Research publications in International / National Conferences

  • Applied Mechanics
  • Architecture and Planning
  • Chemistry
  • Chemical
  • Civil
  • Computer Science
  • Electrical & Electronics
  • Electronics & Communication
  • VLSI & Nanotechnology
  • Humanities & Social Sciences
  • Mathematics
  • Mechanical
  • Metallurgical & Materials
  • Mining

  1. D. Phadke and O.R. Jaiswal, “Finite Element Modeling of an Infinite Beam on Elastic Foundation subjected to a Moving Load”, The Third International Conference on Railway Technology: Research, Development and Maintenance, Cagliari, Sardinia, Italy, 5-8 April 2016.
  2. R. Jaiswal, Nandhini R. and K. P. Patel, “Assessment of New Indian Codal Provisions for Along Wind Analysis of Tall Structures”, In Proceeding of The Eighth National Conference on Wind Engineering, IIT (BHU), Varanasi, India, 16-17 December, 2016.
  3. Gwalani and O.R. Jaiswal, “Vibration Control using Tuned Mass Damper”, In Proceeding of International Conference on Emerging Technology in Structural Engineering, ETSE-2017, KDKCE, Nagpur, India, 17-18 March 2017.
  4. Mahajan, R. Kumar and O. G. Kumbhar, “Comparative Study of Flat Slab-Column Connection Techniques for Seismic Loading”, Structural Engineering Convention 2016, CSIR-SERC, 166-171, 2016.
  5. G. Kumbhar and  R. Kumar, “Effect of Modeling Assumptions on Seismic Performance of RC Building”, Structural Engineering Convention 2016, CSIR-SERC, 92-97, 2016.
  6. Hadole, R. Kumar, and O. Kumbhar, “Seismic Performance Assessment of Fire Affected Reinforced Concrete Building Using Non-Linear Static Procedure.”, in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  7. Deoda, R. Kumar, and O. Kumbhar, “Seismic Performance Assessment of Pre-Stressed Precast RC Structure Using Non-Linear Static Procedure.”, in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  8. O. Lakhade, R. Kumar, and O. R. Jaiswal, “Comparison of Code Provisions on Seismic Analysis of Liquid Storage Tanks.”, in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  9. Marjive, R. Kumar, and L. Gupta, “Influence of Shape of Intermediate Web Stiffener in C-Lipped Cold-Formed Steel Channels on Buckling Strength.”, in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  10. Kumbhar, and R. Kumar, “Impact of Local Stiffening Effect of Staircase on Global Behavior of Structure.”, in Proceedings of International Conference on Advances in Civil Infrastructure and Development of Smart Cities, Islampur, 2016.
  11. Kriplani, O. Kumbhar, and R. Kumar “Comparison of Various Direct Displacement Based Approaches for Seismic Design.”, in Proceedings of International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  12. J. Ingole, and R. Kumar “Development of Scoring System for Seismic Vulnerability Assessment of Indian Model Building Types.”, International Conference on Emerging Technology in Structural Engineering, Nagpur, March – 2017.
  13. Yadav, D. Datta, “Comparison of Different Roof Trusses Under Wind Load”, International Conference on Emerging Technology in Structural Engineering (ETSE-2017), KDKCE Nagpur, 17-18 March, 2017
  14. Sahare, D. Datta, “Comparative Analysis of Bamboo Species as An Alternative to Steel Reinforcement”, ETSE-2017, KDKCE Nagpur, 17-18 March, 2017
  15. Thimmesh and M. D. Goel. “Blast Resistance Analysis of Door Panel”, International Conference on Emerging Technology in Structural Engineering (IC-ETSE-2017), KDK College of Engineering, Nagpur, Maharashtra, India, 17th – 18th March 2017.
  16. Palla, and M. D. Goel. “Performance Assessment of Curved Steel Wall under Blast Loading”, International Conference on Emerging Technology in Structural Engineering (IC-ETSE-2017), KDK College of Engineering, Nagpur, Maharashtra, India, 17th – 18th March 2017
  17. R. Singh, and M. D. Goel, “Numerical Simulation of Bird Strike on a Curved Plate”, International Conference on Emerging Technology in Structural Engineering (IC-ETSE-2017), KDK College of Engineering, Nagpur, Maharashtra, India, 17th – 18th March 2017.
  18. Sahu, M. Z. Ansari, D.P. Mondal, and M. D. Goel. “Finite element analysis of AA1100 elasto-plastic behaviour using Johnson-Cook model”,7th International Conference on Materials Processing and Characterization (ICMPC 2017), Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India, 17-19 March, 2017.
  19. Bajpai A., Sonparote R.S., “Development of Software for Analysis and Design of Jack Well and Pump House”, International Conference on Emerging Technology in Structural Engineering, KDK college of Engineering, Nagpur, March 17-18, 2017.
  20. Bothra S., Sonparote R.S., “Optimized Modeling of Vehicle Induced Vibration in Bridges”, International Conference on Emerging Technology in Structural Engineering, KDK college of Engineering, Nagpur, March 17-18, 2017.
  21. Rujuta Bhat and L M Gupta, “Review on Steel Beams with Web Openings” International Conference on Emerging Technology in Structural Engineering (ETSE), KDK college of Engineering & Institute for Engineering Research and Publication (IFERP), Nagpur, March 17-18, 2017.
  22. Jagdish Dhanuskar and L M Gupta, “Block Shear Failure in a steel Angle Tension Member-A Review of Design Practice” International Conference on Emerging Technology in Structural Engineering (ETSE), KDK college of Engineering & Institute for Engineering Research and Publication (IFERP), Nagpur, March 17-18, 2017.
  23. J. Vishwakarma, R. K. Ingle, “Evaluation of subgrade strength of soil below concrete pavement using non – destructive method”, Proceedings of Conference on Numerical Modelling in Geomechanics, IIT Roorkee, India, pp.21-26,3-4th March 2017.
  24. B Magade, R. K. Ingle, “Approach for Depth of Isolated Square Footing Under Static Concentric Loading”, Proceedings of Conference on Numerical Modelling in Geomechanics, IIT Roorkee, India, pp.61-66,3-4th March 2017.
  25. Meenakshi Landge R. K. Ingle, “A Review of Codes on Building Irregularities for Seismic Analysis”, International Conference on Emerging Technology in Structural Engineering, Nagpur, pp.25, India, 17th March 2017.

  1. Rajashree Kotharkar, Anurag Bagade and Anurag Kandya,‘Study of Urban Heat Island Effect using Local Climate Zone and Land Surface Temperature using Landsat 7 ETM + for Nagpur, India.’4th International Conference on Countermeasures to Urban Heat Island, Singapore, May 30 to June 1,2016
  2. Rajashree Kotharkar & Anurag Bagade, ‘Local Climate Zone Classification for Indian Cities: A Case study of Nagpur.’ 4th International Conference on Countermeasures to Urban Heat Island, Singapore, May 30 to June 1,2016
  3. Sameer Deshkar & V.Sukhawani, ‘Evolving Indicators for building socio ecological resilience of rural settlements in India.’ at 2nd Asian University Network forum on Advances in Research (ANFAIR), AGU Japan,December 21-23, 2016
  4. Shruti D. & Sameer Deshkar, ‘Planning for Climate Resilient Rural Communities: A Socio Ecological Approach’ at 2nd Asian University Network forum on Advances in Research (ANFAIR), AGU Japan, December 21-23, 2016

  1. Rajat Pandey, PrabhakarShrivas, Nitesh Punyapreddiwar and Umesh Pratap, Biocatalysed  synthesis of pyranopyrazoles, Pre- International conference on organic synthesis (Pre-ICOS) 9-10thDecmeber 2016, IISER Bhopal,
  2. Prabhakar Shrivas, Umesh R. Pratap, Synthesis of silica coated cobalt ferrite magnetic nanoparticles for catalase Immobilization”, Fourth International Conference on Nanostructured Materials and Nanocomposites (ICNM 2017) 10-12th February 2017, Mahatma Gandhi University, Kottayam.
  3. Sandipan Halder and T.V. RajanBabu, Asymmetric Hydrovinylation Reactions Catalyzed by Ru and Rh Complexes, 21st International Conference on Organic Synthesis, IIT Bombay, India, pp. 529, 11th to 16th December, 2016

