| Sr. No. | Authors | Department | Title | Source title | Document Type |
| 1 | Raut A.; Meshram S.; Raut P.; Thakre A.A. | Mechanical Engineering | Advancements and challenges in understanding gastrointestinal stromal tumors: A comprehensive review | Multidisciplinary Reviews | Review |
| 2 | Kumar M.N.; Tiwari G.; Baral S.K.; Ratna Sunil B.; Dumpala R. | Mechanical Engineering | Numerical investigation of the effect of laser peen forming process parameters on 1060 aluminium sheets under preload | Engineering Research Express | Article |
| 3 | Loyte A.; Suryawanshi J.; Bellala S.S.K.; Marode R.V.; Devarajan Y. | Mechanical Engineering | Current status and obstacles in the sustainable synthesis of biohydrogen from microalgal species | Results in Engineering | Review |
| 4 | Raghu Ram Mohan R.K.; Muthadi S.R.; Venkata R.K.; Dumpala R.; Ratna Sunil B. | Mechanical Engineering | Mechanical performance of dissimilar Al6082 aluminum and AZ91 magnesium alloy joints produced by friction stir welding | Engineering Research Express | Article |
| 5 | Pungle R.; Andhare A.; Pungle D. | Mechanical Engineering | Experimental results on position and path control of an automated guided vehicle using fixed camera at ceiling and color markers | IAES International Journal of Robotics and Automation | Article |
| 6 | Tarodiya R.; Levy A. | Mechanical Engineering | Numerical investigation of collision characteristics of non-spherical particles on ductile surfaces under normal impact | Computational Particle Mechanics | Article |
| 7 | Shanthan V.; Suryawanshi J.; Tarodiya R.; Loyte A.; Devarajan Y.; Kaliappan N. | Mechanical Engineering | Numerical analysis of spray characterization of blends of hydrous ethanol with diesel and biodiesel | Scientific Reports | Article |
| 8 | Jakhotiya Y.; Rahul M.R.; Chiddarwar S.S. | Mechanical Engineering | Integrating digital twin and computer vision system for efficient pick-and-place operation using Tecnomatix Process Simulate | International Journal on Interactive Design and Manufacturing | Article |
| 9 | Misar A.E.; Thombre S.B. | Mechanical Engineering | Thermal management of Li-ion battery pack using potting material and air cooling for electric two-wheelers | Journal of Energy Storage | Article |
| 10 | Kumar N.M.S.; Suresh G.; Dumpala R.; Bradagunta R.S. | Mechanical Engineering | In vitro Degradation Studies on Mg-Zn-CeO2 Composites for Biodegradable Implant Applications | Biointerface Research in Applied Chemistry | Article |
| 11 | Umate T.B.; Sawarkar P.D. | Mechanical Engineering | Thermal performance evaluation of aerogel-enhanced polyurethane insulation panels for refrigerated vehicles: A numerical and experimental study | Thermal Science and Engineering Progress | Review |
| 12 | Buradagunta R.S.; Madiga J.; Dumpala R. | Mechanical Engineering | Producing Calcium Deficient Nano-hydroxyapatite from Silver pomfret Fish Bones for Biomedical Applications | Letters in Applied NanoBioScience | Article |
| 13 | Motghare S.V.; Ashtankar K.M.; Lautre N.K. | Mechanical Engineering | Experimental investigation of electrochemical and mechanical properties of stainless steel 309L at different built orientation by cold metal transfer assisted wire arc additive manufacturing | Materials Today Communications | Article |
| 14 | Dongare S.; Peetala R.K.; Gohil T.B.; Agrawal N.; Jadhav A. | Mechanical Engineering | Transient heat flux assessment using a platinum thin film sensor for short-duration applications | Heat and Mass Transfer/Waerme- und Stoffuebertragung | Article |
| 15 | Soni S.; Ranjan A.; Gohil T.B. | Mechanical Engineering | Evaluating approaches to accurately compute electro-vortex flows in liquid metal electrodes | Computers and Fluids | Article |
