Ongoing
Sr. No	Details
1	Analysis, Design and Implementation of Intelligent Reflecting Surfaces (IRS) Assisted Wireless Communication Systems, Ministry of Electronics & Information Technology (MeitY), 56.80 lakhs, P. K. Sharma, K. M. Bhurchandi, A. K. Srivastav
2	To develop Biocompatible materials with a wide supercooled liquid region in Bulk Metallic Glass systems, SERB, 79.95 lakhs, J. G. Bhatt, A. K. Srivastav
3	Evolution of Ductility of Bulk Amorphous Alloys Zr Based Subjected to Severe Plastic Deformation and other treatments, DST, International Bilateral Cooperation division, 10.43 lakhs, J. G. Bhatt, Dmitry Gunderov (Russia)
4	Metal Additive Manufacturing using Laser Cladding, DST, 54 lakhs, T. V. K. Gupta, J. G. Bhatt
5	Development of process and establishment of parameters for producing parts by permanent joining (welding) of Metal Additively Manufactured Aluminium alloy and conventionally manufactured parts/components of Aluminium alloy for current and futuristic applications in armament, DRDO, 42 lakhs, PI: Vijay Hiwarkar (DIAT, Pune), Co-PI: R. K. Khatirkar (VNIT)
6	Investigations on the influence of laser annealing towards improving fatigue life of Ni Ti/PI bimorph for thin film micro-actuator development, TEQIP Collaborative Research Scheme (NPIU), 3.19 lakhs, R. V. Taiwade
Completed
Sr. No	Details
1	Effect of coating thickness on slurry erosion resistance of thermal spray coatings to be used in components of naval and energy systems, NRB, 34.43 lakhs, S. G. Sapate, R. C. Rathod
2	Assessment of weld interface creep cavitation of Ferritic / austenitic dissimilar weld joint of ferritic modified 9Cr-1Mo and austenitic 316LN steels, UGC-DAE-CSR, 18 lakhs, A. R. Ballal, M. M. Thawre
3	Generation of High Diagram for alloy617M for the Indian Advanced Ultra Supercritical Power Plant, AUSC Mission Directorate, 414.14 lakhs, M. M. Thawre, A. R. Ballal, D. R. Peshwe, P. M. Padole
4	Generation of Creep Data of the Indian Advanced Ultra Supercritical Power Plant Materials, AUSC Mission Directorate, 618.97 lakhs, D. R. Peshwe, A. R. Ballal, M. M. Thawre
5	Round Robin Testing for Generation of Low Cycle Fatigue Data of the Indian Advanced Ultra Supercritical Power Plant Materials, AUSC Mission Directorate, 581 lakhs, A. R. Ballal, M. M. Thawre, D. R. Peshwe
6	Large scale synthesis of WO3-x nanowires for chemiresistive gas sensors, SERB, 34.67 lakhs, A. K. Srivastav
7	Structural developments during deformation and annealing in titanium alloys, SERB (DST), 19.36 lakhs, R. K. Khatirkar
8	Design and Analysis on weld joints of Aerofoil in jet blast defector, Anand Mines ToolsPvt. Ltd. Nagpur, 4.08 lakhs, R. V. Taiwade, A. S. Dhoble
9	Developing downstream applications of strip cast Al alloys, Ministry of Mines and NALCO, 31 lakhs, R. K. Khatirkar, S. G. Sapate
10	Testing for Damage Evaluation of New Composite Materials & Components, ACECOST- III (AR & DB), 167.3 lakhs, D. R. Peshwe, J. G. Bhatt, M. M. Thawre
11	Rheological study of Hydroxyl terminated poly butadiene (HTPB) – Aluminium nano particles (ANP) – Ammonium perchlorate (AP) Composite suspension, CARS, 10 lakhs, K. L. Wasewar, D. R. Peshwe
12	Endurance studies of Hip prosthesis, CARS, 10 lakhs, P. M. Padole, D. R. Peshwe, M. M. Thawre
13	Effect of texture on LCF behaviour of Ti-64 Turbine Blade material, CARS (GTRE), 10 lakhs, A. R. Ballal, D. R. Peshwe
14	A study of micro-texture and texture evolution in 2205 duplex stainless steel during deformation and recrystallization, UGC Networking Resource Centre, 0.5 lakhs, R. K. Khatirkar
15	Dissimilar welding behaviour of stainless steels using conventional and un-conventional processes, TEQIP-II, 0.55 lakhs, R. V. Taiwade

2020-21
JOURNAL PUBLICATIONS
A. Behera, P. Dupare, M.M. Thawre, A.R. Ballal, “Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP Multidirectional composite laminates”, International Journal of Fatigue, Vol. 136, pp. 105590-105596, July-2020.
H.K. Yadav, A R. Ballal, M.M. Thawre, V.D. Vijayanand, “Recovery and recrystallization during creep exposure of cold worked Ti-modified 14Cr-15Ni austenitic stainless steel”, Materials At High Temperature, Vol. 37, pp. 221-229, August-2020.
H.K. Yadav, A.R. Ballal, M.M. Thawre, V.D. Vijayanand, “Analysis of transient and tertiary creep behavior of Titanium modified 14Cr-15Ni stainless steel”, Materials Research Express, Vol. 7, pp. 16580-16587, April-2020.
D.D. Awale, V.D. Vijayanad, A.R. Ballal, M.M. Thawre, J.G. Kumar, G.V. Prasad Reddy, “Evaluation of tensile properties of various regions of creep exposed dissimilar weld joint using miniature specimen testing”, Engineering Failure Analysis, Vol. 120, pp. 105079-105085, February-2020.
D.D. Awale, A.R. Ballal, M.M. Thawre, V.D. Vijayanad, J.G. Kumar, G. V. Prasad Reddy, “Microstructural investigation and mechanical properties evaluation using miniature specimen testing of various constituents of dissimilar weld joint”, Journal of Nuclear Materials, Vol. 532, pp. 152048-152054, April-2020.
D.D. Awale, A.R. Ballal, M.M. Thawre, “Dissimilar weld joints of P91 and 316LN for power plants applications- A review”, Materials Today: Proceedings; Vol. 28, pp. 2505-2510, May-2020.
D.D. Awale, M.M. Thawre, “Effect of induced external damage on carbon fiber reinforced (CFC) composite”; Materials Today: Proceedings: Vol. 27, pp. 2127-2131, September-2020.
A. Behera, M.M. Thawre, A.R. Ballal, P. Babrekar, P. Vaidya, S. Vijetha, T. Sawant “Effect of Moisture Content and Fiber Orientation on the Mechanical Behavior of GFRP Composites”, Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, pp. 433-439, June-2020.
L. Maddi, R. Shivhare, V. Kumar, M. Goel, M. Ramesh, A. Ballal, “Effect of tempering time on the microstructure and stress rupture properties of P92 steel”, Materials Today: Proceedings, Vol. 44, pp. 34-38, July-2020.
L. Maddi, A.R. Ballal, D.R. Peshwe, M.D. Mathew, “Influence of normalizing and tempering on creep properties of P92 steel”, High Temperature Materials and Processes, Vol. 39, pp.178–188, June-2020.
A. Khond, S. Adil, K. Guruvidyathri, B.S. Murty, B. Majumdar, J. Bhatt, A.K. Srivastav, “Kinetics and phase formation during crystallization of Hf64Cu18Ni18 amorphous alloy”, Phase Transitions, Vol. 94, pp. 110-121, March – 2021.
