methanol fuel cell performance using electrochemical impedance spectroscopy | Electrochemical Acta | 215 | 150–161 | SCI | Yes |
| 101 | CAYm2 (2016-17) | Ingole, S.B., Chatterjee, A. | Joint stiffness identification: A three-parameter joint model of cantilever beam | Journal of Acoustics and Vibrations | 13-Mar | SCI | Yes | |
| 102 | CAYm2 (2016-17) | Tanuja Vaidya and Animesh Chatterjee | A comparative study between single contact point and two contact point models | Transactions of the Canadian Society for Mechanical Engineering | 41 | 99-111 | SCI | Yes |
| 103 | CAYm2 (2016-17) | Animesh Chatterjee, M S Kotambkar | Modeling and investigation of modal properties under crack induced mistuning in a turbine blade packet | Advances in Vibration Engineering (Current: Journal of Vibration Engineering and Technologies) | 16(4) | 335 348 | SCIE | Yes |
| 104 | CAYm2 (2016-17) | D B Meshram, Y M Puri | Review of research work in die sinking EDM for machining curved hole | Journal of the Brazilian society of Mechanical Sciences and Engineering | 39,(7) | 2593–2605 | SCIE | Yes |
| 105 | CAYm2 (2016-17) | Vikas Gohil, Y M Puri | Statistical Analysis of material removal rate and Surface roughness in Electrical Discharge Turning of titanium Ti-6Al-4V alloy | Journal of Engineering Manufacture Part B | SCI | No | ||
| 106 | CAYm2 (2016-17) | Vikas Gohil, Y M Puri | Experimental investigation of surface roughness in electrical discharge turning of Ti-6Al-4V alloy | Transactions of FAMENA | 40 (4) | 10-Jan | SCIE | No |
| 107 | CAYm2 (2016-17) | Milind P. Kshirsagar, V. R. Kalamkar | User-centric approach for the design and sizing of natural convection biomass cookstoves for lower emissions | Energy | 115 | 1202-1215 | SCI | Yes |
| 108 | CAYm2 (2016-17) | S.K. Sharma, V. R. Kalamkar | Experimental and numerical investigation of forced convective heat transfer in solar air heater with thin ribs | Solar Energy | 147 | 277-291 | SCIE | Yes |
| 109 | CAYm2 (2016-17) | PV Kane and AB Andhare | Application of psychoacoustics for gear fault diagnosis using artificial neural network | Journal of Low Frequency Noise, Vibration and Active Control | 35(3) | 207-220 | SCI | Yes |
| 110 | CAYm2 (2016-17) | Yogesh Deshpande, Atul Andhare and Neelesh Kumar Sahu | Estimation of surface roughness using cutting parameters, force, sound and vibration in turning of Inconel 718 | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 39 (12) | 5087 – 5096 | SCIE | Yes |
| 111 | CAYm2 (2016-17) | Abhishek M. Thote, Rashmi V. Uddanwadiker, Krishna Sharma and Sunita Shrivastava | Optimum pure intrusion of a mandibular canine with the segmented arch in lingual orthodontics | Biomedical materials and engineering | 28 | 247-256 | SCIE | Yes |
| 112 | CAYm2 (2016-17) | Abhishek M. Thote, Rashmi V. Uddanwadiker, Krishna Sharma and Sunita Shrivastava | Pure intrusion of a mandibular canine with segmented arch in lingual orthodontics: A numerical study with 3-dimensional finite element analysis | Biocybernetics and Biomedical Engineering | 37 | 590-598 | SCIE | Yes |
| 113 | CAYm2 (2016-17) | Gawande, V.B., Dhoble, A.S., Zodpe, D.B., Chamoli, S. | Analytical approach for evaluation of thermo hydraulic performance of roughened solar air heater | Case Studies in Thermal Engineering | 8 | 19-31 | ESCI | Yes |
| 114 | CAYm2 (2016-17) | C. K. Mangrulkar, A. S. Dhoble, A. R. Deshmukh, S. A. Mandavgane | Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow | Applied Thermal Engineering | 110 | 521-538 | SCIE | Yes |