| 16 | Jiwane V.; Tiwari G.; Goel M.D.; Andraskar N.; Sirdesai N.; Venkateswaran K.P. | Mechanical Engineering | Crashworthiness of Ultrathin Aluminum Honeycomb Structure | Mechanics of Solids | Article |
| 17 | Jain A.; Jawale H.P. | Mechanical Engineering | Investigation of parasitic motion in 3-RRS parallel manipulator | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Article |
| 18 | Jain A.; Jawale H. | Mechanical Engineering | Comparison of 3-[PP]S-Y Spatial Parallel Manipulators based on link tolerances and parasitic motions | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Article |
| 19 | Satyanarayana C.P.; Raju L.S.; Dumpala R.; Sunil B.R. | Mechanical Engineering | A review on strategies to enhance the performance of the titanium based medical implants | Materials Today Communications | Review |
| 20 | Ammu V.N.S.U.V.; Padole P.; Agnihotri A.; Dumpala R. | Mechanical Engineering | Numerical and experimental investigations on AA6063 extrudates: effect of number of portholes on extrusion load and weld strength | Engineering Research Express | Article |
| 21 | Koppu A.K.; Motwani A.; Lautre N.K.; Bhishnurkar A.D. | Mechanical Engineering | Performance evaluation of interfacial characteristics between cold metal transfer-wire arc additive manufactured SS308LSi and wrought SS304L with controlled and uncontrolled interlayer temperature | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | Article |
| 22 | Sonwane S.; Chiddarwar S. | Mechanical Engineering | Developing a DSS for Enhancing Weldment Defect Detection, Classification, and Remediation Using HDR Images and Adaptive MDCBNet Neural Network | Journal of Nondestructive Evaluation | Article |
| 23 | Jawale H.P.; Choudhari R.G.; Thorat H.T. | Mechanical Engineering | Study on transmission angle and singularity in 5R planar mechanism | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Article |
| 24 | Vasu C.; Andhare A.B.; Dumpala R. | Mechanical Engineering | Machinability and tool wear studies on AZ91/B4C metal matrix composites using uncoated and CVD diamond coated WC-Co turning inserts | International Journal of Refractory Metals and Hard Materials | Article |
| 25 | Khullar S.; Tarodiya R.; Kumar S. | Mechanical Engineering | Study of erosion-induced leakage flow in guide vane of Francis turbine using erosion-coupled mesh deformation simulations | Powder Technology | Article |
| 26 | Sonwane S.; Chiddarwar S. | Mechanical Engineering | Enhancing weld defect detection and classification with MDCBNet: A Multi-Scale Dense Cross Block Network for Improved explainability | NDT and E International | Article |
| 27 | Tatte R.; Thorat H.; Jawale H. | Mechanical Engineering | Optimization of higher-order S-curve motion profile using unitization method aiming to reduce the vibration of a lightly damped system | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Article |
| 28 | Rahul M.R.; Chiddarwar S.S. | Mechanical Engineering | Deep Reinforcement Learning with Inverse Jacobian based Model-Free Path Planning for Deburring in Complex Industrial Environment | Journal of Intelligent and Robotic Systems: Theory and Applications | Article |
| 29 | Tajne A.; Shrivastava P.K.; Joshi Y.G.; Gupta T.V.K. | Mechanical Engineering | Optimization of Cutting Forces and Surface Roughness in Turning Haynes 25 Superalloy | Sustainable Civil Infrastructures | Conference paper |
| 30 | Sonwane S.; Chiddarwar S. | Mechanical Engineering | Automatic weld joint type recognition in intelligent welding using image features and machine learning algorithms | Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM | Article |
| 31 | Andraskar N.; Tiwari G.; Goel M.D. | Mechanical Engineering | Numerical Investigation on the Ballistic Response of Alumina/Dyneema Composite Structure | Lecture Notes in Civil Engineering | Conference paper |