  1. Nikhilesh S. Trivedi, Raju Dutta, Saurabh N. Joglekar, Jayant D. Ekhe, “An economic way for extraction of high purity biogenic silica form biomass ashes”. Poster presentation at India International Science Festival IISF 2016 NPL Delhi during Dec 8-11, 2016.
  2. Nikhilesh S. Trivedi, Rhushikesh Kharkar, S.A. Mandavgane. “Utilization of biomass char for removal of 2,4-Dichlorophenoxyacetic acid: a study using cotton plant char”. An International Conference on Separation Technologies in Chemical Biochemical, Petroleum and Environmental Engineering at Technoscape 2016 VIT, Vellore, India Oct 20-22, 2016.
  3. Chandana, S. M. Kodape, “Study on Membrane fouling Characteristics in MBR”, A National conference on PCSCRI’17 S. V. University College of Engineering, Tirupati, 84, March 10-11, 2017.
  4. Chandana, S. M. Kodape, “A review on Membrane fouling in waste water treatment”, A national Conference on Inter & Intra disciplinary Blend of Chemical Engineering, Chemix’17, VNIT, Nagpur, 65, March 25-26, 2017.
  5. Sonarkar P. R. and Chaurasia A. S. (2017). “Emission performance between traditional and improved biomass fired cook stoves using fuel wood, wood pellets and coconut shell”. Proceedings of National Conference on Inter and Intra-disciplinary Blend of Chemical Engineering (CHEMIX 2017), VNIT, Nagpur, India during March 25-26, 2017.
  6. Nanda J. and Chaurasia A. S. (2017). “Heterogenous tar cracking using different catalyst and production of syn gas”. Proceedings of National Conference on Inter and Intra-disciplinary Blend of Chemical Engineering (CHEMIX 2017), VNIT, Nagpur, India during March 25-26, 2017.
  7. Katiyar K., Iyengar S., Reddy M, Sandilya W. and Chaurasia A. S. (2017). “Hydrogen rich syngas production from biomass in fixed bed gasification using catalyst”. Proceedings of National Conference on Inter and Intra-disciplinary Blend of Chemical Engineering (CHEMIX 2017), VNIT, Nagpur, India during March 25-26, 2017.
  8. Sonarkar, P. R. & Chaurasia, A. S. (2016). “Design and Performance Evaluation of Forced Draft Cooking Stove”. Presented at International symposium & 69th annual session of IIChE (CHEMCON-2016), Chennai, December 27-30, India.
  9. D. Khonde and Chaurasia, A. S. (2016). “Kinetics study of gasification products of rice husk”. Proceedings of National Conference on Inter and Intra-disciplinary Blend of Chemical Engineering (CHEMIX 2016), VNIT, Nagpur, India during April 2-3, 2016.
  10. S. Chandane, A. P. Rathod, K. L. Wasewar, “Ex-Situ Pervaporation Reactor For Intensification Of Esterification Reaction” International Conference on Membrane Technology and its Applications (MEMSEP 2017, NIT Tiruchirappalli, India, 21-23, February 2017
  11. S. Chandane, A. P. Rathod, K. L. Wasewar, “Coupling Membrane Pervaporation for Enhanced Esterification of Lactic Acid and Isobutyl Alcohol”, CHEMCON 2016, Chennai, India, 27-30, December 2016.
  12. S. Chandane, A. P. Rathod, K. L. Wasewar, “Enhancement of Esterification Conversion using Pervaporation Membrane Reactor”, at TECHNOSCAPE 2016, VIT University, Vellore, India, October 20-21, 2016.
  13. Solankey, S. Dekate, R. N. Methekar, “Recycling of spent lithium ion batteries using Sulphuric acid leaching” , CHEMIX, 2017, Nagpur
  14. S. Madan, K. L. Wasewar, “Artificial neural network (ANN) method for modeling of benzeneacetic acid adsorption using CaO2 nanoparticles” International Conference on TECHNOSCAPE 2016, organized by Department of Chemical Engineering,   VIT Vellore, October 20–22, 2016.
  15. Velpuri V. V. Srihas, Piyush P. Wanjari and Hrushikesh M. Gade, “Molecular dynamics simulations of supramolecular self-assembled cavitands inducing conformational changes in n-alkanes following encapsulation”, Computational Science Symposium (CSS 2017), IISc Bangalore, 18 March 2017.
  16. Hrushikesh  M. Gade, Piyush P. Wanjari and Velpuri V. V. Srihas, “Molecular dynamics investigation of nanotube induced curvature changes in graphene sheet”, Computational Science Symposium (CSS 2017), IISc Bangalore, 18 March 2017

  1. Vartika Paliwal, Aniruddha D Ghare and Ashwini B Mirajkar (2016) Optimization of reservoir operation using JAYA Algorithm International Conference on Hydraulics, Water Resources ‘HYDRO 2016’, Organized by CWPRS, Pune during 8-10 December 2016.
  2. Avinash M. Badar, Valsson Varghese, Aditya Badar, Aniruddha D. Ghare (2016)Simulation of simple conical flumes in trapezoidal canals, International Conference on Hydraulics, Water Resources ‘HYDRO 2016’, Organized by CWPRS, Pune during 8-10 December 2016.
  3. D. Ghare, A. D. Lade, S. D. Kharat and A. D. Lukade (2016) Physical model studies on simple cylindrical flumes in Rectangular channel accompanied by mathematical model analysis using HEC-RAS 4.1, International Conference on Hydraulics, Water Resources ‘HYDRO 2016’, Organized by CWPRS, Pune during 8-10 December 2016.
  4. R V Ralegaonkar, H R Gavali, V V Sakhare, A Puppala, P B Aswath (2016) Application of Sustainable Construction Materials for Urban Slum Houses, Sustainable Environment and Agriculture, Asia-Pacific Chemical, Biological & Environmental Engineering Society, October 26-28, 2016 San Francisco, USA.
  5. Nikhil Kale, Mangesh Madurwar, R V Ralegaonkar (2016) Analysing the strength behaviour of cement composites with waste glass fibres, Recycle-16, International Conference on Waste Management, IIT, Guwahati, April 1-2, 2016, India.
  6. Vishakha Sakhare, Mangesh Madurwar, R V Ralegaonkar (2016) Development of sustainable bricks using agro-industrial by-products, Recycle-16, International Conference on Waste Management, IIT, Guwahati, April 1-2, 2016, India.
  7. Hindavi Gavali and R. V. Ralegaonkar (2017) Application of information modelling for resource conservation in building construction, National Conference on Interdisciplinary Trends in Engineering and Technology-17-18 February, 2017, Department of Technology, Shivaji University, Kolhapur & IEI, Kolhapur and ISTE, New Delhi.
  8. Usmani, C. Kumar, A. Nanda and A. Mandal, “Stabilization Analysis and Support Assessment in a Rockfall Zone” Geotechnical Frontier 2017, ASCE Special Publication, GSP 278, pp. 214-223.
  9. Vasudha D. Katare and M. V. Madurwar (2017) Use of textile effluent treatment plant sludge in construction, National Conference on Interdisciplinary Trends in Engineering and Technology-17-18 February, 2017, Department of Technology, Shivaji University, Kolhapur & IEI, Kolhapur and ISTE, New Delhi.
  10. Vasudha D. Katare and M. V. Madurwar (2017) application of solid wastes for the production of sustainable concrete, 3rd International Sustainable Buildings Symposium – ISBS 2017 ,15-17thMarch 2017, Dubai.
  11. Gupta, R., and Rathi, S. (2016). “Joint Consideration of Layout and Pipe Sizes for Water Distribution Network Design with Reliability”, 18th International Conference on Water Distribution Systems, WDSA 2016, ASCE, Cartagena, Colombia, July 24-28, 2016.
  12. Gupta, R. and Rathi S. (2016). “Optimal Location of Water Quality Sensors Considering Dual Objectives of Regular Monitoring and Contaminant Detection”, Annual Convention and Exposition, ACE-2016, AWWA, Chicago, June 19-22, 2106.
  13. Rathi, S. and Gupta R. (2016). “Optimal sensor locations with dual objectives of regular monitoring and contamination detection in water distribution network of BWSN”, ISH Annual Convention and International Conference, Pune
  14. Dash, S., Topre, C., Vijay and Gupta R. (2016).  Hydrodynamic simulation of Pili river for riverbed development using HEC-RAS”,  National Conference on Water Resources & Flood Management with special reference to Flood Modeling, SVNIT, Surat, October 14-15, 2016.
  15. Rathi and Gupta  R. (2017). “S-PLACE GA for optimal location of water quality sensors in water distribution networks.”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur
  16. Rathi and Gupta  R. (2017). “Equipping devices in water distribution network for smart management.”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur
  17. Sudan V. and Gupta R. (2017). “Canal Versus Pipe Water Distribution Network for Irrigation – A case study of Khangaon Branch of Lower Wardha Project.” 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  18. Amruta C.V., Dongare, S. R., and Gupta, R. (2017). “Uncertainty analysis of water distribution network using fuzzy approach.”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  19. Jadhao R. D. and Gupta, R. (2017). “Reducing leakages in water distribution network through pressure management.”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  20. Aswathy P., and Gupta  R. (2017). “Climate change and storm sewer (urban drainage) performance.”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  21. Reiva, S. and Gupta (2017). “Sewer network optimization – Models and methods”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  22. Dash, S., Vijay, R. and Gupta, R. (2017). A modelling approach for water quality assessment of Pili river usingHEC-RAS”, 49th Annual Convention of IWWA on Smart Water Management, January 18-21, 2017, Nagpur.
  23. Biji Edison and Mirajkar A. B., (2017) “Flood mitigation strategies in Kuttanad region, Kerala.” 49 th Annual Convention of IWWA on smart water management January (19 -21), 2017.
  24. Mankar M.S., Mirajkar , A. B. Patel P. L. (2016) “Sustainable irrigation planning using multi objective fuzzy optimization models. “ National Conference on Water Resources & Flood Management with special reference to Flood Modeling” October (14-15, 2016), SVNIT Surat.
  25. Mankar M.S., Mirajkar B.(2016) “Sustainable irrigation planning using multi objective jaya algorithm. “ National Conference on Water Resources & Flood Management with special reference to Flood Modeling” October (14-15, 2016), SVNIT Surat.
  26. Saranya C Nair and Mirajkar B., (2016) “Catchment yield estimation for sub basin of Wainganga using SCS-CN method. “ National Conference on Water Resources & Flood Management with special reference to Flood Modeling” October (14-15, 2016), SVNIT Surat.
  27. Vartika Paliwal, Ghare  D., Mirajkar A.B.(2016) “Optimization of reservoir operation using Jaya Algorithm.” 21st International Conference on Hydraulics,Water Resources and Coastal Engineering, December( 08-10),CWPRS,Pune.
  28. Sangeeta Pawar, Mirajkar A. B. and Patel P.L. (2016). “Optimal irrigation planning in an intuitionistic fuzzy environment” National Conference on Water Resources & Flood Management with special reference to Flood Modeling” October (14-15, 2016), SVNIT Surat.
  29. Paranjpe S.V., Katpatal Y.B. ( 2016) Lithological control in Integrated watershed management for surface and groundwater management: A case study of Venna basin, Maharashtra. National Seminar on Geosciences Research, Sagar, MP, India, Aug 2016.
  30. Newar Garima*, Katpatal Y.B., (2017) Irrigation performance evaluation within selected command areas using RS and GIS technique, 49th Annual Convention of IWWA, 19-21 Jan. 2017, VNIT Nagpur.
  31. Paranjpe V., Katpatal Y.B., Kadu, M.S.,(2017) Surface runoff estimation using SCS CN and GIS : A case study of Vena Basin, Maharashtra, India., 49th Annual Convention of IWWA, 19-21 Jan. 2017, VNIT Nagpur.
  32. Mahawar Sanjay and  Katpatal Y.B. (2017) Analyzing Impacts of Impervious Surface Area Caused by Urbanization on Surface Runoff in Nagpur Using Remote Sensing and GIS Technique, 49th Annual Convention of IWWA, 19-21 Jan. 2017, VNIT Nagpur.
  33. Singh Leelambar, Katpatal Y.B. (2017) Time series analysis of Land use and land cover and vegetation index change in Nagpur district using RS and GIS techniques , 49th Annual Convention of IWWA, 19-21 Jan. 2017, VNIT Nagpur.
  34. Patil Naman, Katpatal Y.B.  (2017) Assessment Of Groundwater Quality Through Spatial Interpolation Techniques And Correlating It With Anthropogenic Activities In Akola District, Maharashtra, 49th Annual Convention of IWWA, 19-21 Jan. 2017, VNIT Nagpur.
  35. Pathrabe Maya D., Dubey Ravish S. and Lataye Dilip H. “Removal of direct red 28 dye from aqueous solutions by using sugarcane bagasse as an adsorbent”,49th Annual Convention of Indian Water Works Association on “Smart Water Management” Organised by IWWA, Nagpur Centre at VNIT, Nagpur on January 19-21, 2017.
  36. Anuja U. Charpe, M. V. latkar, T. Chakrabarti, ‘Application of Microbiology to improve Mechanical Properties of cementitious materials’, National Conference on Research trends in Applied Science and Technology, (NCRTAST-2016), ISSN (Online) – 2249-3247, Organized by Department of Mathematics, Technocrat Institute of Technology, Technocrats TIT Group of Institutions, TIT Campus, Anand nagar, Bhopal, Madhya Pradesh, pp 64, May 6-7, 2016
  37. Aju Mathew George, & A.R.Tembhurkar “Laboratory Scale Studies On Upflow Sand Filter” 49 IWWA Annual Convention 2017 on “Smarter Water Management”, 19th  – 21st  January 2017 at Nagpur
  38. Shekhar Saxena, & A.R.Tembhurkar “Assessment Of Water Footprint For Reuse Of Wastewater In Concrete” 49 IWWA Annual Convention 2017 on “Smarter Water Management”, 19th – 21st  January 2017 at Nagpur
  39. Madhumita Chakraborty & A. R. Tembhurkar “Smart River Rejuvenation Plan For Ailing River; Issues And Solutions” 49 IWWA Annual Convention 2017 on “Smarter Water Management”, 19th  – 21st  January 2017 at Nagpur
  40. Mable Mathew ,Aju Mathew George & Ajay.R.Tembhurkar, “Evaluation of Equilibrium, Kinetic and Thermodynamic Parameters for Deflouridation of Water Using Adsorbent  Developed from Teak (Tectona Grandis) Leaf” International Conference on Recent Advance in Civil  and Environmental Engineering (RACEE 2017)  on 4th and 5th March 2017, at WCE Sangli
  41. Shekhar Saxena, A.R.Tembhurkar , “Utilization of Steel Slag as Coarse Aggregate Replacement and its influence on Strength of Concrete” International Conference on Recent Advance in Civil  and Environmental Engineering (RACEE 2017)  on 4th and 5th March 2017, at WCE Sangli