S. Bandi, A.K. Srivastav, “Unveiling the crystallographic origin of mechanochemically induced monoclinic to triclinic phase transformation in WO3”, Cryst. Eng. Comm. , Vol. 23, pp. 1821-1827, February – 2021.
S. Bandi, A. K. Srivastav, “Understanding the growth mechanism of hematite nanoparticles: The role of maghemite as an intermediate phase”, Crystal Growth & Design, Vol. 21, pp. 16-22, January-2021.
S. Bandi, N N. Suresh, T. Bhoyar, A.K. Srivastav, “WO3.1/3H2O nanorods/nanoplates: Growth mechanism and CO2 uptake”, Materialia, Vol. 14, pp. 100943-100955, December – 2020.
V.B. Rajkumar, Y. Du, S. Liu, K. Cheng, A.K. Srivastav, “Measurements of the melting points, liquidus, and solidus of the Mo, Ta, and Mo-Ta binary alloys using a novel high-speed pyrometric technique”, International Journal of Refractory Metals and Hard Materials, Vol. 93, pp. 105335-105341, December – 2020.
S. Bandi, A.K. Srivastav, “Graphene-based chemiresistive gas sensors”, Comprehensive Analytical Chemistry, Vol. 91, pp. 149-173, November – 2020.
A.K. Srivastav, S. Bandi, A. Kumar, B.S. Murty, “Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy”, Philosophical Magazine Letters, Vol. 100, pp. 442-451, July – 2020.
S. Bandi, D. Vidyasagar, S. Adil, M.K. Singh, J. Basu, A.K. Srivastav, “Crystallite size induced bandgap tuning in WO3 derived from nanocrystalline tungsten”, ScriptaMaterialia, Vol.176, pp. 47-52, February – 2020.
A. Bajpai, J. Bhatt, K. Biswas, N.P. Gurao “A new perspective to thermodynamical designing of high entropy bulk metallic glasses (HE-BMGs)” Physica B: Condensed Matter, Vol. 595, pp. 1-12, October-2020.
K.S.N. Satish Idury, P. Rastogi, R.L. Narayan, N. Singh, K.R. Ravi, B.S. Murty, J. Bhatt, “Room temperature dynamic indentation response of partially crystallized Zr–Cu metallic glass” Journal of Alloys and Compounds, Vol. 834, pp.1-5, September- 2020.
P. Burad, G. Chaitanya, N. Thawari, J. Bhatt, T.V.K Gupta, “Characterization of Additive Manufactured Inconel 718 Alloy Using Laser Cladding”, Key Engineering Materials, Vol. 882, pp. 3-10, Feburary-2021.
A. Deshmukh , A. Khond, J.Bhatt, U.A. Palikundwar, “Understanding the role of Er on glass-forming ability parameters and critical cooling rate in Fe‒based multicomponent bulk metallic glasses” Journal of Alloys and Compounds, Vol. 819, pp.1-8, April -2020.
S. Mehar, S.G. Sapate, N. Vashishtha, P. Bagde, “Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating”, Ceramics International, Vol. 46, pp. 11799-11810, June-2020
S. Mehar, S.G. Sapate, N. Vashishtha, P. Bagde, “Role of friction Energy and Tribo Reduction in Abrasive wear of Alumina Titania Coatings”, Surface Review and Letters, Vol. 27, pp. 2050022, June-2020.
S. Mehar , S.G. Sapate , N. Vashishtha, A. Rathod, P. Bagde, “Friction energy map for sliding wear of Al2O3-TiO2 and Cr2O3-TiO2coatings, Surface Topography”, Metrology and Properties, Vol. 9, pp. 15020-15026, February-2021.
S. Mehar , S.G. Sapate , N. Vashishtha, A. Rathod, P. Bagde, “Investigation on structural, mechanical and tribological properties of plasma sprayed Al2O3-40%TiO2 coating”, Materials Today: Proceedings Vol. 38,pp. 2525–2531, August-2020.
S. Mehar, S.G. Sapate, Nitesh Vashishtha, Avishkar Rathod, Pranay Bagde, “Tribological performance of plasma sprayed Al2O3-TiO2-ZrO2 ceramic coating”, Materials Today: Proceedings, Vol. 38, pp. 2525-2531, Februry-2021.
T.R. Dandekar, A. Gupta, R.K. Khatirkar, R. Kumar, A.D. Gaikwad, “Evolution of microstructure and texture in UNS S32750 super duplex stainless steel weldments”, Transactions of the Indian Institute of Metals, Vol. 41 pp. 1023-1032, March-2021.
T.R. Dandekar, A. Kumar, R.K. Khatirkar, D. Mahadule, G. Ayyappan, “Multi-step cross rolling of UNS S32101 steel – Microstructure, texture and magnetic properties”, Journal of Materials Engineering and Performance, Vol. 30, pp. 2916–2929, Februry-2021.
D. Mahadule, R.K. Khatirkar, A. Gupta, R. Kumar, “Effect of heating temperature and cooling rate on the microstructure and mechanical properties of a Mo rich two phase α+β titanium alloy”, Journal of Materials Research, Vol. 36 pp. 751–763, Janury-2021.
R. Kumar, A. Gupta, T.R. Dandekar, R.K. Khatirkar, “Evolution of microstructure and texture during homogenization in a strip cast AA8011 aluminium alloy”, Intermetallic, Vol. 130, pp. 107064-107071, March-2021.
A. Gupta, R.K. Khatirkar, A. Kumar, K. Thool, N. Bhibhanshu, S. Suwas, “Texture development during cold rolling of a beta titanium alloy: Experiments and simulations”, Metallurgical and Materials Transactions A, Vol. 52, pp. 1031–1043, January-2021.
A. Gupta, R.K. Khatirkar, T. Dandekar, D. Mahadule, “Texture development during multi-step cross rolling of a beta titanium alloy: Experiments and simulations”, Journal of Alloys and Compounds, Vol. 850, pp. 156824-156830, January-2021.
B.H. Vadavadagi, H.V Bhujle, R.K. Khatirkar, “Forming limit diagrams of low carbon steels using digital image correlation technique and enhanced formability predictions incorporating microstructural developments”, Journal of Materials Engineering and Performance, Vol. 29, pp. 6066-6077, August-2020.
P. Kori, B.H. Vadavadagi, R.K. Khatirkar, “Hot deformation characteristics of ASS-304 austenitic stainless steel by tensile tests”, Materials Today: Proceedings, Vol. 28, pp. 1895-1898, June-2020.
A. Kumar, S. Londhe, T. Dandekar, R.K Khatirkar, “Effect of cooling rate on the precipitation behaviour of Fe-Cr-Ni alloy”, Transactions of Indian Institute of Metals, Vol. 73, pp. 1961-1973, June-2020.
N. Deeparekha, A. Gupta, M. Demiral, R.K. Khatirkar, “Cold rolling of interstitial free (IF) steel – Experiments and simulations”, Mechanics of Materials, Vol. 148, pp. 103420-103428, September-2020.
R. Kumar, A. Gupta, T. Dandekar, R.K. Khatirkar, “Microstructure and texture development in AA3003 aluminium alloy”, Materials Today Communications, Vol. 24, pp. 1-10, September-2020.