| 32 | Mali R.; Gupta T.V.K. | Mechanical Engineering | A COMPARATIVE EVALUATION AND ANALYSIS OF FREE-FORM SURFACE DEVIATIONS USING ARTICULATED ARM CMM AND 3D SCANNER | UPB Scientific Bulletin, Series D: Mechanical Engineering | Article |
| 33 | Tarodiya R.; Gandhi B.K. | Mechanical Engineering | 3D Numerical Flow Field Investigation of Centrifugal Slurry Pump with Water | Lecture Notes in Mechanical Engineering | Conference paper |
| 34 | Andraskar N.D.; Tiwari G.; Goel M.D. | Mechanical Engineering | Experimental and Numerical Investigation of the Ballistic Response of Alumina 99.7% Covered with Aluminum 6061-T6 Face Sheets | Journal of Materials Engineering and Performance | Article |
| 35 | Lautre N.K. | Mechanical Engineering | Mapping of WEDM Output from Designed Experiments to Binary Symmetric Channel | Lecture Notes in Networks and Systems | Conference paper |
| 36 | Kulkarni R.D.; Mali R.A.; Gupta T.V.K. | Mechanical Engineering | Application of Evolutionary Computational Algorithms to Estimate Responses in Milling Al 7075 | Lecture Notes in Electrical Engineering | Conference paper |
| 37 | Souripalli P.K.; Sayed L.J.; Chiddarwar S.S. | Mechanical Engineering | Autonomous Navigation of Drones Using Explainable Deep Reinforcement Learning in Complex Environments | Proceedings of World Multi-Conference on Systemics, Cybernetics and Informatics, WMSCI | Conference paper |
| 38 | Shahane S.; Tiwari G.; Andraskar N. | Mechanical Engineering | Crushing Response of Al 7005 and 7075 Tubes against Transverse Loading | Mechanics of Solids | Article |
| 39 | Tajne A.; Ramani H.; Joshi Y.; Gupta T.V.K. | Mechanical Engineering | Taguchi based approach for multiparameter optimization in Turning Haynes 25 | Journal of Physics: Conference Series | Conference paper |
| 40 | Lautre N.K. | Mechanical Engineering | Current Scenario, Future Scope, and Challenges in Welding | Advanced Welding Techniques: Current Trends and Future Perspectives | Book chapter |
| 41 | Vasu C.; Andhare A.B.; Dumpala R. | Mechanical Engineering | Investigation on the machining characteristics of AZ91 magnesium alloy using uncoated and CVD-diamond coated WC-Co inserts | Machining Science and Technology | Article |
| 42 | Sayed L.J.; Souripalli P.K.; Chiddarwar S.S. | Mechanical Engineering | Autonomous Navigation of Drones Using Explainable Deep Reinforcement Learning in Foggy Environment | 2024 IEEE Students Conference on Engineering and Systems: Interdisciplinary Technologies for Sustainable Future, SCES 2024 | Conference paper |
| 43 | Sunil B.R.; Reddy K.R.R.M.; Dumpala R. | Mechanical Engineering | Investigating the weld joint characteristics of AZ31 and AZ91 magnesium alloys produced by friction stir welding | Canadian Metallurgical Quarterly | Article |
| 44 | Baral S.K.; Thawre M.M.; Sunil B.R.; Dumpala R. | Mechanical Engineering | Effect of heat treatment on wear and corrosion behaviour of ZE41 magnesium alloy | Canadian Metallurgical Quarterly | Article |
| 45 | Suresh A.; Kondaiah V.V.; Dumpala R.; Sharma A.; Ratna Sunil B. | Mechanical Engineering | The role of aluminium content on the corrosion initiated mechanical failure of AZ series magnesium alloys | Materials Today: Proceedings | Conference paper |
| 46 | Vardhan V.S.S.H.; Sharma A.; Dumpala R.; Buradagunta R.S. | Mechanical Engineering | A Short Review on the Development of Rare Earths Containing Magnesium Alloys for Biomedical Applications | Lecture Notes in Mechanical Engineering | Conference paper |
| 47 | Khaire N.; Tiwari G.; Iqbal M.A. | Mechanical Engineering | Ballistic response and energy dissipation characteristic of single and double curvature shell against projectile impact: a comparative study | Mechanics Based Design of Structures and Machines | Article |