  1. Imran and Praveen Kumar, Human action recognition using RGB-D sensor and deep convolutional neural networks, International Conference on Advances in Computing, Communications and Informatics (ICACCI), Jaipur, 144-148, September 2016
  1. Arsh, A. Bhatt and Praveen Kumar, Distributed image processing using Hadoop and HIPI, International Conference on Advances in Computing, Communications and Informatics (ICACCI), Jaipur, 2673-2676, September 2016
  1. Mishra, R. Garg, A. Kumar, A. Gupta and Praveen Kumar, Song year prediction using Apache Spark, International Conference on Advances in Computing, Communications and Informatics (ICACCI), Jaipur, 1590-1594, September 2016
  1. Nar, A. Singal and Praveen Kumar, Abnormal activity detection for bank ATM surveillance, International Conference on Advances in Computing, Communications and Informatics (ICACCI) Jaipur, 2042-2046, September 2016.
  1. Anup Kelkar & Anil Mokhade, Nifty Auto Index Prediction on the basis of Tweets Sentiments, 8th Annual Internatioal Conference on ICT: Big Data, Cloud and Security (ICT-BDCS2016), Singapore, 101-106, 22-23 Aug 2016 GSTF Journal on Computing Vol5, Issue 1
  1. Krishan Kumar and M.P. Kurhekar, Economically Efficient Virtualization over Cloud Using Docker Containers, Cloud Computing in Emerging Markets (CCEM), 2016 IEEE International Conference Bangalore, 95-100, 19/10/2016
  1. A. Ansari, U.A.Deshpande, S.P.Mohammad, An asynchronous algorithm for providing energy efficient coverage and connectivity in wireless sensor networks , Tenth International Conference on Advanced Networks and Telecommunication Systems, 2016. ANTS’16 , Bengaluru, Available Online on ieee explore, November 2016
  1. R. Penuarkar, U.A.Deshpande, OPPRES: Opportunistic Routing algorithm for routing messages in Emergency Situations using Vehicular Delay Tolerant Network, Tenth International Conference on Advanced Networks and Telecommunication Systems, 2016. ANTS’16, Bengaluru, Available Online on ieeeexplore, November 2016
  1. Mansi A. Radke, Geotagging Web Documents using A geometrical approach for Geographical Information Retrieval (Poster) , IAPR summer school, Jaipur, N/a, Jan 2017
  1. Krishan Kumar and Dipti Shrimankar, Equal Partition based Clustering approach for Event Summarization in Videos , 12th IEEE International Conference on Signal Image Technology & Internet Based Systems (SITIS-2016),, Naples, Italy, 119 – 126,  DOI 10.1109/SITIS.2016.27 978-1-5090-5698-9/16 $31.00 © 2016 IEEE
  1. Shital Raut, Maind A., Comparative Analysis and Evaluation of Biclustering Algorithms for Microarray Data, , International Conference on Recent Advancement in Computer, Communication and Computational Sciences(ICRACCCS-2016), Janardan Rai Nagar Rajasthan Vidyapeeth University, Udaipur, INDIA , , 25-26 Nov 2016
  1. Poonam Sharma, K.V.Arya, R.N.Yadav, Face Recognition from Video using Generalized Mean Deep Learning Neural Network, 4th International Symposium on Computational and Business Intelligence, 2016, Olten, Switzerland, 195-199, 5-7 Sept. 2016
  2. Anmol Shukla , Dhruv Aggarwal, Ravindra B. Keskar, A Methodology to Detect and Track Breaking News on Twitter, ACM Compute, Gandhinagar, 133-136, October 21 – 23, 2016 
  1. D.Naik, M.K.Khedkar, S.S. Bhatt, “Effect of Generator Reactive Power Limit on Proximity to Voltage Insatbility of Multibus Power System”, IEEE International Conference on Industrial Electronics and Applications (ICIEA 2017) Siem Reap,  Cambodia; 18th to 20th June, 2017 (Paper Accepted for Presentation)
  1. Bharat Singh; Sandeep Pandey; Anjali Junghare; Mohan Aware Design of an Anti-windup Fractional Order PI Controller based on Integral State Predictor within stability bound’, Int. Conf .IEEE Power Electronics, Intelligent Control and Energy System-ICPEICES 2016, 4-6 July ,Delhi 2016.
  1. Ruchi Jain, A.S.Junghare, Mohan V. Aware, “Tuning of Fractional Order PID Controller Using Particle Swarm Optimization Technique for DC Motor Speed Control”, Int. Conf. IEEE Power Electronics, Intelligent Control and Energy System ICPEICES 2016, 4-6 July ,Delhi 2016.
  1. Apkeshit Bhowate and Mohan V. Aware, “CMV suppression using a new predictive direct torque control for Induction Motor” Seventh IEE India International Conference on Power Electronics-IICPE 02016., Nov 17-19, 2016,Patiala,.
  1. Jaya H. Agrawal;Mohan V. Aware, “Photovoltaic simulator developed in LabVIEW for evolution of MPPT techniques”2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), Pages: 1142 – 1147, DOI: 1109/ICEEOT.2016.7754863.
  1. Yogesh Tatte and Mohan V. Aware, “Performance Improvement of Three-Level Five-Phase Inverter Fed DTC Controlled Five-Phase Induction Motor During Low-Speed Operation” IEEE Conference on Power Electronics ,Drives and Energy Systems, PEDES , 14-19 Dec. 2016, Trivandrum India.
  1. Sohit Sarma and Mohan V. Aware, “A Split Three Phase Induction Motor for Battery Charging Application”, ” IEEE Conference on Power Electronics ,Drives and Energy Systems, PEDES , 14-19 Dec. 2016,Trivandrum India.
  1. Jay Pandit and Mohan V. Aware, “Direct Torque Control of Asymmetric Six-Phase Induction Motor With Reduction in Current Harmonics”, ” IEEE Conference on Power Electronics ,Drives and Energy Systems, PEDES , 14-19 Dec. 2016, Trivendrum India..
  1. Nareshkumar, M. R. Ramteke and H. M. Suryawanshi, “Closed-loop control of current-fed full-bridge parallel resonant soft-switched dc-dc boost converter for PV applications,” IECON 2016 – 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, 2016, pp. 2462-2467.doi: 10.1109/IECON.2016.7793800
  1. Naresh kumar Reddi, M.R.Ramteke, H.M.Suryawanshi, K and .P.Gawande,  ” Multiport DC-DC Boost Converter with Zero-Current Switching,”  ieee international conference on power electronics, drives and energy systems (pedes), 14-17 December 2016.  Trivandrum, Kerala, India.
  1. P. Gawande, M. R. Ramteke. Sachin Padeshi, P.D. Debre, B. Y. Bagde, “Capacitor Voltage Balancing Techniques for Three Level Capacitor Clamped Multilevel Inverter under Load Compensation” IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 14-17 December 2016. Trivandrum, Kerala, India.
  1. Chaitanya N. Jibhakate, Madhuri A. Chaudhari , Mohan M. Renge. “Power Factor Improvement Using Nine Switch AC-DC-AC Converter”, proc. 6th IEEE International Conference on Power Systems, 2016 (ICPS 2016).
  1. Chaitanya N. Jibhakate, Madhuri A. Chaudhari , Mohan M. Renge. “Nine Switch Controlled Induction Motor Drive with Unity and Leading Power Factor”,proc. 2nd IEEE International Conference on Electrical, Computer and Communication Technology, 2017 (ICECCT 2017).
  1. Kushal A., Kanhav,  Madhuri A. Chaudhari, “A reliable multiple input dc-dc converter for hybrid power system,” in Proc. of 2nd  IEEE International Conference on Electrical, Computer and Communication Technology, 2017 (ICECCT 2017), pp. 302-309, 23 Feb. 2017.
  2. Rachakonda Shri Rama Akshay and Madhuri A. Chaudhari, “Direct Torque Control of PM BLDC Motor Using Fuzzy Controllers”, proc. in IEEE sponsored  4th  International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS) 2017.
  3. C. B. Khadse, M. A. Chaudhari and V. B. Borghate, “Laboratory set up for power quality disturbance generator and its application in real time power quality monitoring,” (WIECON), Pune, Dec. 19- 21 2016.
  1. Varun Dourla,Sandeep Pandey,A.S.Junghare, “Design and Analysis of Dynamic Sliding Mode Control for Magnetic Levitation System,” 4thIEEE International Conference on Power, Control and Embedded Systems (ICPCES), MNNIT, Allahabad, pp. 1-6, 9-11 March, 2017.
  2. Arjun C. Unni, A. S. Junghare, Vivek Mohan, and Weerakorn Ongsakul. “PID, fuzzy and LQR controllers for magnetic levitation system,” In IEEE International Conference on Cogeneration, Small Power Plants and District Energy (ICUE), pp. 1-5, 2016.
  3. V. Jain, A. S. Junghare, “Tuning of Fractional order PID Controller using Particle Swarm Optimization Technique for DC Motor Speed Control” In IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, July 4-6, 2016.
  4. Bharat Singh, Sandeep Pandey, A. S. Junghare, M.V. Aware, “Design of Anti-windup Fractional order PI Controller based on Integral State Predictor within Stability Bound” In IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems, July 4-6, 2016.
  5. Shimin V V., Shah V.A. and Lokhande  , 2016,. Material Selection for Semiconductor Switching Devices in Electric Vehicles using Analytic Hierarchy Process (AHP) Method. Power Electronics, Intelligent Control and Energy Systems Conference Proceedings (ICPEICES), 2016 IEEE International. IEEE, July 2016.
  6. Shimin V V., Shah V.A., and Lokhande M., 2016,. Advanced Material Selection for Semiconductor Switching Devices in Electric Vehicles using PROMETHEE Method. 13th IEEE Vehicle Power and Propulsion Conference (VPPC), 2016 IEEE International. IEEE, October  2016.
  7. Shimin V V., Shah V.A., and Lokhande M., 2016,. Electric Vehicle Batteries; A Selection based on PROMETHEE Method.7th Power India International Conference (PIICON), 2016 IEEE International. IEEE, November  2016.
  8. Gor, V.A. Shah, and M. M. Lokhande, “ Comparison of 3-Phase and 5-Phase Induction Motor Performance for Electric Vehicle Motor Selection” Proceedings of 29th International Electric Vehicle Symposium and Exhibition (EVS29), Montreal, Canada, pp 695-706, Vol. 1, 19th to 22nd  June 2016, ISBN: 978-1-5108-3270-1,
  9. Gujarathi, V.A.Shah, M.M.Lokhande “EV and INDIA: Market Analysis with Consumer Prespective, Policies and Issues” Proceedings of 29th International Electric Vehicle Symposium and Exhibition (EVS29), Montreal, Canada, pp 1079-1090, Vol. 1, 19th to 22nd  June 2016, ISBN: 978-1-5108-3270-1,
  10. Patel, V. A. Shah, and M. M. Lokhande “ A Mathematical and Fem Design of Novel Axial Field Switched Reluctance Motor For Electrical Vehicle (EV) Application” Proceedings of 29th International Electric Vehicle Symposium and Exhibition (EVS29), Montreal, Canada, pp 783 – 792, Vol. 1, 19th to 22nd  June 2016, ISBN: 978-1-5108-3270-1,
  11. Shimin V.V., V. A. Shah, and M. M. Lokhande, “Selection of Semiconductor Material for Power Electronics Switching Devices in Electric Vehicles using TOPSIS Method”  Proceedings of 29th International Electric Vehicle Symposium and Exhibition (EVS29), Montreal, Canada, pp 758 – 770,   1, 19th to 22nd  June 2016, ISBN: 978-1-5108-3270-1,
  1. Nisha Deshmukh, Amandeep S Bedi, N R Patne, “Analysis of distance protection performance for line employing UPFC, IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES)”, Delhi Technological University, 4-6 July 2016.DOI: 10.1109/ICPEICES.2016.7853418
  1. Amandeep S Bedi, N R Patne. Piyush M Khadke.G A Shinde, “Analysis of shunt reactor energization at EHV substation and its effects on CT: A case study”, IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES)”, Delhi Technological University, 4-6 July 2016. DOI: 10.1109/ICPEICES.2016.7853420
  1. Piyush M. Khadke, Nita R. Patne and Gulab A. Shinde, “ Co-ordination of spark gap protection with MOV in EHV transmission line with FSC”, IEEE EIECON-2016, 19 Dec-21 Dec 2016, Pune.
  2. Ravikiran, R.K. Keshri, and M.M. Santos, “Inductive Characteristics of Asymmetrical Coils for Wireless Power Transfer”, in Proceedings of IEEE ICIT 2017, pp. 538-542, Ontario, Canada
  3. Kadwane, A. Kadu, R. Keshri, and M. Santos, “Z-source Based Multilevel Inverter for Reducing Partial Shading Effect in Solar System,” in Proceedings of IEEE ICIT 2017, Ontario, Canada.
  4. K. Keshri, S.G. Kadwane, J. Kumbhare and S.P. Gawande, “Ripple free deadbeat control of DC-DC buck converter for distributed generators,” in Proceedings of IEEE IECON 2016, pp. 6572-6577, Florence, Italy
  5. A. Arruda, M.M. Santos and R.K. Keshri, “A comparative study of performance for Electric Vehicles for wheel traction configurations,” in Proceedings of IEEE ISIE 2016, pp. 786-792, Santa Clara, Canada.
  6. Trivedi and R. Keshri, “Trajectory based Predictive control of Permanent Magnet Brushless DC Motor Drive”, in Proceedings of IEEE PEDES 2016, Kerala, India
  7. K. Sinde, S.G. Kadwane, S.P. Gawande, and R.K. Keshri,“Solar PV Emulator for Realizing PV Characteristics under Rapidly Varying Environmental Conditions”, in Proceedings of IEEE PEDES 2016, Kerala, India.
  8. G.Kadwane, S. Venkatesan, U.K. Sinde, S.P. Gawande, and R.K. Keshri,“Investigation of Dynamic Performance of Grid Connected Z-Source Inverter Based Distributed Generation”, in Proceedings of IEEE PEDES 2016, Kerala, India.
  9. Ashish Patel and Pradyumn Chaturvedi, “Performance of SRF-UVTG based UPQCDG for Integration of Solar PV with Non-linear Loads”, IEEE PEDES 2016, 14-17 Dec 2016, Trivandrum, India, Paper ID 280.
  10. Satish Rai, Pradyumn Chaturvedi and Shimi S L, “SHE-PWM Based Multilevel T-Type Inverter Topology for Single-Phase Photovoltaic Applications”, IEEE PEDES 2016, 14-17 Dec 2016, Trivandrum, India, Paper ID 313.
  11. Ravinder Kumar, Pradyumn Chaturvedi, Hari Om Bansal and Pawan K. Ajmera, “Adaptive Artificial Neural Network Based Control Strategy for Shunt Active Power Filter”, IEEE ICEPES 2016, 14-16 Dec 2016,  MANIT, Bhopal, India, Paper ID 081.
  12. K. Rai, P. Chaturvedi, S. L. Shimi and S. Dwivedi, “A novel six level inverter for single-phase stand-alone photovoltaic system”, 2016 18th European Conference on Power Electronics and Applications (EPE’16 ECCE Europe), Karlsruhe, Germany, 2016, pp. 1-8.
  13. Niloy Patari, Arghya Mitra and Dheeman Chatterjee, “Improvement of transient stability of power systems by output power control of PMSG-based wind farm,” Poster presentation at 15th Wind Integration Workshop (WIW16), Vienna, Austria, Nov. 2016.
  1. Jaiswal, Supriya, M. G. Wath, and Makarand S. Ballal. “Modeling the measurement error of energy meter using NARX model.” In Instrumentation and Measurement Technology Conference Proceedings (I2MTC), 2016 IEEE International, pp. 1-6. IEEE, 2016.
  2. Vilhekar, Tushar Gulabrao, Makarand Sudhakar Ballal, and Bhimrao S. Umre. “Application of Sweep Frequency Response Analysis for the detection of winding faults in induction motor.” In Industrial Electronics Society, IECON 2016-42nd Annual Conference of the IEEE, pp. 1458-1463. IEEE, 2016.
  1. Jaiswal, Gajanan C., D. R. Tutakne, Makarand Sudhakar Ballal and Akhil Sai PK. “Oil level assessment of Distribution Transformer by development of Capacitance Model.” In Power Systems (ICPS), 2016 IEEE 6th International Conference on, pp. 1-5. IEEE, 2016.
  1. M.G.Wath,P.Raut and M.S.Ballal, “Error compensation method for current transformer,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, India, 2016.
  2. G. N. Surya, Z. J. Khan and M. S. Ballal, “Radial flux signature analysis for identifying source unbalance and stator turn fault in cage motors using radial flux sensing coil,” 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, India, 2016.
  3. G. Surya, Z. J. Khan and M. S. Ballal, “Classification of magnetic circuit asymmetry due to source supply unbalance, load variations and stator turn fault in induction motors using observer coil technique,” 2016 IEEE Region 10 Conference (TENCON), Singapore, 2016.
  4. A. R. Kulkarni, S. S. Rajurkar and M. S. Ballal, “Indian experience of utilisation of Synchrophasor system and its integration with Situational Awareness system,” 2016 IEEE 6th International Conference on Power Systems (ICPS), New Delhi, 2016, pp. 1-6.