V. Tandon, M.A. Thombre, A.P. Patil, R.V. Taiwade, H. Vashishtha. “Effect of Heat Input on the Microstructural, Mechanical, and Corrosion Properties of Dissimilar Weldment of Conventional Austenitic Stainless Steel and Low-Nickel Stainless Steel“, Metallography, Microstructure, and Analysis, 9(5), 668-677, Year 2020
CONFERENCE PUBLICATIONS
S. Bandi, A. K. Srivastav, “Waste dry cell battery electrodes derived graphene and its application”, International Virtual Conference on Advances in Functional Materials (AFM 2020), Bhubaneswar, August-2020. (Oral)
U. Pathak, R.V. Taiwade, S. Balbande, “Weldability of bimetallic butt joint between hastelloy C-276 and advance austenitic stainless steel“, Materials Today: Proceedings, 28, 2547–2550, Year 2020
2019-20
JOURNAL PUBLICATIONS
Hari Krishan Yadav, Atul Ballal, Manjusha M. Thawre, David Vijayanand, “Recovery and recrystallisation during creep exposure of cold worked Ti-modified 14Cr–15Ni austenitic stainless steel“, Materials at High Temperatures, In Press, April 2020
Deepshree D. Awale, Atul R. Ballal, M. M. Thawre, “Dissimilar Weld Jointsof P91 and 316LN for Power Plants Applications-A Review“, Materials Today: Proceeding; In press, May 2020
Alok Behera, Prasanna Dupare, Manjusha M. Thawre, Atul Ballal, “Effects of hygrothermal aging and fiber orientations on constant amplitude fatigue properties of CFRP multidirectional composite laminates“, International Journal of Fatigue ,136, 105590, March 2020
Deepshree D. Awale, Atul R. Ballal, Manjusha M. Thawre, V.D. Vijayanand,J. Ganesh Kumar, G.V. Prasad Reddy, “Microstructural investigation and mechanical properties evaluation using miniature specimen testing of various constituents of dissimilar weld joint“, Journal of Nuclear Materials, 532, 152048, Feb.2020.
Alok Behera, Ashok Vishwakarma, M.M. Thawre, Atul Ballal, “Effect of hygrothermal aging on static behavior of quasi-isotropic CFRP composite laminate“, Composites Communications, 17, pp. 51-55 ,Feb. 2020.
Hari Krishan Yadav, Atul Ballal, Manjusha M. Thawre, David Vijayanand, “Analysis of transient and tertiary creep behavior of Titanium modified 15Ni-14Cr stainless steel after cold working” Materials Research Express, 7 (1), pp. 16580,Jan. 2020
Alok Behera , M. M. Thawre and A R Ballal, “Failure Analysis of CFRP Multidirectional Laminates Using the Probabilistic Weibull Distribution Model under Static Loading“, Fibers and Polymers 20(11), pp. 2390-2399, Nov. 2019
Ashok Vishwakarma , Alok Behera , M. M. Thawre and A R Ballal, “Effect of thickness variation on static behaviour of carbon fiber reinforced polymer multidirectional laminated composite“, Materials Research Express, 6, 115312, Sept. 2019
Alok Behera, Prasanna Dupare, Manjusha M. Thawre, Atul R. Ballal, “Effect of fatigue loading on stiffness degradation, energy dissipation, and matrix cracking damage of CFRP [±45]3S composite laminate“, Fatigue and Fracture of Engineering Materials and Structures, 42 (4), pp. 2302-2314, Oct. 2019
Hari Krishan Yadav, A.R.Ballal, M.M.Thawre, V.D.Vijayanand, “Assessment of microstructural evolution in cold-worked Ti-modified 14Cr–15Ni austenitic stainless steel on creep exposure“, Materials Research Express, Volume 6, Number 9, July 2019
Hari Krishan Yadav, A.R.Ballal, M.M.Thawre, V.D.Vijayanand, “Creep studies of Cold Worked Austenitic Stainless Steel“, Procedia Structural Integrity, Volume 14, pp. 605-611, Jan. 2019
Ashish Vaidya, Atul Ballal, Hari Krishan Yadav, Dilip Peshwe, “Stress Rupture Studies of V-notched Grade 92 Steel for High Temperature Applications“, Procedia Structural Integrity, Volume 14, pp. 410-415, Jan. 2019
Sachin Balbande, R.V. Taiwade , A.P. Patil and Ujjawal Pathak, “Cold metal transfer welding of duplex with ferritic and super austenitic stainless steel”, Materials Research Express, 6 (106542), 2019.
Sumitra Sharma, R.V. Taiwade, Abhishek Yadav and Himanshu Vashishtha, “Influence of fillers and welding processes on the microstructuralevolution, mechanical properties and corrosion behavior of dissimilar Hastelloy C-22/AISI 321 joints”, Materials Research Express, 6 (096594), 2019.
J. Verma, R.V. Taiwade, R. Katariya, KanishkaJha, Vipin Tandon, “Evolution of Metallurgical Phases and Its Co‑relation with Mechanical Properties and Corrosion Resistance of 22Cr–5Ni–3Mo and 16Cr–10Ni–2Mo Dissimilar Weldments”, Metallography, Microstructure, and Analysis, Volume 8, pp 506-516, 2019.
Waghmare, U., Dhoble, A.S., Taiwade, R., Verma, J., Vashishtha, H., “Prediction of heat affected zone and other mechanical properties of welded joints of HSLA A588-B of jet blast deflector”, World Journal of Engineering, Volume 16/4, pp-438-444, 2019.