| 48 | Rathod S.; Tiwari G. | Mechanical Engineering | Optimizing the high velocity impact response of an aramid composite structure through a parametric study | Mechanics Based Design of Structures and Machines | Article |
| 49 | Tajne A.; Gupta T.V.K.; Ramani H.; Joshi Y. | Mechanical Engineering | A critical review on the machinability aspects of nickel and cobalt based superalloys in turning operation used for aerospace applications | Advances in Materials and Processing Technologies | Review |
| 50 | Sonwane S.; Chiddarwar S.; Dalvi M.; Rahul M.R. | Mechanical Engineering | Image-Based Weld Joint Type Classification Using Bag of Visual Words | Smart Innovation, Systems and Technologies | Conference paper |
| 51 | Andraskar N.; Tiwari G.; Goel M.D. | Mechanical Engineering | Ballistic Impact Simulation of Alumina Using Smoothed Particle Hydrodynamics (SPH) Method | Springer Proceedings in Materials | Book chapter |
| 52 | Tambe P.; Tiwari G.; Andraskar N.; Jain U. | Mechanical Engineering | Investigating crashworthiness of W-Beam guardrail crash barriers | International Journal of Crashworthiness | Article |
| 53 | Rathod S.; Tiwari G.; Khaire N. | Mechanical Engineering | Experimental and Numerical Investigation of High Velocity Response of Aramid Honeycomb Core Sandwich Structure | Springer Proceedings in Materials | Book chapter |
| 54 | Tiwari G.; Hamsi S.L.S. | Mechanical Engineering | Ballistic Response of Composite Helmet | Springer Proceedings in Materials | Book chapter |
| 55 | Burad P.; Chaitanya G.; Thawari N.; Gupta T.V.K. | Mechanical Engineering | Microstructure evolution and hardness enhancement of LMD Inconel 718 multilayer in as-deposited and post heat treated: A comparative study | Advances in Materials and Processing Technologies | Article |
| 56 | Saptal V.; Tiwari G.; Thomas T. | Mechanical Engineering | Effect of Adding Expanded Polypropylene and Polyurethane Foams on Crashworthiness Response of the Aluminium-Reinforced Honeycomb Structure | Springer Proceedings in Materials | Book chapter |
| 57 | Jaiswal A.; Jawale H.P. | Mechanical Engineering | Estimation of error in four-bar mechanism under dimensional deviations | International Journal on Interactive Design and Manufacturing | Article |
| 58 | Koppu A.K.; Lautre N.K.; Motwani A.; Hajare D. | Mechanical Engineering | CMT-WAAM deposition strategies for thin overhanging disc of SS308LSi and investigation of mechanical and microstructural characteristics | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Article |
| 59 | Kaware K.; Kotambkar M. | Mechanical Engineering | Hybridization effect of Kevlar and glass fiber on carbon/epoxy composites to enhance the damage strength under low velocity impact. Part II: Numerical simulations | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Article |
| 60 | Ganguwar S.; Nistane V.M. | Mechanical Engineering | Numerical Study on the Determination of Crack Initiation Angle, Stress Field and Stress Triaxiality at Crack Tip in a Cracked Beam of Functionally Graded Material | Journal of Failure Analysis and Prevention | Article |
| 61 | Mishra A.; Kane P.; Gundewar S. | Mechanical Engineering | Gear Fault Classification using Feature Selection and Machine Learning Techniques | AIP Conference Proceedings | Conference paper |
| 62 | Sharma S.K.; Kalamkar V.R.; Ganguly V.R.; Pande R.R.; Jha A. | Mechanical Engineering | Design and manufacturing aspects of ribs with application in the solar air heater | International Journal on Interactive Design and Manufacturing | Article |
| 63 | Sontakkey A.; Kotambkar M.; Kaware K. | Mechanical Engineering | Characterisation of the lightning strike damage mechanics onto composite materials and discussion on its numerical modelling techniques: review | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Review |