  1. Mayur Parate, Saugata Sinha, K.M. Bhurchandi. Integral Channel Feature based Arbitrary Object Tracking. Accepted for publication in NCC 2016.
  1. Arjun Raj Rajanna, Raymond Ptucha, Saugata Sinha, Navalgund A. Rao. Prostate cancer detection using photoacoustic imaging and deep learning. Accepted for publication in IS&T International Symposium on Electronics Imaging 2016.
  1. Aniket Borkar, Saugata Sinha, Bhargava Chinni, Vikram Dogra, Navalgund Rao, A.G. Keskar, “Diagnosis of Prostate Cancer with Support Vector Machine using Multiwavelength Photoacoustic images”,4th International Conference on Control, Decision and Information technologies, CoDIT’17. Accepted for publication.
  1. Anju Beck, Saugata Sinha, Bhargava Chinni, Vikram Dogra, Navalgund Rao, A.G. Keskar,” Prediction of Prostate Cancer using Logistic Regression Model with Multiwavelength Photoacoustic Data”, 4th International Conference on Control, Decision and Information technologies, CoDIT’17. Accepted for publication.
  1. Naveen, V. R. Satpute, ” Image Encryption Technique Using Improved A5/1 Cipher on Image Bitplanes for Wireless Data Security”, 2016 International Conference on Microelectronics, Computing and Communications, MicroCom-2016, NIT Durgapur, India.
  1. Sneha Kadu, Ch. Naveen, V. R. Satpute, A. G. Keskar, “­­­­­Discrete Wavelet Transform Based Video Watermarking Technique”, 2016 International Conference on Microelectronics, Computing and Communications, MicroCom-2016, NIT Durgapur, India.
  1. SnehaKadu, Ch. Naveen, V. R. Satpute, A. G. Keskar, “A Blind Video Watermarking Technique using Discrete Wavelet Transform”, IEEE Students’ Conference on Electrical, Electronics and Computer Science (SCEECS), 2016, NIT Bhopal, India.
  1. Aditya Gupta, V. R. Satpute, K. D. Kulat, Neeraj Bokde, “Real-Time Abandoned Object Detection Using Video Surveillance”, Proceedings of the International Conference on Recent Cognizance in Wireless Communication & Image Processing, pp 837-843 .
  2. Mahesh Sawarbandhe, Bhaskara Naik S., Vishal Satpute and Saugata Sinha, “Coaxial Antenna for Microwave Ablation”, 2016 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER), 13-14 August 2016, NITK, Surathkal, India.
  1. Saiyma Fatima Raza, Ch. Naveen, V. R. Satpute, A. G. Keskar, “A Proficient Chaos Based Security Algorithm for Emergency Response in WBAN System”, 2016 IEEE Students’ Technology Symposium (IEEE TechSym 2016), 30 September – 2 October, 2016, IIT Kharagpur, India.
  1. Sneha Kadu, Ch. Naveen, V. R. Satpute, A. G. Keskar, “Compressed Domain Video Watermarking using EZW and Chaos”, Accepted at IEEE TENCON 2016 — Technologies for Smart Nation, 22 – 25 November 2016, Marina Bay Sands, Singapore.
  1. Naveen, Saiyma Fatima Raza ,V.R. Satpute, “Multi key Algorithm for Performance Enhancement of Video Encryption”, 11thInternational Conference on Industrial and Information Systems (ICIIS 2016), 3-4 December 2016, IIT Roorkee, Uttarakand. in press
  1. Neha K Nawandar, Vishal R Satpute, “CORDIC based Novel Energy-efficient approximate DCT architecture for Error-resilient Applications”, 11thInternational Conference on Industrial and Information Systems (ICIIS 2016), 3-4 December 2016, IIT Roorkee, Uttarakand. in press
  1. Neha K Nawandar, Cheggoju Naveen, Saiyma Fatima Raza, V. R. Satpute, “PEARL: Power Efficient Adaptable and Robust LUT based Chaotic Security Algorithm for Communication in Agricultural Apps”, INDIAcom-2017. in press