| 115 | CAYm2 (2016-17) | C. K. Mangrulkar, A. S. Dhoble, S. G. Chakrabarty, U. S. Wankhede | Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plate | International Journal of Heat and Mass Transfer | 104 | 964-978 | SCI | Yes |
| 116 | CAYm2 (2016-17) | R.M. Dhoble, P. Reddy Maddigapu, Sadhana S. Rayalu,A.G. Bhole,Ashwinkumar S. Dhoble, Shubham R. Dhoble | Removal of arsenic(III) from water by magnetic binary oxide particles(MBOP): Experimental studies on fixed bed column | Journal of Hazardous Materials | 322 | 469-478 | SCI | Yes |
| 117 | CAYm2 (2016-17) | C. K. Mangrulkar, V. M. Kriplani, A. S. Dhoble | Experimental Investigation Of Convective Heat Transfer Enhancement Using Alumina/Water And Copper Oxide/Water Nanofluids | Thermal Science | 20 | 1681-1692 | SCIE | |
| 118 | CAYm2 (2016-17) | Abhishek Jha, Shital S. Chiddarwar, Veer Alakshendra, Mayur Andulkar | Kinematics‑based approach for robot programming via human arm motion | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 39(7) | 2659-2675 | SCIE | Yes |
| 119 | CAYm2 (2016-17) | Veer Alakshendra, Shital S. Chiddarwar | Adaptive robust control of Mecanum-wheeled mobile robot with uncertainties | Nonlinear Dynamics | 87(4) | 2147-2169 | SCI | Yes |
| 120 | CAYm2 (2016-17) | Abhishek Jha, Shital S. Chiddarwar | Robot Programming by Demonstration using Teleoperation through Imitation | Emerald Journal of Industrial Robot | 44(2) | 142-154 | SCIE | Yes |
| 121 | CAYm2 (2016-17) | Mangesh S. Kotambkar, Animesh Chatterjee | Modeling and investigation of modal properties under crack induced mistuning in a turbine blade packet | Journal of Vibration Engineering and Technologies | 4(4) | 335-348 | SCIE | Yes |
| 122 | CAYm2 (2016-17) | Avinash A Thakre, Shashank Soni | Modeling of burr size in drilling of aluminum silicon carbide composites using response surface methodology | Engineering Science and Technology, an International Journal | 19 | 1199-1205 | No | No |
| 123 | CAYm2 (2016-17) | Avinash A Thakre, Ananta Shinde, Ganesh Mundhe | Improvement in Boundary Lubrication Characteristics of SAE20W40 Oil Using Aluminum Oxide Nanoparticles | Journal of Tribology | 138 | 34501 | SCI | Yes |
| 124 | CAYm2 (2016-17) | Vinit Gupta, Arun K. Singh | Scaling laws of gelatin hydrogels for steady dynamic friction | International Journal of Modern Physics B | 30 | 1650198 | SCI | Yes |
| 125 | CAYm2 (2016-17) | Sandeep Nandgaonkar, T V K Gupta, Suhas S Joshi | Effect of Water Oil Mist Spray (WOMS) Cooling on Drilling of Ti6Al4V Alloy Using Ester Oil Based Cutting Fluid | Procedia Manufacturing | 6 | 71-79 | No | Yes |
| 126 | CAYm2 (2016-17) | Nikhil Bauskar, Rahul A Mali, T V K Gupta | FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718 | Atlantis Press: 2nd International Conference on Communicationand Signal Processing (ICCASP 2016) | 137 | 206-211 | No | Yes |
| 127 | CAYm2 (2016-17) | G. V. V Surya Kiran, K. Hari Krishna, Sk. Sameer, M. Bhargavi, B. Santosh Kumar, G. Mohana Rao, Y. Naidubabu, Ravikumar Dumpala, B. Ratna Sunil | Machining characteristics of fine grained AZ91 Mg alloy processed by friction stir processing | Transactions of Nonferrous Metals Society of China | 27 (4) | 804–811 | SCI | Yes |
| 128 | CAYm2 (2016-17) | Pravin Sawarkar,T.Sundararajan and K.Srinivasan | Effects of externally applied pulsations on LPG flames at low and high fuel flow rates | Applied Thermal Engineering | 111 | 1664-1673 | SCI | Yes |