Sanket Mehar, S.G. Sapate, Nitesh Vashishtha, Pranay Bagde, “Effect of Y2O3 addition on tribological properties of plasma sprayed Al2O3-13% TiO2 coating“, Ceramic International, 46, (8B),11799-11810, 2020
Ayush Kumar Goyal, S G Sapate, S Mehar ,NVashishtha , P Bagde and A Rathod, “Tribological properties of HVOF sprayed WC-Cr3C2-Ni coating“, Mater. Res. Express 6, 106415,2019
Nitesh Vashishthaa, Sanjay Sapate, “Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings“, Materials Research. 22(1), 2019
Yogesh Prabhu, S. Vincent, Jatin Bhatt,“Thermodynamic modelling to optimize glass forming composition in multicomponent Zr-Cu-Co-Al system” Materials Today March- 2020 (https://doi.org/10.1016/j.matpr.2020.02.169)
Adithya Nair, Yogesh Prabhu, Jasmitha Mendonca, W.H. Ryu, E.S. Park, Jatin Bhatt, S.Vincent “An experimental case study on corrosion characterization of Cu46Zr40Ti8.5Al5.5 metallic glass” Journal of Non-Crystalline Solids, Vol. 524, pp.119654-119659, November- 2019
Ashwini Kumar, S. J. Dhoble, Jatin Bhatt, J. J. Terblans, H. C. Swart, “Structural characterization and influence of calcination temperature on luminescence properties of Sr0.91Mg2Al5.82Si9.18O30: Eu3+ nanophosphors“, Powder Technology Vol. 354 pp. 591-600, September- 2019
Prashant Parhad, Vinayak Dakre, Ajay Likhite, Jatin Bhatt, “The impact of cutting speed and depth of cut on cutting force during turning of austempered ductile iron“, Materials Today: Proceedings Vol. 19, pp. 663-669, August -2019
CONFERENCE PUBLICATIONS
Ujjawal Pathak, Ravindra V. Taiwade and Sachin Balbande, “Weldability of Bimetallic Butt Joint between Hastelloy C-276 and Advance Austenitic Stainless Steel” 2nd International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN2020), February 28-29, 2020
2018-19
JOURNAL PUBLICATIONS
Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “ TEM Analysis of Austempered Ductile Iron Processed Through Conventional and Two Step Austempering Process“, Trans. Indian Inst. Met, 72(4) 911-917, 2019
Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “Effect of Austenitization Temperature on Microstructure and Mechanical properties of Low Carbon equivalent carbidic austempered ductile iron”, International Journal of Minerals, Metallurgy and Materials, Vol 25, Number 7, 770-778, July 2018
AnujKhond, D. Arvindha Babu, Sai Smaran, Akash Deshmukh, Bhaskar Majumdar , Jatin Bhatt ,Ajeet K.Srivastav “Thermodynamic calculation and experimental validation of Hf-rich glass forming compositions in Hf-Cu-Ni system”, Vol . 500 pp 191-195, November- 2018
Sudhanshu Kuthe, Akash Deshmukh, Umesh A Palikundwar, Jatin Bhatt “Computational Platform for Manufacturing Bulk Metallic Glasses Based on GFA Parameters” Trans. Indian Institute of Metals. (DOI 10.1007/s12666-018-1416-7)
Patil Aniruddha S., Hiwarkar Vijay D., Verma Pankaj K., Khatirkar Rajesh K. (2019), “Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DLMS)”, Journal of Alloys and Compounds, 777, 165-173 (https://doi.org/10.1016/j.jallcom.2018.10.308) (SCI)
Dandekar Tushar R., Gupta Aman, Khatirkar Rajesh K., Vadavadagi Basavaraj (2018), “Shielded metal arc welding of UNS S32750 steel: Microstructure, mechanical properties and corrosion behaviour“, Materials Research Express, 5, 106506 (https://doi.org/10.1088/2053-1591/aad99a) (SCIe)
Kumar Amit, Gupta Aman, Kumar Amit, Khatirkar Rajesh K., Bibhanshu Nitish, Suwas Satyam (2018), “Strain rate sensitivity behaviour of a chrome-nickelaustenitic-ferritic stainless steel and its constitutive modelling“, ISIJ International, 58(10), 1840-1849 (https://doi.org/10.2355/isijinternational.ISIJINT-2018-051) (SCI)
Kumar Amit, Khatirkar Rajesh K., Gupta Aman, Shekhawat Satish, Suwas Satyam (2018), “Deciphering the possible role of strain path on the evolution of microstructure, texture and magnetic properties in a Fe-Cr-Ni alloy“, Metallurgical and Materials Transactions A, 49(8), 3402-3418 (https://doi.org/10.1007/s11661-018-4714-0) (SCI)
Kumar Amit, Gupta Aman, Khatirkar Rajesh Kisni, Suwas Satyam (2018),”Texture development during cross rolling of a dual phase Fe-Cr-Ni alloy: experiments and simulations“, Philosophical Magazine Letters, 98 (1), 17- 26 (https://doi.org/10.1080/09500839.2018.1446561) (SCI)
Gupta Aman, Khatirkar Rajesh, Kisni, Kumar Amit, Parihar Manendra S. (2018),”Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in alpha+beta titanium alloy“, Journal of Materials Research [Cambridge Core], 33(8), 946-957 (https://doi.org/10.1557/jmr.2018.54) (SCI)
Gupta Aman, Kumar Amit, Baskaran T., Arya S.B., Khatirkar Rajesh K. (2018), “Effect of heat input on microstructure and corrosion behaviour of duplex stainless steel shielded metal arc welds“, Transactions of the Indian Institute of Metals, 71(7), 1595-1606 (https://doi.org/10.1007/s12666-018-1294-z) (SCIe)
Kumar Ranjeet, Gupta Aman, Kumar Amit, Chouhan R.N., Khatirkar Rajesh K. (2018),”Microstructure and texture development during deformation and recrystallization in strip cast AA8011 aluminium alloy“, Journal of Alloys and Compounds, 742, 369-382 (https://doi.org/10.1016/j.jallcom.2018.01.280) (SCI)
Verma Jagesvar, Taiwade Ravindra V. , Reddy Chandraprakesh, Khatirkar Rajesh K. (2018),”Effect of friction stir welding process parameters on Mg-AZ31B/Al-6061 joints“, Materials and Manufacturing Processes, 33(3), 308- 314(http://dx.doi.org/10.1080/10426914.2017.1291957) (SCIe)
Bagde P., Sapate S.G., Khatirkar R.K., Vashishtha N. (2018), “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings“,Tribology International, 121 (4), 353-372 (http://dx.doi.org/10.1016/j.triboint.2018.01.067) (SCI)
Kumar Nilesh, Kumar Amit, Gupta Aman, Gaikwad Ashvin D., Khatirkar Rajesh K. (2018),”Gas tungsten arc welding of 316L austenitic stainless steel with UNS S32205 duplex stainless steel“, Transactions of the Indian Institute of Metals, 71(2), 361- 372 (http://dx.doi.org/10.1007/s12666-017-1167-x) (SCIe)
Bagde P., Sapate S., Khatirkar R., Vashishtha N., Tailor S. (2018), “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating“, Materials Research Express, 5(2), (http://doi.org/10.1088/2053-1591/aaacf4) (SCIe)
Seema S. Munjewar, Shashikant B. Thombre, Awanikumar P. Patil, “Passive direct alcohol fuel cell using methanol and 2-propanol mixture as fuel“, Ionics, https://doi.org/10.1007/s11581-018-2627-y
Ankur V. Bansod, Awanikumar P. Patil, Sourabh Shukla, (2018) “Effect of heat on microstructural, mechanical and electrochemical evaluation of tungsten inert gas welding of low-nickel ASS“, Anti-Corrosion Methods and Materials, https://doi.org/10.1108/ACMM-05-2018-1941
Vipin Tandon, Awanikumar Patil, Ramesh C Rathod, “Correlation of martensite content and dislocation density of cold worked 316L on defect densities of passivating film in acidic environment“, Materials Research Express 5 (2018) 086515, https://doi.org/10.1088/2053-1591/aacee9
Nilay N. Khobragade, Ankur V. Bansod and Awanikumar P. Patil, “Effect of Dissolved Oxygen on the Corrosion Behavior of 304 SS in 0.1N Nitric Acid Containing Chloride” 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aab8de
Nilay N. Khobragade , Ankur V. Bansod, Karansagar V. Giradkar, Awanikumar P. Patil, KetanJagtap, Raju Pawde and Abhijeet P. Moon, “Effect of Concentration and Surface Roughness on Corrosion Behavior of Co-Cr-Mo Alloy in Hyaluronic Acid“, 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aaa5f2
Vipin Tandon, Awanikumar Patil, Ramesh C Rathod, SourabhShukla, “Influence of cold work on electrochemical behavior of 316L ASS in PEMFC environment“, Mater. Res. Express 5 (2018) 026528 https://doi.org/10.1088/2053-1591/aaaf27
Kumar A., Chopkar M.K., Verma J., Taiwade R.V., Tondon V., Shukla S, “Effect of filler and autogenous TIG welding on microstructure, mechanical properties and corrosion resistance of nitronic 50 stainless steel” Materials Research Express Volume 6, Issue 2, February 2019, Article number 026557.