 

  1. Pranjali Gajbhiye, Cheggoju Naveen, Vishal R Satpute, “Underwater Image Enhancement using NTSC Color Model”, INDIAcom-2017. in press
  1. Radhika Swarnkar, Shyam Prasad PM, AG Keskar, NC Shivprakash “A new approach to detect P300 in a single trial based on PCA and SVM classifier” IEEE Conference Region 10 Symposium (TENSYMP), Pages 355-360, Indonesia,2016
  1. S Gupta, K M  Bhurchandi, AG Keskar “An efficient noise-robust automatic speech recognition system using artificial neural networks” International Conference on Communication and Signal Processing (ICCSP),Pages 1873-1877,Madras,India, 2016
  1. Shrivastava, Khyati, Kulat, Kishore. “Scalability analysis of Homogeneous broad transmission distance protocol (HM-BTDP) for energy efficient communication in wireless sensor network”, Conference of IEEE UP section Electrical, Computer & Electronics Engineering, (2016).
  1. Shrivastava, Khyati, Kulat, Kishore. “Energy Efficient Scalability of Heterogeneous Broad Transmission Distance Protocol (HT-BTDP) in WSN for Internet-of-Things”, International Conference on Control, Decision and Information Technologies, Spain, (2017).
  1. Pavan Kumar Pedapolu, Pradeep Kumar, Vaidya Harish, SatvikVenturi, Sushil Kumar Bharti, Vinay Kumar,andSudhir Kumar, Mobile Phone User’s Speed Estimation using WiFi Signal-to-Noise Ratio, ACM MobiHoc, IIT Madras, India, 2017
  1. Sudhir Kumar, Rishabh Dixit and Rajesh M. Hegde, Second Order Cone Programming based Localization Method for Internet of Things, International Conference on Control, Decision and Information Technologies (CoDIT), IEEE, Barcelona, Spain, 2017
  1. Tarun, V. Kumar, Sudhir Kumar, M. Jajoo, S. Rahman, J. Sengupta, GPS-GSM based Rail Signaling and Tracking System, International Conference on Control, Decision and Information Technologies, (CoDIT), IEEE, Barcelona, Spain,  2017.
  1. Shubham Yadav Ashwini  Pohekar  Surender “Performance Monitoring System for driver with light motor vehicle (LMV) learner’s license”. 12-13,AUG 2016.  10.1109/ICCUBEA.2016.7860119
  1. Pradhnya Arun Priyadarshi and Surender Kannaiyan “Estimation of Human Heart Activity UsingEnsemble Kalman Filter” February 2017 Sensors & Transducers
  1. Shubham Yadav, Ashwini Pohekar and K. Surender “Training and Performance Analysis System for Car Drivers Using Fuzzy Logic System “March 2017 Far East Journal of Electronics and Communications
  1. Vivek Munde, Joydeep Sengupta, Vinay Kumar      “Design of a via-less, compact CPW-fed ZOR Antenna for WLAN Applications “Twenty Third National Conference on Communications (NCC 2017)March2017
  1. Anvesh Kumar, A. S. Gandhi, “A Compact Novel Three-Port Integrated Wide and Narrow Band Antennas System for Cognitive Radio Applications,” International Journal of Antennas and Propagation, vol. 2016, Article ID 2829357, 14 pages, 2016.  Dec 2016 doi:10.1155/2016/2829357.
  1. Haichao Wang, Guoru Ding, Jinlong Wang, Le Wang, Theodoros A. Tsiftsis and Prabhat Kumar Sharma,“Resource Allocation for the Energy Harvesting-Powered D2D Communication Underlaying Cellular Networks”, to appear in IEEE International Conference on Communications (ICC), Paris, France, May 2017.
  1. Ankur Bansal, Prabhat Kumar Sharma, and Manav Bhatnagar,“A Quartic Mixture Distribution and Its Application to ML Decoder Based Analysis of FSO Systems”, to appear in IEEE International Conference on Communications (ICC) Workshops, Paris, France, May 2017.
  1. Sutar, Rajendra G. and Ashwin G. Kothari. “A low-cost Diagnostic Support System for remote cardiac healthcare.”Biomedical Robotics and Biomechatronics (BioRob), 2016 6th IEEE International Conference on. IEEE, 2016.
  1. Bhurane, Ankit A., et al. “Spectral approaches for motion intensity estimation in video coding.” Communication (NCC), 2016 Twenty Second National Conference on. IEEE, 2016.