| 64 | Abhilash K.; Jadhav A.; Kalamkar V.R.; Jilte R.D. | Mechanical Engineering | Numerical study on thermal runaway in a cell and battery pack at critical heating conditions with variation in heating powers | Journal of Energy Storage | Article |
| 65 | Ghiwe S.S.; Kalamkar V.R.; Sawarkar P.D. | Mechanical Engineering | A combined combustion and conjugate heat transfer analysis of a hybrid draft biomass cookstove | Thermal Science and Engineering Progress | Article |
| 66 | Motwani A.; Kumar A.; Talekar A.; Puri Y. | Mechanical Engineering | Process parameters optimization for cold metal transfer-deposited IN625 single-layer bead features by entropy weightage-assisted grey-based Taguchi analysis | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | Article |
| 67 | Bardhan S.; Roga S. | Mechanical Engineering | Hypertension detection and indexing from cardiac ECM image analysis | Multimedia Tools and Applications | Article |
| 68 | Roga S. | Mechanical Engineering | Sessional Solar Energy Assessment and Economic Feasibility Analysis | Lecture Notes in Electrical Engineering | Conference paper |
| 69 | Raut D.; Ukirde S.; Kalamkar V.R.; Misra A. | Mechanical Engineering | Predicting the Effect of Hub to Shroud Ratio on NPSH 3% of Pump | Lecture Notes in Mechanical Engineering | Conference paper |
| 70 | Abhilash K.; Kalamkar V.R.; Sharma S.K. | Mechanical Engineering | Numerical Study of Thermal Runaway of a Lithium-Ion Cell at Critical Conditions with Different Cooling Mediums | Lecture Notes in Mechanical Engineering | Conference paper |
| 71 | Roga S. | Mechanical Engineering | Performance analysis of a planar shaped strut injector based supersonic combustion chamber | International Journal of Turbo and Jet Engines | Article |
| 72 | Kaware K.; Kotambkar M. | Mechanical Engineering | Effect of Oblique and Off-Center Impact on CFRP Laminate Under Low Velocity Impact | Iranian Journal of Science and Technology – Transactions of Mechanical Engineering | Article |
| 73 | Kaware K.; Kotambkar M. | Mechanical Engineering | Experimental investigation of hybridization effect of Kevlar and Glass fibers on CFRP composite under low velocity impact | International Journal of Crashworthiness | Article |
| 74 | Ghiwe S.S.; Kalamkar V.R.; Sawarkar P.D. | Mechanical Engineering | Performance Optimization of Hybrid Draft Biomass Cookstove Using CFD | Combustion Science and Technology | Article |
| 75 | Ghiwe S.S.; Kalamkar V.R.; Kshirsagar M.P.; Sawarkar P.D. | Mechanical Engineering | The Influence of Stove Materials on the Combustion Performance of a Hybrid Draft Biomass Cookstove | Combustion Science and Technology | Article |
| 76 | Umate T.B.; Sawarkar P.D. | Mechanical Engineering | A review on thermal energy storage using phase change materials for refrigerated trucks: Active and passive approaches | Journal of Energy Storage | Review |
| 77 | Patil A.; Jayale V.; Arunachalam K.P.; Ansari K.; Avudaiappan S.; Agrawal D.; Kuthe A.M.; Alharbi Y.R.; Amir Khan M.; Roco-Videla Á. | Mechanical Engineering | Performance Analysis of Self-Compacting Concrete with Use of Artificial Aggregate and Partial Replacement of Cement by Fly Ash | Buildings | Article |
| 78 | Kothekar K.P.; Thombre S.B.; Shrivastava N.K. | Mechanical Engineering | A simple fuel cell model fitting and parameter estimation apriori to the experimental domain of AC impedance techniques | International Journal of Hydrogen Energy | Article |
| 79 | Thawkar V.; Dhoble A.S.; Shewalkar A.G. | Mechanical Engineering | Enhanced thermal management of electric vehicle lithium-ion batteries with Al2O3–MWCNT–ethylene glycol hybrid nanofluid-based helical coiled pulsating heat pipe (HC-PHP) | Journal of Thermal Analysis and Calorimetry | Article |