Sharma S., Taiwade R.V., Vashishtha S., and Mukherjee S., “Microstructural characterization, mechanical properties and corrosion behaviour of pulsed current GTA welded bimetallic joints between superalloy C-276 and stabilized austenitic stainless steel grade 321” Materials Research Express Volume 6, Issue 1, January 2019, Article number 016532
Sharma S., Taiwade R.V., Vashishtha S., “Influence of filler material composition on the microstructural evolution, mechanical properties and corrosion behaviour of nickelbased super alloy C-276” Materials Research Express Volume 6, Issue 4, 2019, Article number 046505
Jagesvar Verma, Ravindra V. Taiwade, Ravinder Kataria, Anil Kumar, “Welding and electrochemical behavior of ferritic AISI 430 and austeno-ferritic UNS 32205 dissimilar welds“, Journal of Manufacturing Processes, Volume 34 Part A, pp 292-302 (2018)
Pant, Pallavi; Verma, Jagesvar; Taiwade Ravindra and Phani Prabhakar, K. “Influence of advanced laser-arc hybrid welding and conventional MIG process on microstructure, mechanical properties and corrosion resistance of dissimilar joints,” Materials Research Express, Volume 5, No-6 (2018)
Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, Sudeepta Mukherjee and Shruti Tiwari, “Consumable Selection for Pulsed Current Gas Tungsten Arc Welded Bimetallic Joints between Super C-276 alloy and Ti -Stabilized Grade 321“, Journal of Manufacturing processes, 32 (2018) 32-47.
N Vashishtha, S Sapate, “Effect of Experimental Parameters on Wear Response of Thermally Sprayed Carbide Based Coatings” Materials Research, 2019, l 22 ( 1). DOI: 10.1590/1980-5373-mr-2018-0475
Vashishtha N, Sapate S.G. Gahlot J Bagde P, “Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating“, Tribology Letters, 66, 2, 2018, 56-66
Bagde P Sapate S.G. Khatirkar R Vashishtha N, “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni Graphite coatings“, Tribology International, 121 (2018), 353-372
Nitesh Vashishtha, S.G. Sapate, B. J. Sahariah, Pranay Bagde, “Microstructural characterization and wear behaviour of High Velocity Oxy Fuel sprayed Cr 3 C 2 -25NiCr coating”,Materials Today: Proceedings, 2018, 5(9),17686-17693
Pranay Bagde, S. G. Sapate, R. K. Khatirkar, Nitesh Vashishtha, Satish Tailor “Friction and Abrasive Wear Behaviour of Cr2O3 -TiO2 coating”, Materials Research Express. 5 (2018), 026410
Bagde P, Sapate S.G., Khatirkar R, Vashishtha N Tailor S, “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2coating“, Materials Research Express, vol. 5,(2),2018, 026410
Nitesh Vashishtha, S.G. Sapate , Pranay Bagde , A.B. Rathod, “Effect of heat treatment on friction and abrasive wear behaviour of WC-12Co and Cr3C2-25NiCr coatings“, Tribology International 118 (2018) 381–399
Yogesh Y. Mahajan, R. K. Paretkar, D. R. Peshwe, “Optimization of Retrogression Parameters of AA7010 Alloy” Transaction of the Indian Institute of Metals, (2018) 71(7):4687-1697
Yogesh Mahajan, D. R. Peshwe, “Effect of Temper Conditions on Abrasive wear behaviour of AA7010 Alloy” Transaction of the Indian Institute of Metals, (2018) 71(4):1025-1032
Alok Behera , Manjusha M. Thawre , Atul Ballal ,”Effect of matrix crack generation on fatigue life of CFRP multidirectional laminates”, Materials Today Proceedings, Vol. 5,pp. 20078-20084,2018
Alok Behera , Janaki Dehuri, M. M. Thawre, ”A comparative study on laminated and randomly oriented Luffa –Kevlar reinforced hybrid composites”, Journal of Natural Fibers, Vol. 16 No 2 , pp. 237-244,2019.
CONFERENCE PUBLICATIONS
Vinayak Dakre, D. R. Peshwe, S. U. Pathak, Ajay Likhite, “Characterization of Austempered Ferritic Ductile Iron”, IMMT 2017, IOP Conference Series; Material Science and Engineering, Dubai, UAE. 346, 2018
Ankush S Marodkar, Ravindra V Taiwade, Himanshu Vashishtha, “Corrosion Behavior of Ni- based Coatings Deposited by Thermal Spray on Low Nickel Cr-Mn Stainless Steel”, , 5th International CORSYM, Chennai, India, 23-24 March 2018, pp23-24
Prateek Shendre, Ravindra Taiwade, Jagesvar Verma, “Welding and Corrosion Study of Ferritic Stainless Steel Weld Joint”, 5th International CORSYM, Chennai, India, 23-24 March 2018, pp 165-166
2017-18
JOURNAL PUBLICATIONS
Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, Sudeepta Mukherjee and Shruti Tiwari, “Consumable Selection for Pulsed Current Gas Tungsten Arc Welded Bimetallic Joints between Super C-276 alloy and Ti -Stabilized Grade 321“, Journal of Manufacturing processes, 32 (2018) 32-47.
Jagesvar Verma, Ravindra V. Taiwade, S.G. Sapate, A.P. Patil and A.S. Dhoble, “Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir Welded Aluminum and Magnesium Dissimilar Alloys“, Journal of Materials Engineering and Performance, Volume 26, Issue 10, pp 4738–4747, (October 2017)
Jagesvar Verma, Ravindra V. Taiwade, Reshma Sonkusare, “Effects of austenitic and duplex electrodes on microstructure, mechanical properties, pitting and galvanic corrosion resistance of ferritic and dual-phase stainless steel dissimilar joints“, Journal of Materials Research (Cambridge Core) Volume 32, Issue 16 , pp. 3066-3077, (28 August 2017)
Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, “Investigation on the Multi-pass Gas Tungsten Arc Welded Bi-metallic Combination between Nickel-based Superalloy and Ti-stabilized Austenitic Stainless Steel“, Journal of Materials Research (Cambridge Core Volume 32, Issue 16, pp. 3055-3065, (28 August 2017)
Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha,”Effect of Pulsed Current Gas Tungsten Arc Process on the Dissimilar Weldments between Nickel-based Superalloy/Austenitic Stainless Steel“, Iron and Steel Institute of Japan, Vol. 57 No. 6, pp. 1080-1086, (2017)
Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, “Effect of acetic acid on corrosion behavior of 201, 304 and 430 Stainless Steels“, International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde) Volume 108, Issue 5, pp 406-415 (May 2017)
Sumitra Sharma, Ravindra V. Taiwade, Himanshu Vashishtha, “Effect of Continuous and Pulsed Current Gas Tungsten Arc Welding on Dissimilar Weldments between Hastelloy C-276/AISI 321 Austenitic Stainless Steel“, Journal of Materials Engineering and Performance, Volume 26, Issue 3, pp 1146–1157.
Jagesvar Verma, Ravindra V. Taiwade, C. Reddy and R.K.Khatirkar,”Effect of Friction Stir Welding Process Parameters on Mg-AZ31B/Al-6061Joints“, Materials & Manufacturing Processes, Taylor and Francis.
Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, “Effect of Electrodes and Post Weld Solution Annealing Treatment on Microstructures, Mechanical properties and Corrosion Resistance of Dissimilar High Nitrogen” Austenitic and Conventional Austenitic Stainless Steel Weldments, Materials Transaction 58(2), 2017
Jagesvar Verma and Ravindra V. Taiwade “Effect of Welding Processes and Conditions on the Microstructure, Mechanical Properties and Corrosion Resistance of Duplex Stainless Steel Weldments – A Review“, Journal of Manufacturing processes, 25 pp. 134-152 (2017)
Himanshu Vashishtha, Ravindra V. Taiwade, Sumitra Sharma, Awanikumar P. Patil, “Effect of welding processes on microstructural and mechanical properties of dissimilar weldments between conventional austenitic and high nitrogen austenitic stainless steels“, Journal of Manufacturing Processes 25 (2017) 49–59
K. Akkiraju, S. Kashyap, Ajeet K. Srivastav, N. Chawake, Lukas Bichler and B.S. Murty, “Novel coalescence-driven grain-growth mechanism duringannealing/spark plasma”, Journal of the European Ceramic Society, 37, 4973-4977, December/2017.
Nilay N. Khobragade, Ankur V. Bansod and Awanikumar P. Patil, “Effect of Dissolved Oxygen on the Corrosion Behavior of 304 SS in 0.1N Nitric Acid Containing Chloride” 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aab8de
Nilay N. Khobragade, Ankur V. Bansod, Karansagar V. Giradkar, Awanikumar P. Patil, Ketan Jagtap, Raju Pawde and Abhijeet P. Moon, “Effect of Concentration and Surface Roughness on Corrosion Behavior of Co-Cr-Mo Alloy in Hyaluronic Acid“, 2018 Mater. Res. Express in press https://doi.org/10.1088/2053-1591/aaa5f2
Vipin Tondon, Awanikumar Patil, Ramesh C Rathod, Sourabh Shukla, “Influence of cold work on electrochemical behavior of 316L ASS in PEMFC environment“, Mater. Res. Express 5 (2018) 026528 https://doi.org/10.1088/2053-1591/aaaf27
Vipin Tandon, Awanikumar Patil and ankur Bansod, “Effect of Zn addition on corrosion resistance of Cu-Ni alloy in clean and sulphide contaminated seawater“, Canadain Metallurgical Quarterly, 2017 (hhtps://doi.org/10.1080/00084433.2017.1403073
Ankur V Bansod and Awanikumar P Patil, “Effect of Welding Processes on Microstructure, Mechanical Properties and Corrosion Behaviour of Low-Nickel Austenitic Steels“, Metallography, Microstructure and Analysis, DOI 10.1007/s13632-017-0368-3, July 2017 (Springer)
Vipin Tandon, Ankur Bansod, and Awanikumar Patil, “Effect of small amount of Zinc addition on corrosion resistance of Cu-10Ni alloy in clan and sulphide contaiminated seawater“, Copper Topics, Vol 42 (2), June 2017, pp 21-26
Dipika R. Barbadikar, T. Sakthivel, A. R. Ballal, D. R. Peshwe, P. Syamala Rao & M. D. Mathew, “An assessment of mechanical properties of P92 steel weld joint and simulated heat affected zones by ball indentation technique”, Materials at High Temperatures, Published online: 11 Sep 2017
Ch Jagadeeswara Rao, TP Ismail, A Ravi Shankar, Atul Ramesh Ballal, C Mallika, U Kamachi Mudali, “Corrosion Behaviour of Uncoated and Ceramic Coated 9Cr–1Mo Steel in Molten LiCl–KCl–UCl3 Salt”, Transactions of the Indian Institute of Metals, Volume 70 , Issue 5, pp. 1359-1367, July 2017.
Hari Krishan Yadav, Lakshmiprasad Maddi, A. R. Ballal, D. R. Peshwe, Venkateswara Rao “Structural and Mechanical Characterization of Service Exposed 4 2.25Cr–1Mo Steel“, Transactions of the Indian Institute of Metals, Volume 70 , Issue 4, pp. 1091-1096, May 2017.
Swamini Chopra; Saisha Batthula; Kavita Deshmukh; Dilip Peshwe, “Tribological Behaviour of Multi-Walled Carbon Nanotubes (MWCNT) Filled Polybutylene Terephthalate (PBT) Nanocomposites”, Transactions of Indian Institute of Metals, 70(3):801-807, 2017.
Swamini Chopra; Kavita A. Deshmukh; Dilip Peshwe, “Theoretical prediction of interfacial properties of PBT/CNT nanocomposites and its experimental evaluation”, Mechanics of Materials, 109: pp11–17, 2017.
Kavita A Deshmukh, G. R. Pode, S. R. Roy, B. K. Gupte, Swamini Chopra, A.D.Deshmukh, D.R.Peshwe, “Effect of Cryo-ageing at liquid nitrogen temperature and subsequent thermal annealing on interface of Talc filled Polypropylene with different particle size” Trans Indian Inst Met, 71(2)(2018), pp 403-410
Kavita Deshmukh, Maithili Bhakare, Samyukta Shrivastav, Vaishnavi Naik, Swamini Chopra, C.L. Gogte, D.R. Peshwe, “Synthesis and Characterization of Self Healing Thermoplastic Polyurethane (TPU) Thin Films Reinforced with Multi-wall Carbon Nanotubes (MWCNTs)” Mantech Publications, Journal of Nano Technology and Its Application in Engineering Volume 2 Issue 1&2, pp 1-13, (2017)
Sonal P. Ghawade, Kavita A. Deshmukh, D. R. Peshwe, S. J. Dhoble, Abhay D. Deshmukh, “Efficient Red Downshifting in Layered Structure: A Broad Spectral Converter for Enhancing Photo-response of Solar Cell”, J Inorg Organomet Polym, Volume 27, PP- 173-180,(2017)
Swamini Chopra, Kavita A. Deshmukh, Abhay D. Deshmukh, D. R. Peshwe. “Functionalization and Melt-compounding of MWCNTs in PA-6 for Tribological Applications“, IOP Conference Series: Materials Science and Engineering.
Revati Deshpande, Garima Naik, Swamini Chopra, Kavita A. Deshmukh, Abhay D. Deshmukh, D. R. Peshwe, “A study on mechanical properties of PBT nano-composites reinforced with microwave functionalized MWCNTs“, IOP Conference Series: Materials Science and Engineering.
Shreshtha S. Mishra, Nandita V. Ghodki, Swamini Chopra, S. A. Pande, Kavita A. Deshmukh, A. D. Deshmukh, D. R. Peshwe, “Synthesis and Characterization of a Novel Conducting Biopolymer Chitosan Grafted Polyaniline-Polypyrrole Flexible copolymer” International Journal of Science and Research Methodology, Human Journal, 8(1): 104-111, 2017.
Priyanka Khandal, Shweta Gite, Swamini Chopra, S. A. Pande, Kavita A. Deshmukh, A. D. Deshmukh, D.R. Peshwe. “Preparation, Characterization and Variation of Electrical Conductivity with Temperature of Aniline-Pyrrole Copolymer doped with CNT (in-situ and ex-situ)“, VIBGYOR – Bi Annual Multidisciplinary Research Journal.
Swamini Chopra, Kavita A Deshmukh, Abhay Deshmukh, Shilpa Pande, Dilip Peshwe, “Inflorescence type morphology and Mirror-Mist-Hackle pattern in Tensile Fractograph of MWCNT/PBT Nano-composites”, International Journal of Materials Research.