  1. Vandana Jain, Rajendra M. Patrikar,  “Real Time Droplet Velocity Measurement using open source Computer Vision for EWOD Device”,  Eighth ISSS National Conference on MEMS, Smart Materials, Structures and System, 28th-30th September 2016,  IIT Kanpur
  2. Amol Morankar and Rajendra M. Patrikar, “RF MEMS Band Pass Filter”, of 3rd International Conference on Emerging Electronics (ICEE), December 27-30, 2016, IIT Bombay, India
  3. Ravi Solanki, Ashutosh Mahajan and Rajendra M. Patrikar, “Finite Element Modeling of Retention Process in high-k Interpoly Dielectric Nanocrystal Flash Memories”, of 3rd International Conference on Emerging Electronics (ICEE), December 27-30, 2016, IIT Bombay, India
    1. Ganesh C. Patil “Comparative Analysis of Partial Buried Oxide Germanium -on -insulator p -Channel MOSFETs”, Proc. of 3rd International Conference on Emerging Electronics (ICEE), December 27-30, 2016, IIT Bombay, India
  1. Shilpa Bisen, Yogesh Deshpande, published in the conference preceding of An analytical study of Smartphone Addiction: A gender differences, presented in 4th International conference on recent trends in research and higher education on 12-14 November 2016 in Jabalpur.
  1. Praveen kakada, Yogesh Deshpande, Corporate Social Responsibility Impact on Organization Performance: Higher Technical Educational System, UGC-Three days international conference on Corporate Social Responsibility (ISCSR–2017), 10th–12th March, 2017 (ISBN:978-93-85518-07-2) Acharya Nagarjuna University, Guntur, A.P.
  2. Umesh Guramwar, Dr. M. Ghosal, Conflicts of Values in Manju Kapur’s Novel, Difficult Daughters, Two days National Conference on Professional Ethics and Human Values, Nagpur (ISBN:978-93-83139-34-7) 18 & 19 Dec, 2016.
  3. Hemangi, Patil, Dr. M. Ghosal M, Feminism Egalitarian to Humanism, Two days National Conference on Professional Ethics and Human Values, Nagpur (ISBN:978-93-83139-34-7) 18 & 19 Dec, 2016.
  4. Praveen Kakada, Yogesh Deshpande, Human Approach to System approach: Higher education system, Two days national conference on Professional Ethics and Human Values, Nagpur (ISBN: 978-93-83139-34-7) 18 & 19 Dec, 2016.
  5. Shilpa Bisen, Yogesh Deshpande, published in conference proceeding of Matrix of changing Human Values: Understanding Internet Addiction, in Two days national conference on Professional Ethics and Human Values (ISBN:978-93-83139-34-7) 18 & 19 Dec, 2016, VNIT, Nagpur
  6. Hemangi, Patil, Dr. M. Ghosal, Cultural Impediments to Women Empowerment, at the

National Seminar, Re-Thinking Empowerment: Gender and Development in India,

organized by Association of Indian Universities, New Delhi and Department of Women

Education, Maulana Azad National Urdu University, Hyderabad on 19th to 20th

September, 2016.

  1. Hemangi, Patil and Dr. M. Ghosal, A Study of Desai’s Novels: A Humanistic Approach, International Conference on Literature, Culture and World Peace, organized by Higher Education and Research Society, Mumbai on 23 -24 September 2016 at Pune.
  2. Umesh Guramwar, Dr. M. Ghosal, Reading Cultural Traits in Manju Kapur’s Novel, Immigrant, International Conference on Literature, Culture and World Peace, organized by Higher Education and Research Society, Mumbai on 23 -24 September, 2016 at Pune.
  3. Hemangi, Patil, Dr, M. Ghosal, Indian Women: Insider but an Outsider. International Conference on Language ,Literature and Culture: New Horizons, organized by Department of English Moolji Jetha College, Jalgaon on 6th and 7th January, 2017.
  4. Umesh Guramwar, M. Ghosal, Conflicts of Values in Manju Kapur’s Novel, Difficult Daughters, Two days National Conference on Professional Ethics and Human Values, Nagpur (ISBN:978-93-83139-34-7) 18 & 19 Dec, 2016.
  5. Hemangi, Patil, Dr. M. Ghosal, Feminism Egalitarian to Humanism, Two days National Conference on Professional Ethics and Human Values, Nagpur (ISBN:978-93-83139-34-7) 18 & 19 Dec, 2016.
  6. Dr. G. N. Nimbarte, Necessity of Ethics and Globalization World Congress and International Conference on Interrelationship among, Arts, Culture, Humanities, Religion, Education Ethics, Philosophy, Spirituality, Science and Society for Holistic Human Development organized by Krishi Sanskriti Publications on 25th September, 2016 held in JNU, New Delhi.

14.Dr. G.N. Nimbarte, The Holistic Development of Rural Society in India through Education, 42nd All India Sociological International Conference on Rethinking Sociological Traditional in India, organized by All India Sociological Society, held at Tezpur University, Assam on December 27-30, 2016.

15. Dr. G.N. Nimbarte, G.N, Adivasinche Smajik V Sanskrutik Jivan Ajcha Sandarbhat, National Conference on Adivasi Samaj:Prashana Ani Avhane, organized by Marathi Samajshastra Parishad association with Mulji Jetha Collge Jalgaon on 3-4 February, 2017.

Ankush Raje and M. Devakar, Flow and heat transfer of two immiscible mocropolar and Newtonian fluids between parallel plates, Presented by Ankush Raje in ISTAM-2016 (An International Meet) at VIT Vellore University, Vellore, December 2016