| 129 | CAYm2 (2016-17) | K.M. Pandey, S. Roga and G. Choubey | Numerical Investigation on Hydrogen-Fueled Scramjet Combustor with Parallel Strut Fuel Injector at a Flight Mach Number of 6 | Journal of Applied Fluid Mechanics | 9 | 1215-1220 | SCI | Yes |
| 130 | CAYm2 (2016-17) | Girish Bhiogade and J.G. Suryawanshi | Investigations on premixed charge compression ignition engine with external mixture formation and exhaust gas recirculation technique | Journal of Mechanical Science and Technology (Springer) | 30 | 5269 – 5274 | SCIE | Yes |
| 131 | CAYm2 (2016-17) | S.P.Chincholkar and J. G. Suryawanshi | Gasoline Direct Injection: An Efficient Technology | Energy Procedia (Elsevier) | 90 | 666 – 672 | No | Yes |
| 132 | CAYm2 (2016-17) | Animesh Chatterjee | Sensitivity and Error Analysis of a Coupled Micro-Resonator Array for Ultra-Sensitive Mass Detection Using Matrix Perturbation Theory | IEEE Sensors Journal | SCI | Yes | ||
| 133 | CAYm2 (2016-17) | Animesh Chatterjee | Lumped parameter modelling of turbine blade packets for analysis of modal characteristics and identification of damage induced mistuning | Applied Mathematical Modelling | SCI | Yes |
| Acadmic Year | S.No. | Title of the Invention | Inventors | Status | Patent Number | Filing Date | Filed In |
|---|---|---|---|---|---|---|---|
| Filed | |||||||
| 2016-2017 | 1 | SIMULTANEOUS BALANCING ANDTRAJECTORY TRACKING CONTROL FOR AMOBILE ROBOT WITH A NON- PLANAR OBJECT | Veer Alakshendra, Shital Chiddarwar | Filed | 201721028549 | 09-08-2017 | India |
| 2016-2017 | 2 | ROBOTIC SYSTEM FOR DE- BURRINGWORK-PIECES | Rohini Bhute, Shital Chiddarwar, Abhishek Jha, VeerAlakshendra, Saumya Ranjan Sahoo | Filed | 201721026348 | 25-07-2017 | India |
| 2016-2017 | 3 | Hybrid Robot | Chiddarwar Shital Sudhakar, Khanna Parag, SINGH AKASH, THAKKER ROHAN ASHWIN, KAMAT AJINKYA RAM , KHUSHDEEP SINGH MANN,PAIGWAR ANSHUL, KUMAR SUDHIR | Filed | 201721020615 | 13-06-2017 | India |
| 2016-2017 | 4 | Humanoid Robot | KOTHARI ASHWIN, BHURCHANDI KISHOR, AGRAWAL SAPAN SANTOSH, SINGH AKASH, GADWE ANIKET ASHOK, PAIGWAR ANSHUL KAMAL, KAMAT AJINKYA RAM, SAROYA MANISH RAJESH, PUSALKAR NEHA, PATATH KARTIK, PRASAD BANDAPPA VAGDARGI, SARAF RADHA, THAKKER ROHAN ASHWIN, KAKDE SAKSHI, ADDEPALLI SHALINI, VERMA SURABHI,CHIDDARWAR SHITAL | Filed | 201721015920 | 05-05-2017 | India |
| 2016-2017 | 5 | Robotic Cleaning System for Internal Cleaning of a Unit | Chiddarwar Shital Sudhakar, Hattarge Swapnil Sudarshan, Shahu Pravin, Kapgate Sachin Damodar, Agrawal Sapan Santosh, Patath Kartik | Filed | 201621043891 | 22-12-2016 | India |
| 2016-2017 | 6 | 3D Printed Artificial Temporal Bone andprocess of making the same | Rashmi Uddanwadiker | Filed | 201621041387 | 2016 | India |
| 2015-2016 | 7 | Feeding Bottle for Cleft Palate Babies | Rashmi Uddanwadiker, Sukhada Joshi, Jugal Shah | Filed | 201621011518 | 31-03-2016 | India |
| 2015-2016 | 8 | Rib design for thermal performance enhancement in roughened solar air heater | V.B.Gawande, A.S.Dhoble, D.B.Zodpe | Filed | Filed on 24th June 2016 | 24-06-16 | Indian |
| 2013-2014 | 9 | Device to restrict the unwanted reverse motion of vehicles | Mangesh S. Kotambkar, Ajinkya s. Khade, Yash V. Borghate | Filed | 23-04-2014 | ||
| Published | |||||||
| 2016-2017 | 10 | Method for Manufacturing of Thin PorousMetal Membrane using EDM and WEDM | Dr. Y M Puri | Published | 201621028405 (application no.) | 20-08-2016 | India |