Kavita Deshmukh, A.R. Kangda, S.P. Mahajan, Swamini Chopra, Abhay Deshmukh, D.R. Peshwe, “Influence of Talc Particle Size on Nucleating Efficiency of Commercial Isotactic Polypropylene (iPP)“. Journal of Research in Engineering and Applied Sciences (JREAS) (Accepted)
Sandeep Kuriakose, Promod Kumar Patowari, Jatin Bhatt “Machinability study of Zr-Cu-Ti metallic gass by micro hole drilling using micro-USM” Journal of Materials Processing Technology, Vol. 240, pp.42-51 April 2017.
Alok Behera, Janaki Dehury & M.M. Thawre (2017) “A comparative study on laminated and randomly oriented Luffa-Kevlar Reinforced hybrid composites“, Journal of Natural Fibers, ISSN: 1544-0478 (Online) DOI: 10.1080/15440478.2017.1414653
Gupta Aman, Khatirkar Rajesh Kisni, Kumar Amit, Parihar Manendra S. (2018), “Investigations on the effect of heating temperature and cooling rate on evolution of microstructure in alpha+beta titanium alloy“, Journal of Materials Research [Cambridge Core], (accepted 28 February 2018) (SCI)
Kumar Amit, Gupta Aman, Khatirkar Rajesh Kisni, Suwas Satyam (2018), “Texture development during cross rolling of a dual phase Fe-Cr-Ni alloy: experiments and simulations“, Philosophical Magazine Letters, (accepted 08 February 2018) (SCI)
Gupta Aman, Kumar Amit, Baskaran T., Arya S.B., Khatirkar Rajesh K. (2018), “Effect of heat input on microstructure and corrosion behaviour of duplex stainless steel shielded metal arc welds“, Transactions of the Indian Institute of Metals (available online) (https://doi.org/10.1007/s12666-018-1294-z) (SCIe)
Kumar Ranjeet, Gupta Aman, Kumar Amit, Chouhan R.N., Khatirkar Rajesh K. (2018), “Microstructure and texture development during deformation and recrystallization in strip cast AA8011 aluminium alloy“, Journal of Alloys and Compounds (available online) (https://doi.org/10.1016/j.jallcom.2018.01.280) (SCI)
Bagde P., Sapate S.G., Khatirkar R.K., Vashishtha N. (2018). “Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings“, Tribology International, 121 (4), 353-372 (http://dx.doi.org/10.1016/j.triboint.2018.01.067) (SCI)
Kumar Nilesh, Kumar Amit, Gupta Aman, Gaikwad Ashvin D., Khatirkar Rajesh K. (2018). “Gas tungsten arc welding of 316L austenitic stainless steel with UNS S32205 duplex stainless steel“, Transactions of the Indian Institute of Metals, 71(2), 361-372 (http://dx.doi.org/10.1007/s12666-017-1167-x) (SCIe)
Bagde P., Sapate S., Khatirkar R., Vashishtha N., Tailor S. (2018), “Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating” Materials Research Express, 5(2), (http://doi.org/10.1088/2053-1591/aaacf4) (SCIe)
Kumar Amit, Khatirkar Rajesh K., Darshan Chalapathi, Bibhanshu Nitish, Suwas Satyam (2017), “Texture development during cold rolling of Fe-Cr-Ni alloy – Experiments and simulations“, Philosophical Magazine, 97(23), 1939-1962 (http://dx.doi.org/10.1080/14786435.2017.1322727) (SCI)
Kumar Amit, Khatirkar Rajesh K., Darshan Chalapathi, Kumar Gulshan, Suwas Satyam (2017), “Microstructure and texture development during cold rolling in UNS S32205 and UNS S32760 duplex stainless steels“, Metallurgical and Materials Transactions A, 48, 2349-2362. (http://dx.doi.org/10.1007/s11661-017-4026-9) (SCI)
Vashishtha Nitesh , Khatirkar R.K., Sapate S.G. (2017), “Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2-25NiCr coatings“, Tribology International. 105, 55-68. (http://dx.doi.org/10.1016/j.triboint.2016.09.025) (SCI)
Vashishtha N, Sapate S.G. Gahlot J Bagde P, “Effect of Tribo-Oxidation on Friction and Wear Behaviour of HVOF Sprayed WC–10Co–4Cr Coating” Tribology Letters, vol. 66, 2, 2018, 56-66
Nitesh Vashishtha, S.G. Sapate , Pranay Bagde , A.B. Rathod, “Effect of heat treatment on friction and abrasive wear behaviour of WC-12Co and Cr3C2-25NiCr coatings“, Tribology International 118 (2018) 381–399
Nitesh Vashishtha, S .G Sapate, “Abrasive wear maps for High Velocity Oxy Fuel (HVOF) sprayed WC-12Co and Cr3C2−25NiCr coatings“, Tribology International, 114, 2017, 290-3015.
R. Rajeshkumar , V. Udhayabanu , A. Srinivasan , K.R. Ravi “Microstructural evolution in ultrafine grained Al-Graphite composite synthesized via combined use of ultrasonic treatment and friction stir processing” Journal of Alloys and Compounds Vol.726 pp 358-366 2017.
M. Bradha, K. Kavitha, T. Vijayaraghavan, G. Vigila, P. Suresh, V. Udhayabanu, Anuradha Ashok, “Solid state synthesis and analyses of Sr4(Sr2Ta2)O11 complex perovskite with reduced heat treatment steps”, Materials Characterization Vol.128 , pp. 142–147,2017.
K. Kavithaa, T. Vijayaraghavan, N. Gouthami, V.Udhayabanu, Anuradha M. Ashok, “Solid-state synthesis and electrical conductivity properties of Ba3SrTa2O9 complex perovskite”, Materials Characterization,Vol. 133 ,pp.17–24,2017
Yogesh Mahajan, D. R. Peshwe, “Effect of Temper Conditions on Abrasive wear behaviour of AA7010 Alloy“, Transaction of the Indian Institute of Metals, Vol. 71(4), pp. 1025-1032, December – 2017
Yogesh Y. Mahajan, R. K. Paretkar, D.R .Peshwe, “Optimization of Retrogression Parameters of AA7010 Alloy“, Transaction of the Indian Institute of Metals, Published online: 28 March– 2018
V.V.Karambelkar, S.N.Paul, J.D.Ekhe, “Heterogeneous conducting polypyrrole based sensing compound“, RASAYAN J.Chem, Vol 10(3),pp 832-837,Jul- Sep 2017.
CONFERENCE PUBLICATIONS
Ankush S Marodkar, Ravindra V Taiwade and Himanshu Vashishtha, “Corrosion Behavior of Ni-based Coatings Deposited by Thermal Spray on Low Nickel Cr-Mn Stainless Steel“, published paper in Proceedings of the 5th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2018), Chennai (TN) 23-24 March 2018.
Prateek Shendre, Ravindra Taiwade and Jagesvar Verma, “Welding and Corrosion Study of Ferritic Stainless Steel Weld Joint” , published paper in Proceedings of the 5th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2018), Chennai (TN) 23-24 March 2018.