  1. Jhunjhunwala P, P.M. Padole, S. B. Thombre,”Effect of stenosed models on Assessment of severity of stenosis: CFD study”,Proceeding: XII IPRoMM, NagpurRanjan Kishore Mallick, Thombre S B,”Effect of compressive force by clamping torque on performance of DMFC,Proceeding: XII IPRoMM, Nagpur,22 and 23 Dec,2016.
  1. Thantharate Shahu V, Thombre S.B.,”Renewable Technologies in membrane desalination- A’, Review”, Proceeding: XII IPRoMM, Nagpur,22 and 23 Dec, 2016.
  1. Rohan R Pande, Kiral Bobbala and Vilas Kalamkar,”CFD analysis of natural convection rocket typr biomass”,FMFP2016, MNIT, Allahabad 15-17 Dec,2016.
  1. Rohan R Pande, Vilas Kalamkar, Arunendra K Tiwari, Sanjay K Sharma,” A field survey on multiport (two- pot) biomass cookstove over entire division of Maharastra, India”, IPRoMM VNIT, Nagpur 22-23 Dec,2016.
  1. Arunendra K Tiwari, VilasKalamkar, Rohan R Pande Sanjay K Sharma,”Numerical Analysis of tandem airfoils for sub-sonic axialflow compressor blades”,IPRoMM, VNIT, Nagpur,22-23 Dec2016.
  1. Sanjay K Sharma, VilasKalamkar, Rohan R Pande, Arunendra K Tiwari,” Heattransfer performance of Chamfered ribs roughened solar air heater”,IPRoMM, VNIT, Nagpur,22-23 Dec,2016.
  1. G.Suryawanshi,”Invistigation on SI Engine using Hydrogen CNG blends”,2ndInternational Conference on Mechanical and Aeronautical Engineering (ICMAE 2016),Hong Kong,28 – 30 Dec,2016.
  1. Vinay Thute and Atul Andhare, “Induction motor inter turn fault severity classification using vibration data and artificial neural network”,12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016,VNIT Nagpur,22-23 December,2016.
  1. Yogesh Deshpande and Atul Andhare,”Optimization of Cutting Parameters Using Cryogenically Treated Insert in Turning of Inconel 718 Using Response Surface Methodology”,12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016,VNIT Nagpur 22-23 December,2016.
  1. Ramesh Pungle and Atul Andhare,”Position and path control of AGV by global vision sensor”,12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016VNIT Nagpur22-23 December,2016.
  1. V. Kane and A. B. Andhare,”Design and development of intelligent diagnostic system for end of assembly line inspection of gearbox”,12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016,VNIT Nagpur22-23 December,2016.
  2. Neelesh Kumar Sahu, Makarand Channe and Atul Andhare,” Multi sensor tool condition monitoring in end milling of Ti-6Al-4V”,12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur,22-23 December,2016.
  1. Neelesh Kumar Sahu, and Atul Andhare,”Minimization of surface roughness for milling of Ti-6Al-4V using response surface methodology”, 12th National workshop on Industrial Problems on Machines and Mechanisms- IPRoMM 2016, VNIT Nagpur,22-23 December,2016.
  1. Vinay Thute and Atul Andhare,”Artificial neural network application for diagnosis of inter turn and ball bearing faults in an induction motor with vibration data”,International Conference on Condition Monitoring, ICCM-2016 GITAM University, Vizag,26-27 October,2016.
  1. Atul Andhare, Devarsh Gupta, Govind Patel, Sidhanshu Khursange, Saiprasad Mukdadw,” Noise reduction in portable drilling machine”,International Conference on Condition Monitoring, ICCM-2016GITAM University, Vizag26-27 October2016.
  2. Prasad Kane and Atul Andhare,”On line intelligent multi fault diagnosis using virtual instrumentation for end of assembly line inspection for gearbox”,International Conference on Condition Monitoring, ICCM-2016GITAM University, Vizag26-27 October 2016.
  1. Abhishek Thote, Rashmi Uddanwadiker, Sunita Shrivastava and Krishna Sharma,” Optimum criteria for intrusion of a maxillary central incisor in lingual orthodontics: a numerical study”,Asia-Pacific Conference on Life Sciences and Biological Engineering (APLSBE) Nagoya, Japan 29-31 March,2017.
  1. Shubham Ramteke, Dr. Rashmi Uddanwadiker, Aneesh Kale, Gaurav Gupta, Dr. Rajendra Saoji,” Gastrostomy Feeding Button -Design and Development of Gastrostomy Feeding button”,2nd International Conference and Expo on Biomechanics and Implant Design,Las Vegas, Nevada, USA,07-09 November, 2016.
  1. Veer Alakshendra, Shital S. Chiddarwar,”Robust Adaptive Control of Mecanum Wheel Mobile Robot: Simulation and Experimental Validation”,IEEE/RSJ International Conference on Intelligent Robots and Systems,Daejeon, Korea,October 9-14,2016.
  1. Saumya Ranjan Sahoo, Shital S. Chiddarwar,”Dynamic modelling of four-wheel skid mobile robot by unified bond graph approac”, International Conference on Robotics: Current Trends and Future Challenges (RCTFC),Tanjavur, India, December 19-20,2016.
  1. Parag Khanna, Khushdeep Singh, K.M. Bhurchandi and Shital Chiddarwar,” Design Analysis and Development of Low Cost Underactuated Robotic Hand”,           ROBIO-2016, IEEE, International Conference on Robotics And Biomimetics Q ingdao, China, December 3-7, 2016.
  1. Akash Singh, Anshul Paigwar, Saiteja Manchukanti, Manish Saroya, Manish Maurya, Shital Chiddarwar,”Design and Implementation of Omni-directional Spherical MOdular Snake robot”, (OSMOS) IEEE International Conference of Mechatronics ICM-2017Gipssland,Australia,February 13-15,2017.
  1. Ankur Jaiswal, H. P. Jawale,”Optimization of structural error in four-bar linkage with five accuracy points”,Proc. XII IPRoMM-2016 (Challenges in Manufacturing),VNIT Nagpur,22-23 Dec 2016.
  1. Ankur Jaiswal, H. P. Jawale,”Comparative study of structural error in four bar mechanism for hyperbolic functions”, IEEE International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS-2017), MNNIT Allahabad 3-5 February 2017.
  1. Gupta, A.K. Singh,” Shear Rate Dependence of Static Friction at a Soft Hydrogel-Glass Interface CHEMIX-2017 VNIT, Nagpur 25th-26th March, 2017.
  1. Gupta, A.K. Singh,”A friction model for rate dependent slip dynamics of tire-road interaction IPRoMM, 2016, VNIT, Nagpur 22-23 Dec, 2016.
  1. Sinha, A.K. Singh,”Chaotic behavior of the three state variable rate and state friction model”,Conference on non-linear system and dynamics, IISER, Kolkata 16-18 Dec, 2016.
  1. Singh, A.K., Singh, T.N,”A numerical study on a rock slope failure with Rate, State, and temperature and pore pressure friction (RSTPF) modelICCMS 2016, IIT Bombay, 27 June-1 July,2016.
  1. Sinha, N. and Singh, A. K.,”Frictional Stability of anti-plane sliding half spaces with rate, state and temperature friction Model”,INDOROCK 2016,IIT Bombay ,17 -18 th June, 2016.
  2. Arun K. Singh, Shraddha Gondane,”Behavior of Boundary Lubricated metal surfaces under low speed sliding and High Load conditions, CHEMIX-2016, VNIT, Nagpur April 2016.
  1. Rahul Mali, M. T. Telsang, T. V. K. Gupta,”Real time tool wear condition monitoring in hard turning of Inconel 718 using sensor fusion system”, ICAAMM-2016,Hyderabad,7-9, July,2016.
  1. Abhishek Tomy, Bhushan Zade, Gaurav Tiwari, T V K Gupta, Ravikumar D,” Influence of Friction Co-Efficient at Chip-Tool Interface on Orthogonal Cutting: Finite Element Analysis”,IPRoMM-2016,VNIT Nagpur,22-23 December,2016.
  1. Hanwate Y. and Gohil T. B.,”Computational Fluid Dynamics Analysis of Vertical Axis Darrieus Wind Turbine”,Fluid Mechanics and Fluid Power, MNNIT, Allahabad, Dec 15-17,2016
  1. Arunkumar H S, Chidanand Mangrulkar, Rahul Ikhar and Trushar Gohil,”Two – Dimensional Study of Cylinder Wake Interaction with the Flat Plate Boundary Layer with RANS Modeling”,Fluid Mechanics and Fluid Power, MNNIT, Allahabad, Dec 15-17, 2016.
  1. Saikat Das, Swapnil Soni, Saurabh Punyapwar and Trushar Gohil,” Numerical Study of Fluid Flow and Heat Transfer Inside a Twisted Square Duct”, Fluid Mechanics and Fluid Power MNNIT, Allahabad Dec 15-17, 2016.
  1. Rahul Khatri, Sachin Kanhurkar, Gautam Kumar, Ravikiran Balaga and Trushar Gohil,”CFD Approach of Laminar Forced Convection of Nanofluids over Staggered Circular Tube Banks”,Fluid Mechanics and Fluid Power MNNIT, Allahabad, Dec 15-17, 2016.
  1. Ankita Pujahari, Dixit Arya, Abhay Pratap Singh, Vandita Shahu and Trushar Gohil,”CFD Modeling of Dilute Particle Laden Flow in an U-Bend”, Fluid Mechanics and Fluid Power, MNNIT, Allahabad         Dec 15-17,2016.
  1. Rahul Kumar, Ajay Gedam, Gaurav Chaudhari, Hemant Kumar and Trushar Gohil,”Numerical Simulation of Impinging Jet over Flat Heated Surface Fluid Mechanics and Fluid Power”,MNNIT, Allahabad Dec 15-17,2016.
  1. Nikhil Sharma, Dipak Vaghani, Sushama Sahu and Trushar Gohil,” 3D Numerical Simulation of Plume Dispersion in Open Atmosphere”, Fluid Mechanics and Fluid Power, MNNIT, Allahabad Dec 15-17,.2016.
  1. Akshay Wagh, Asmita Rahatgaonkar, Samrat Patil, Sudhir Urkude and Trushar Gohil,”Numerical Investigation of Buoyancy-Driven Flow in a Horizontal Square Duct Heated from Below”,Fluid Mechanics and Fluid Power, MNNIT, AllahabadDec 15-17, 2016.
  1. Chinmayee Behera, Raju Sonkar, Rahul Mathurkar and Trushar Gohil,”Steady Natural Convection in a 2D Cavity Filled with a Porous Matrix Having Constant Temperature Heat Source”, Fluid Mechanics and Fluid Power, MNNIT, Allahabad, Dec 15-17,2016.
  1. Mahesh Sawardekar, Jayesh Warke, Karthik J. and Trushar Gohil,” Effect of Submerged Vortex Generator on a S-Duct Flow”,Fluid Mechanics and Fluid Power,MNNIT, Allahabad Dec 15-17,2016.
  1. Rajasekarababu K B, Paramananda Padhi, Abhijit Waghe and Trushar Gohil,”Numerical Simulation and Validation of Turbulent Flow around Surface Mounted Bluff Body”, Fluid Mechanics and Fluid Power, MNNIT, Allahabad,Dec 15-17,2016.
  1. Vivek Patel, Gaurav Tiwari, Ravikumar Dumpala,” Numerical study of crushing behaviour of circular frusta tube under eccentric loading”, XII IPRoMM,VNIT Nagpur,21-24 Dec, 2016
  1. Tiwari, M.A. Iqbal, P.K. Gupta,””Influence of Target Span and Boundary Conditions on Ballistic Limit of Thin Aluminum Plate”IMPLAST 2016,IIT DELHI,12-15 December,2016.
  1. Tiju Thomas, Gaurav Tiwari,”Crashworthiness behavior of honeycomb structure”, IMPLAST 2017 IIT DELHI,12-15 December,2016.
  1. Swapnil Shahane, Gaurav Tiwari,”Numerical Analysis of circular tube under quasi-static lateral compression for Aluminum 7005, 7075 using Ls-Dyna”,XII IPRoMMVNIT,21-24 Dec 2016.
  1. Suggala Sai Chaitanya, Solipuram Monisha, vaibhav Dhote, Gaurav Tiwari, Trushar Gohil,” Fluid Structure interation of a shock tube”,XII IPRoMMVNIT 21-24 December,2016.
  1. Vikas Gohil, Y. M. Puri,”Experimental study of material removal rate in electrical discharge turning of titanium alloy (Ti-6Al-4V), ICMAE 2016, Hong Kong,29-31 Dec. 2016.
  2. Sanjay K Sharma, Obaid ul H Ansari, V R Kalamkar,” Numerical Analysis of Solar Air Heater with Compound Turbulators”, FMFP2016, MNIT, Allahabad,15-17 Dec 2016.
  1. Ranjan Kishore Mallick, Thombre S B,”Effect of compressive force by clamping torque on performance of DMFC”,Proceeding: XII IPRoMM, Nagpur,22 and 23 Dec ,2016.
  1. Lautre N.K., Gupta P.K. and Jawalkar C, “Analysis of Material Removal in WEDM operation on E0300 Alloy Steel through Channel Coding”, paper ID 0500, The 7th TSME International conference on Mechnaical Engineering, Thailand, 13-16 December, 2016.
  1. Lautre N.K., Sharma A.K., Kumar P. and Das S., “Comparision of Microwave assisted and Conventional method for drilling of perspex”, paper ID 310, The 6th International & 27th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2016, India, 16-18 December, 2016.