| 80 | Shewalkar A.G.; Dhoble A.S.; Thawkar V.P. | Mechanical Engineering | Review on cooling techniques and analysis methods of an electric vehicle motor | Journal of Thermal Analysis and Calorimetry | Article |
| 81 | Patil P.G.; Seow L.L.; Uddanwadikar R.; Pau A.; Ukey P.D. | Mechanical Engineering | Crestal strain of two-implant mandibular overdentures with implants placed at different positions: An in vitro 3D printed simulation study | Journal of Prosthetic Dentistry | Article |
| 82 | Adhaye A.M.; Jolhe D.A. | Mechanical Engineering | GAIT MEASUREMENT METHODS: SYSTEMATIC REVIEW AND COMPARATIVE STUDIES | Journal of Mechanics in Medicine and Biology | Review |
| 83 | Nistane V. | Mechanical Engineering | Optimum prediction model of remaining useful life for rolling element bearing based on integrating optimize health indicator (OHI) and machine learning algorithm | World Journal of Engineering | Article |
| 84 | Motwani A.; Puri Y.M.; Koppu A.K.; Vamsi P.K. | Mechanical Engineering | Multi-response Optimization of Electro-Discharge Machining Parameters by Using Jaya Algorithm for Thin Wire-Arc Additive Manufactured IN625 Surface | Lecture Notes in Electrical Engineering | Conference paper |
| 85 | Panda S.; Banerjee A.; Baxy A.; Manna B. | Mechanical Engineering | Analysis of Moving Loads on Beams Using Surrogate Models Inspired from Artificial Neural Network | Lecture Notes in Civil Engineering | Conference paper |
| 86 | Dhakare S.; Wathore R.; Bherwani H.; Gupta A.; Dhoble A.S.; Labhasetwar N. | Mechanical Engineering | Design Optimization of an Improved Mud Cookstove Using Computational Fluid Dynamics | Combustion Science and Technology | Article |
| 87 | Jain A.; Uddanwadikar R. | Mechanical Engineering | A Systematic Review on the Proposed Methodologies for the Treatment of TMD Patients | Lecture Notes in Mechanical Engineering | Conference paper |
| 88 | Tambekar R.J.; Dhoble A.S. | Mechanical Engineering | CFD Analysis for the Study of Automotive Underhood Aerodynamics and Thermal Management | Lecture Notes in Mechanical Engineering | Conference paper |
| 89 | Patil S.; Dhoble A.; Sathe T.; Thawkar V. | Mechanical Engineering | Predicting Performance of Solar updraught Tower using Machine Learning Regression Model | Australian Journal of Mechanical Engineering | Article |
| 90 | Ganguwar S.; Nistane V.M. | Mechanical Engineering | Evaluation of fracture behavior of functionally graded material using SEN specimen | Journal of the Brazilian Society of Mechanical Sciences and Engineering | Article |
| 91 | Soni P.K.; Singh A.K. | Mechanical Engineering | Numerical Simulation of Failure of a Rock Slope with Tension Crack Under Blast Loading | Springer Proceedings in Materials | Book chapter |
| 92 | Shahu V.T.; Thombre S.B. | Mechanical Engineering | Theoretical and experimental investigation of cylindrical air gap membrane distillation system and effect of the membrane support net on its performance | Environmental Science and Pollution Research | Article |
| 93 | Deshpande Y.V.; Raut S.; Madankar T.A.; Andhare A. | Mechanical Engineering | Influence of biodegradable coolants on machinability improvement–a review | Advances in Materials and Processing Technologies | Review |
| 94 | Nirmale S.; Sharma A.; Pinjari A.R. | Mechanical Engineering | Multi-vehicle anticipation-based driver behavior models: a synthesis of existing research and future research directions | Transportation Letters | Article |
| 95 | Jachak S.; Gaurkar S.; Thakre A.; Jachak M.; Sunheriya N.; Kamble P. | Mechanical Engineering | Measurement of flank wears using edge detection method | Recent Advances in Materials Manufacturing and Machine Learning | Book chapter |