Suresh Bandi, Ajeet K. Srivastav, “In situ rGO/TiO2 nanocomposites for gas sensing applicationss”, CHEMIX’18, Visvesvaraya National Institute of Technology Nagpur; 04/2018 (Best Paper Award)
Suresh Bandi, Vikram Hastak, Sanjay Kashyap, D.R. Peshwe and Ajeet K. Srivastav:, “HRTEM Study of Superparamagnetic Iron Oxide Nanoparticles“, ICONSAT 2018, Indian Institute of Science Bangalore; 03/2018
Vedasri Bai Khavala, Gurudev Tadas, Vabhav Sharma, Suresh Bandi and Ajeet K. Srivastav, “Glass forming ability, thermal stability and indentation characteristic of Hf-Cu-Ni metallic glass” RAMSE 2018, Indian Institute of Technology (ISM) Dhanbad; 03/2018
Suresh Bandi, Vikram Hastak, D.R. Peshwe and Ajeet K. Srivastav, “In-situ TiO2/rGO Nanocomposites for CO Detection“. MRSI symposium on “Advances in Functional and Exotic Materials” (AFEM-2018), Tiruchirapalli; 02/2018
Suresh Bandi, Vikram Hastak, D.R. Peshwe and Ajeet K. Srivastav, “α – Fe2O3 /rGO Nanocomposites for Gas Sensing Applications“. International Conference on Advances in Catalysis for Energy and Environment (CACEE-2018), Tata Institute of Fundamental Research (TIFR), Mumbai; 01/2018
Ajeet K. Srivastav, Devinder Yadav, N.S. Karthiselva, Niraj Chawake and B.S. Murty:, “Microstructure evolution during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy” 24th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2017), San Sebastian, Spain; 06/2017
Hari Krishan Yadav, A.R. Ballal, and M.M Thawre, “Microstructure Evolution during Creep of Cold Worked Austenitic Stainless Steel”, at International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani, Dubai, UAE, November 28-29, 2017
Dipika R. Barbadikar, S. Vincent, A.R. Ballal, D.R. Peshwe, and M.D. Mathew , “Optimization of BI test parameters to investigate mechanical properties of P92 steel”, at International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), BITS Pilani, Dubai, UAE, November 28-29, 2017
Alisha Nanwani, Gurpreet Saini, Kavita A. Deshmukh, D.R. Peshwe, S.J. Dhoble and Abhay D. Deshmukh, “Electrochemical Analysis Of Nickel Cobaltite-Magnesium Cobaltite Nanocomposites For Supercapacitor Application” , International Conference On Advanced Rechargeable Batteries & allied Materials – 2017 (ICARBM-2017), P-111, 8-10 March 2017
Sonal P. Ghawade, Kavita A. Deshmukh, Swamini Chopra, D.R. Peshwe, S.J. Dhoble, Abhay D. Deshmukh, “Rapid Synthesis Of Highly Luminescent C-Dots For Improving The Efficiency Of C-Si Solar Cell International Conference On Advanced Rechargeable Batteries & allied Materials”– 2017 (ICARBM-2017), P-62, 8-10 March 2017
Ramendra Kumar Gupta, Jayakrishnan Nampoothir, S. Dhamodharan, K.R.Ravi and V. Udhayabanu, “Ultrasonic assisted Synthesis of Al-4.4Cu/Grp Composite and its Characterisation” NMD-ATM-2017,2017-bits Goa.
Aman Parashar, Saurabh Patil, Shubham Mahajan, Ramendra Kumar Gupta, V.Udhayabanu “Age Hardening kinetics of Al-4.4Cu Alloy-Graphite composite synthesised via conventional Stir Casting followed by Ultrasonic Treatment “NMD-ATM-2017,2017-bits Goa.

(2020-21)
Sr. No.	Name of Faculty and Scholars	Patent Title	Application No. with Date	Present Status (if awarded, Patent No.)
1	Dr. Ajeet Kumar SrivastavMr. Suresh BandiDr. D. R. Peshwe	Graphene from waste battery electrodes	Application No.: 201821006507February 21, 2018	Awarded (on February 24, 2020)Patent No.: 332793
2	Mr. Jageshvar VermaDr. Ravindra V. Taiwade	A process of preparation of the etchant	Application No.:2017210121815 April 2017	Awarded (on November 22, 2021)Patent No.: 382191
(2018-19)
Sr. No.	Name of Faculty and Scholars	Patent Title	Application No. with Date	Present Status (if awarded, Patent No.)
1	Dr. Kavita N. PandeDr. M. M. ThawreDr. D.R.Peshwe	Effect of thickness on fatigue life of aircraft T joint component	2021821030784Dt: 07/09/2018	Awaiting for examination
(2017-18)
Sr. No.	Name of Faculty and Scholars	Patent Title	Application No. with Date	Present Status (if awarded, Patent No.)
1	Ms. Kavita N. PandeDr. D. R. Peshwe	“Effectiveness of optimized Cryo-treatment on Polymer Composites”	1724/MUM/201416 May 2014	Published
2	Dr. D. R. Peshwe	“Nonisothermal Crystallization kinetics of Cryogenically treated PBT/Wollastonite Composite to assess its Reprocessing Crystallization conditions”	TEMP/ E-1/ 31024/2017-MUM	–
3	Dr. D. R. Peshwe	Microwave Treatment of polymer and poymer CNT nano composites for enhanced mechanical properties	In process	–
4	Dr. D. R. Peshwe	Cryogenic Treatment of UHDPE for Biomedical Application	In process	–

Sr. No.	Name of the Coordinator	Title	Duration
1	D. V. Moghe, Dr. Y. Y. Mahajan, Dr. A. B. Rathod, Dr. A. V. Agasti, Dr. C. A. Joshi	TEQIP-III Sponsored Five-Day Online Workshop on Aspects of Ladle and Tundish Metallurgy	5 Days01st to 05th March 2021

Ongoing
Sr. No.	Details
	Creep behaviour of turbine material, GTRE Bengaluru, 20 lakhs, A. R. Ballal, D. R. Peshwe
Completed
Sr. No.	Details
1	Performance Assessment of Induction Furnace Steel Making, SRJ Peety Steels Jalna, 4 lakhs, D. V. Moghe, A. P. Patil, Y. Y. Mahajan
2	High temperature tensile testing, METALFAB Nagpur, 0.236 lakhs, A. R. Ballal
3	High temperature creep, AUSC Mission, 20 lakhs, A. R. Ballal
4	Academic projects, GTRE Bengaluru, A. R. Ballal, M. M. Thawre, D. R. Peshwe
5	Consultancy, Research & Development Establishment (R&DE), Dighi, Pune, 1.77 lakhs, M. M. Thawre, D. R. Peshwe
6	MTech Project, HINDALCO, J. G. Bhatt (VNIT), A. Krishnakumar
7	Failure Testing, Viraj Profiles, 0.05 lakhs, A. A. Likhite
8	Technical report on functions of Coke in blast furnace, JSW Steel Ltd, Dolvi, 3.5 lakhs, D. V. Moghe, A. P. Patil
9	Failure analysis of roll, ADOR Fontech, MIDC, Hingna, 1.5 lakhs, A. P. Patil
10	Academic project, IGCAR Kalpakkam, A. R. Ballal
11	Academic project, IISc Bangalore, A. R. Ballal
12	Electron backscattered diffraction and textures in metals and alloys, IIT Bombay, R. K. Khatirkar (VNIT), Indradev Samajdar
13	Deformation and recrystallization texture development in two phase materials, IISc Bangalore, R. K. Khatirkar (VNIT), Satyam Suwas
14	Textures and magnetic properties of electrical steels, Defence Institute of Advanced Technology, Pune, R. K. Khatirkar (VNIT), Vijay Hiwarkar
15	Rolling and galvanizing of low carbon steels, JSW Ispat Ltd, Kalmeshwar, R. K. Khatirkar (VNIT), Rajeev Jayaswal