54. Nikhil Bauskar, Rahul A Mali, T V K Gupta, “FEA Based Simulation and Experimental Analysis of Forces in Dry Milling of Inconel 718”, Atlantis Press: 2nd International Conference on Communication and Signal Processing (ICCASP 2016),Vol. 137,PP.206-211, 26-27,Dec 2016

  • S.N. Satish Idury, B.S. Murty and Jatin Bhatt “An atomic cluster model to understand localized deformation behavior inmetallic glass”, International Conference on Metals and Materials Research  (ICMR  2016),Indian Institute of Science, Bangalore,June 20-22, 2016.
  • Jatin Bhatt “Investigation on Mechanical Behavior of Nanocomposite derived from Zr based Metallic Glass”, 4th The International Conference on Advances in Materials and Materials Processing (ICAMMP-IV), Indian Institute of Technology, Kharagpur November 5-7,2016.(Invited)
  • S.N. Satish Idury, B.S. Murty and Jatin Bhatt “Indentation response on different substrates for Zr67Cu33 Metallic Glass ribbon”, 4th The International Conference on Advances in Materials and Materials Processing (ICAMMP-IV), Indian Institute of Technology, Kharagpur, November 5-7, 2016,
  • Jatin Bhatt “Materials Education at the Edge of Industrial Needs”54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India. November 2016. (Invited)
  • S.N. SatishIdury, K. Guruvidyathri, Kaivalya Deo, B.S. Murty and Jatin Bhatt “On high entropy bulk metallic glass formation in Zr-Ti-Cu-Ni-Al system based on binary eutectic cluster model and CALPHAD”, 54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India. November 2016, (Best Oral Presentation Award).
  • Sai Smaran, Arvindha Babu, Anuj Khond, Jatin Bhatt, Ajeet K. Srivastav, and Bhaskar Majumdar “Glass  forming ability, thermal stability and indentation characteristics of Hf-Cu-Ni metallic glasses”,54nd National Metallurgists day & 70th Annual Technical meeting (NMD ATM 2016), Indian Institute of Technology Kanpur, Kanpur, India ,November 2016.
  • S.N. Satish Idury, B.S. Murty and Jatin Bhatt  “On optimization of non equiatomic high entropy bulk metallic glass compositions: A thermodynamic modeling study, Workshop on High Entropy Alloys”,organized jointly by Indian Institute of Technology-Hyderabad and University of Hyderabad, Hyderabad, India, 11-12th March, 2017. (Invited)
  • Ritesh Kumar, Praveen, Azmeera Maibu, Vikram Hastak, Saurabh Kumar Rai, D.R. Peshwe and Ajeet K. Srivastav, “TiO2 nanoparticles for photocatalytic applications”, CHEMIX’17, Visvesvaraya National Institute of Technology Nagpur; March, 2017. (Best Paper Award)
  • VikramHastak, Saurabh Kumar Rai, Mangesh Lodhe, Niraj Chawake, Zahoor Ahmed Wani, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav, “In-Vitro cytotoxicity study of rGO-Fe3O4 nanocomposite for biomedical applications”, MRSI 2017, Indian Institute of Technology Bombay, Febraury,2017.
  • Sai Smaran, Anuj Khond, Arvinda Babu, Jatin Bhatt, Bhaskar Majumdar and Ajeet K. Srivastav, “Glass forming ability, thermal stability and indentation characteristic of Hf-Cu-Ni metallic glass”, NMD-ATM 2016, Indian Institute of Technology Kanpur; November, 2016.
  • Vikram Hastak, Saurabh Kumar Rai, Niraj Chawake, Mangesh Lodhe, Zahoor Ahmed Wani, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav: In-Vitro cytotoxicity study of superparamagnetic iron oxide (Fe3O4) nanoparticles for biological applications. NMD-ATM 2016, Indian Institute of Technology Kanpur; November,2016.
  • Vikram Hastak, Saurabh Kumar Rai, Niraj Chawake, Mangesh Lodhe, Dhananjay Kumar Singh, Suaib Luqman, D.R. Peshwe and Ajeet K. Srivastav, “Antibacterial activity of superparamagnetic iron oxide (Fe3O4) nanoparticles for biological applications” 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV, 2016), Indian Institute of Technology Kharagpur, November,2016.
  1. Nikhil Cherukupally, Akhil Madipelly, Sandeep Ganji, Ajay Pratap Singh, Ajeet K. Srivastav, “Synthesis and characterization of magnetic iron oxide nanoparticles using co-precipitation method”, CHEMIX’16, Visvesvaraya National Institute of Technology Nagpur, April, 2016.
  2. Dibya Jyoti Borah, P.K. Patowari, A. A Likhite, “Machinability Study of ADI Using Wire EDM”, XXX International Conference on Surface Modification Technologies (SMT 30), Milan, Itali, 29 June – 01 July, 2016.
  3. Jeetendra Kumar Malav, Ramesh C. Rathod, Suresh S. Umare, “Synthesis, Characterization and Anticorrosive performance of Electroactive polyimide/graphitic carbon nitride composites”, Surface Engineering and Paint Coatings with EXPO 2017, Pune,  February, 15-17, 2017.

  1. Ishwardas L Muthreja, Aniruddha Ghare, Rajendra Yerpude And Liladhar Dhote, “Feasibility Study of Overburden Material for Hydraulic Stowing in Mines”, SME Annual Conference & Expo and CMA 119th National Western Mining Conference, Denver, USA, Feb 2017.
  2. R.Thote, “Highwall mining: a new futuristic coal mining technology for recovery of locked coal”, First International conference on ‘Mining in Europe’ AIMS 2016″ organized by Aachen RWTH University, Aachen, Germany. pp.175, 17-19 May 2016
  3. R.Thote & Narendra Choudhari, “Implementation of new technology in Indian coal mining sector: a step towards sustainable development”, Int. conference on ‘Sustainable development and natural resources: global challenges and prospects, Saint Petersburg, Russia, 2016.
  4. R.Thote, Wajid Sohail, M.R. Saharan, “Effect of shape of opening on the stability of caverns: an experimental analysis”, Int. conference on Recent advances in rock Engineering, org  by NIRM, Bangalore, pp. 382, Nov.2016.
  5. R.Thote, “Societal Impacts on Blast Management in Quarries Near Urban Area, Int. Conference on Next Generation  Technologies  for Mining and Fuel Industries, Vighyan Bhavan, New Delhi  Org by DST, 2017.
  6. Kompally Karunakar, Malla Chaitanya, I. L. Muthreja, “Slope stability analysis by using Universal Distinct Element Code”, Proc. INDOROCK-2016, IIT Bombay, Mumbai, June 2016.
  7. Shashank Sharma, I.L. Muthreja, Jay Aglave; ” Variation of tunnel support loading in elasto-plastic rock mass with face advance”; Proc. INDOROCK-2016, IIT Bombay, Mumbai, June 2016.
  8. S.Gupte, “Optimisation of internal dump capacity and stability analysis in a coal mine  – a case study”, APSSIM 2016 Proceedings of the First Asia Pacific Slope Stability in Mining Conference, Brisbane, Queensland, Australia,  pp. 557-570, 6-8, September 2016
  9. Sahu P, Lokhande R D, Pradhan M & Jade R K “Study the variations of sinkhole depth with respect to working height in underground coal mines ”International Conference Recent Advances on Rock Engineering (RARE: 2016) at Bengaluru, India, Organized by, NIRM & ISRM, Bengaluru, INDIA, ISSN : 2352-5401 Vol: 91, pp. 547-551, November 2016.
  10. Jena S. K., Lokhande R D, Pradhan M & Prasad K, “Analysis of strata control monitoring in Indian underground coal mining for apprehension of strata movement, a case study from SECL”. International Conference Recent Advances on Rock Engineering (RARE: 2016) at Bengaluru, India, Organized by, NIRM & ISRM, Bengaluru, INDIA, ISSN: 2352-5401 Vol: 91, pp. 547-551, November 2016.